bly Instructions - Aros Hydraulik GmbH

More documents

Recommendations

Info

General Operating and Assembly Instructionsfor Hydraulic Cylinders12.3 Fitting the guide sealsFig. 23Fig. 24Fig. 25Insert the seal in its groove usinga flat-blade screwdriver withrounded blade edges.Check that the seal has been fittedcorrectly.Deform the guide strip to suit thecorresponding diameter of theguide and insert it into the correctgroove.Fig. 26Fig. 27Fig. 28Perform the step shown in Fig. 25for all guide strips.Check that the guide strips havebeen correctly installed.Check the groove for the PTFEseals for damage and contamina-tion.22/26AROS Hydraulik GmbH BA0001 Issue Nov. 2012
General Operating and Assembly Instructionsfor Hydraulic CylindersFig. 29Fig. 30Fig. 31Insert the O-ring into itsgroove.The PTFE seal can either be installedusing a special tool or, alternatively,between two fingers.To ease fitting in the groove, deformthe PTFE seal into a kidneyshape.Fig. 32Fig. 33Fig. 34Make sure the non-deformedside is inserted into the groovefirst.Then press the rest of the sealinto the groove.Insert the rod seal.23/26AROS Hydraulik GmbH BA0001 Issue Nov. 2012
Page 2 and 3: General Operating and Assembly Inst
Page 26: General Operating and Assembly Inst

bly Instructions - Aros Hydraulik GmbH

Create successful ePaper yourself

Delete template?

Save as template?