MSDS_BASWAphon 407 BASWAphon Base (UK).pdf

Safety data sheet in compliance with (EC) Regulation no. 1907/2006Registered Trade Name: BASWAphon 407; BASWAphon BaseProduct.-no.: a007 Version: bc2.y2.09 page 6 of 10Date of impression: 17.03.2009 revised on: 17.02.2009pH (20 °C) 7.0 to 8.0 Laboratory BASWAMelting point / - range (+°C) approx. 0°C as for waterBoiling point (°C)approx.as for water100 Ignition point (°C) none non inflammableExplosion hazard none non inflammableLower explosion limit none non inflammableUpper explosion limit none non inflammableIgnition temperature (°C) none non inflammableFire-promoting properties noneVapour pressure (°C)not testedDensity (g/cm 3 )1700 to 1800 Laboratory BASWABulk density (kg/m 3 )not applicableSolubility in water (g/l at 20°C)not applicablePartition coefficient n-octanol / 1.51 Laboratory BASWAwater (K ow )Dynamic viscosity (mPas/20 °C) 7000 to 8000 Viscosimeter VT2-Plus (co. Thermo)Flow timenot determinedVapour pressurenot determinedEvaporation speednot determinedSolvent separation testnot determinedSolvent content 15.8 % Laboratory BASWA WaterConductivitynot determinedMelting point / melting rangenot determinedCorrosionnot determinedMiscibility possible in waterGas groupnot applicableSpontaneous ignitiontemperaturenonenon inflammable9.3 Other Details:The data given in Section 9 are typical values for the product and cannot be considered asproduct or supply specifications.______________________________________________________________________________10. STABILITY AND REACTIVITY10.1 Conditions to be avoided:Protect from frost and heat. See Section 7 – no decomposition when stored normally.See also combustion products according to Section 5.10.2 Materials to be avoided:none