SAVE - Enco

LathesFeatures:• Full-length splashguard• 2 hp, 220v, 1-ph. motor• Bed is hardened and groundwith reinforced cross ribs• D1-4 camlock spindle• 3-year warranty on DRO14" x 40" Geared Head Gap Bed Bench LathesMachinery ManualsSAVEUP TO $901As Low As$5,049 95Standard Equipment• 6" 3-Jaw Chuck• 8" 4-Jaw Chuck• 10" Faceplate• Steady Rest• Follow Rest• 3 MT Dead Center• 4-Way Tool Post• Chip Pan• Toolbox• Threading DialWt. Reg. SaleDescription Lbs. Model # Price PriceBench Lathe Only 1100 JS328-6153 $5,610.25 $5,049.95Bench Lathe with Cabinet Stand 1270 JS328-6135 6,096.98 5,495.95Bench Lathe with ACU-RITE ® VUE 2-AxisDRO System Installed and Cabinet Stand 1320 JS328-6134 7,496.98 6,595.951 year limited warranty!SpecificationsSwing Over Bed: 14"Swing Over Cross Slide: 8"Distance Between Centers: 40"Swing Over Gap: 20"Spindle Bore Taper:5 MTCenter Taper:3 MT18 Spindle Speeds: 70-1500 rpmLongitudinal Feeds: .002-.024"Cross Feeds: .001-.012"40 Inch Threads: 4-112 tpi22 Metric Threads: .25-6mmCross-Slide Travel: 6"TailstockSpindle Travel: 4"Center Taper:3 MTBed Width: 7 1 ⁄8"Gap Width: 8"13" x 40" & 14" x 40" GearedHead Gap Bed Engine Lathes8 Speeds, 90 to 1800 rpm• Jog button for easy gear engagementand spindle inching• Quick speed changes• Splash lubrication in headstock• Totally enclosed gearbox• Hardened and ground bedways• Spindle with tapered roller bearings• 3-year warranty on DROSAVEUP TO $809Starting At$5,6991-YEAR LIMITEDWARRANTY24Specifications 13" x 40" 14" x 40"Swing Over Bed: 13" 14"Swing Over Gap: 19" 20"Length of Gap: 9 3 ⁄8" 9 3 ⁄8"Swing Over Cross Slide: 7" 8 1 ⁄2"Swing Over Compound: 3 1 ⁄2" 3 1 ⁄2"Carriage Travel: 37 1 ⁄2" 37 1 ⁄4"Long. Feed Range(In./Rev.): .0012-.0294" .0012-.0294"40 Inch Threads: 4-112 tpi 4-112 tpi22 Metric Threads: .45-7.5mm .45-7.5mmCross-Slide Travel: 6" 6"Cross-Slide Feed Range: .0003-.0100" .0003-.0100"Compound Travel: 3 1 ⁄2" 3 1 ⁄2"Tailstock Spindle Travel: 4 3 ⁄4" 4 3 ⁄4"Tailstock Taper: 3 MT 3 MTSpindle Nose Mounting: D1-4 D1-4Spindle Bore Dia.: 1 7 ⁄16" 1 7 ⁄16"Spindle Taper: 5 MT 5 MTMotor & Electrics: 3 hp, 220v 3 hp, 220v, 3 ph.Machine Dimensions: 71 3 ⁄4L x 31W x 45 5 ⁄8"H 71 3 ⁄4L x 31W x 49 1 ⁄8"HStandard Equipment• 4-Way Tool Post• Backplate• Steady and Follow Rests• Chip Pan• 12" Faceplate• Coolant System• Live and Dead Centers• Foot Brake• Splashguard• 6" 3-Jaw and 8" 4-Jaw ChucksShown with DROThe RIGHT TOOL at the RIGHT PRICEWt. Reg. SaleDescription Lbs. Model # Price PriceEngine Lathe ONLY13" x 40" 1940 JS319-9733 $5,998.98 $5,699.0014" x 40" 1940 JS308-0232 6,598.98 5,939.00Engine Lathe with ACU-RITE ® VUE2-Axis DRO Installed13" x 40" 1976 JS319-9734 7,498.98 6,749.0014" x 40" 1976 JS308-0235 8,098.98 7,289.00