Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Surface processingwww.ambitex.pt184
Outstanding surface finishes for stainless steel,wood and paint.When it comes to surface processing, only one factor counts:flawless results in every respect. Whether you’re sanding orpolishing, with the extensive range of <strong>FEIN</strong> power tools andspecially designed professional sets you are in the best possibleposition to satisfy the exact specified requirements in surfacefinish. This is equally true for stainless steel machining,woodworking, interior fitting, renovation, vehicle or boatrepairs and special vehicle construction. <strong>FEIN</strong> is the name youcan count on:with powerful, virtually indestructible power tools, excellentergonomics for minimum fatigue and maximum efficiency,and practical accessories – for perfect results.You will find more surface processing products in the chapterson Oscillation and Stationary Belt Grinders.Sanders Page 188The perfect tools for rough sanding and finesanding of surfaces, pipes and profiles.Polishers Page 211Protecting and caring for sensitive andhigh-quality surfaces.Vacuum cleaners Page 219For clean results and safe, healthyworking conditions.SurfaceprocessingOscillators Page 222Sanding, cleaning, polishing, sawing andmuch more. <strong>FEIN</strong> oscillators for all jobs inawkward locations and on smaller surfaces.GRIT Page 174Stationary belt grinders for belt, radialand circular grinding. Modular conceptfor cost-effective extension.185
Surface processingThe right products for high-qualitysurfaces and a clean job.Sanders Model PageWSG 14-70 E Powerful compact angle grinder with variable speed for working with stainless steel. 189WSG 14-70 E Stainless steel starter set for preparing to finish surfaces, pipes and profiles. 190WPO 14-25 E Extremely powerful sander/polisher for cool machining of stainless steel surfaces. 192WPO 14-25 E Stainless steel starter set for standard applications in surface machining. 193ROT 14-200 EExtremely powerful rotary grinder for high material removal on metal, wood, coatings andfibreglass-reinforced plastics (FRP).196RS 10-70 E Handy, compact pipe sander for stainless steel pipes with a diameter of up to Ø 45 mm. 198RS 12-70 EPipe sander with extremely high sanding capacity for stainless steel pipes and pipe bends up to80 mm in diameter.199RS 12-70 E Stainless steel starter set for standard applications in pipe machining. 200BF 10-280 E Extremely powerful belt file for corners and edges in stainless steel machining. 202BF 10-280 E Start set belt file for corners and edges in stainless steel machining. 203KS 10-38 E Fillet weld sander for difficult-to-reach spots in metal constructions. 205MSf 636-1 Extremely powerful eccentric sander with optimum dust extraction for all surfaces. 207M 10000-5 Compact pneumatic eccentric sander for industry and manual trades up to Ø 125 mm. 209M 10000-6 Compact pneumatic eccentric sander for industry and manual trades up to Ø 150 mm. 209Polishers Model PageWPO 14-15 E Extremely powerful angle polisher for vehicle and boat repairs. 212WPO 14-15 XE Extremely powerful angle polisher for vehicle repairs. 213WPO 14-15 E Polishing set for boat repairs. 214WPO 10-25 E Powerful easy-to-use angle polisher for refurbishing paintwork. 215WPO 14-25 E Extremely powerful angle polisher for refurbishing paintwork. 216Vacuum cleaners Model PageDustex 25Dustex 40Compact wet and dry dust extractor for connecting power tools when working in the workshopand for assembly work.Powerful wet and dry dust extractor for connecting power tools when working in the workshopand for assembly work.220220186
Application Material Technical features EquipmentRough sandingFine sandingDry sandingMicro-sandingpolishingMetal (stainless steel,copper and copperalloys, aluminium)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substanceInput(W)Speed, no load(rpm)Weight accordingto EPTA(kg) 1 200 2 500-7 000 2,4 1 200 2 500-7 000 2,4 1 200 900-2 500 2,5 230 230 M 14 1 200 900-2 500 2,5 230 230 M 14 1 200 900-2 500 2,6 150/200 150/200 M 14 Polishing disc Ø(mm)Sanding pad Ø(mm)Mounting threadBelt speed(m/sec)Pipes up to Ø(mm)Stroke(mm)<strong>FEIN</strong>high-power motorSuctionSpindle lockRestart protectionSoft start800 2 500-7 000 2,9 3,5-11 8-45 1 200 2 700-7 000 3,8 22 8-80 1 200 2 700-7 000 3,8 22 8-80 800 10 000-28 000 2,1 12-32800 10 000-28 000 2,1 12-32800 1 350-3 750 3,2 380 8 800 2,4 150 150 5/16 in 8,4 10 000 1,2 125 125 5/16 in 5,0 10 000 1,2 150 150 5/16 in 5,0 Application Material Technical features EquipmentRough sandingFine sandingMicro-sandingpolishingDry sandingMetal (stainless steel,copper and copperalloys, aluminium)Wood (natural andvarnished)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substanceInput(W)Speed, no load(rpm)Weight accordingto EPTA(kg) 1 200 500-1 500 2,5 230 M 14 1 200 200-1 500 2,5 230 M 14 1 200 500-1 500 2,5 230 M 14 800 900-2 500 2,2 150 M 14 1 200 900-2 500 2,5 230 M 14 Polishing disc Ø(mm)Mounting thread<strong>FEIN</strong>high-power motorSuctionSpindle lockRestart protectionSoft startSurfaceprocessingApplication Material Technical features EquipmentRough sandingFine sandingMicro-sandingDry sandingMetal (stainless steel,copper and copperalloys, aluminium)Wood (natural andvarnished)Paint (boat, vehicle)Plastics (fibreglass,polyurethane)Mineral substanceInput(W)Air flow(l/min)Max. vacuum(mbar)Tank volume(l)Socket connectionmax.(W)Weight accordingto PTA(kg)Automatic start/stopSuction controlSoft start 1 300 3 300 230 24 2 000 7,0 1 500 3 600 270 40 2 000 9,0 included suitability optimal suitability187
SandersSanding and polishingfor the perfect finish.<strong>FEIN</strong> supplies a complete coordinated range of machines andaccessories for stainless steel machining. The grinding polisherWPO 14-25 E is uniquely suitable for all grinding, satin-finishingand polishing work, even in continuous use. You can also usediscs, cylinders and polishing rings without a problem. The right<strong>FEIN</strong> accessory for the job is ideally adapted for efficient use,from the first cut to the final finish. The pipe sanders RS 10-70 Eand RS 12-70 E are quick and effective tools for processingstainless steel pipes. Whether you need to sand welded seamsflat or satin-finish whole hand rails, the pipe sander is theright choice. Effortlessly achieve optimum surfaces on wood,mineral substances, paint, plastics and other materials with<strong>FEIN</strong> eccentric grinders. With their tremendous power, you canwork quickly and effectively on surfaces large and small and withthe right <strong>FEIN</strong> system accessories – backing pads, sanding sheetsand dust extractors – there is virtually no dust.188
Compact angle grindersCompact angle grinders, Ø 125 mmWSG 14-70 EPowerful compact angle grinder with variable speed for working with stainless steel.Technical dataModelWSG 14-70 EInput W 1 200Output W 750Speed, no load rpm 2 500-7 000Cable with plug m 4Weight according to EPTA kg 2,4Flange M 14Grinding disc Ø mm 125Elast. Backing pad Ø mm 125Part number 7 221 43Price includes1 wheel guard, 1 pair of flanges, 1 anti-vibration handle, 1 keyEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits <strong>FEIN</strong> high-power motor – high sanding capacityover the full working range up to 150 % load. Variable speed allows various tools to be usedfor applications ranging from satin-finishing tosanding and preserves the surfaces. Unique ergonomic design for fatigue-freeworking. Equally suited to right and left handers. Low vibration values. Reliable switching on and off. Dustproof ball bearing. H 07 industrial cable. Dustproof tacho control. Removable wheel guard with protection againsttwisting. Sealed electronic parts. Soft start. Restart protection. Carbon brushes with self cut-off function. Also availiable with Tipstart and Autostop110 V only (7 221 58).SurfaceprocessingFor accessories, see page 191189
SandersStainless steel start setWSG 14-70 E – Stainless steel starter setStainless steel starter set for preparing to finish surfaces, pipes and profiles.Technical dataModelWSG 14-70 EInput W 1 200Output W 750Speed, no load rpm 2 500-7 000Cable with plug m 4Weight according to EPTA kg 2,4Flange M 14Grinding disc Ø mm 125Elast. Backing pad Ø mm 125Part number 7 221 43 61Price includes1 <strong>FEIN</strong> compact angle grinder WSG 14-70 E in plastic tool case, 1 serrated sanding disc, medium,1 finishing disc (diameter 125 mm), 5 each of Pyramix sanding sheet, perforated, diameter115 mm (grit 280, 400, 800), 25 sanding sheets (grit 80, diameter 115 mm), 1 cooling backing pad(diameter 75 mm, M14), 1 supporting plate with velcro adhesion section (Ø 115 mm, M14)Emission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits <strong>FEIN</strong> high-power motor – high sanding capacityover the full working range up to 150 % load. Variable speed allows various tools to be usedfor applications ranging from satin-finishing tosanding and preserves the surfaces. Unique ergonomic design for fatigue-freeworking. Equally suited to right and left handers. Low vibration values. Reliable switching on and off. Dustproof ball bearing. H 07 industrial cable. Dustproof tacho control. Removable wheel guard with protection againsttwisting. Sealed electronic parts. Soft start. Restart protection. Carbon brushes with self cut-off function.For accessories, see page 191190
Genuine <strong>FEIN</strong> accessories for WSG 14-70 E, WSG 14-70 E – Stainless steel start setStainless steel accessory setsStainless steel set for grindingpipes / profilesSand fine welded seams withoutdamaging adjacent surfaces. Withsubsequent surface finish. Consistingof: 10 x medium serrated grinding discs(6 37 30 018 01 0), 1 flap wheel,grit 120 (6 37 21 052 01 0),1 finishing disc (6 37 32 005 01 0).Anti-vibration handleM 8, vibration absorbing, to reduce thevibrations during longer jobs.Part number 3 21 19 124 01 0Elastic backing padwith flange M 14, for fibre sandingsheets Ø 125 mmBrush insertfor universal dust extraction devicePart number 3 32 18 101 01 4Fleece sanding discsØ 115 mm, with Velcro attachment,for use with support plate6 38 06 172 01 0For removing minor scratches, creatingsanding pattern, reducing roughnessdepthGrain No. in packpcs Part number400 5 6 37 17 240 01 0400 25 6 37 17 240 02 0ØFor removing very minor scratches,creating sanding pattern, reducingroughness depthmmPart number125 6 38 06 087 01 3GrainNo. in packpcsPart numberPart number 6 37 21 052 02 0Stainless steel set – Preparing topolish surfaces / pipes / profilesQuickly and effectively removesscratches; optimum preparation forpolishing with matched sanding pattern;when preparing for polishing:effective material removal in little time.Consisting of: 5 Pyramix sandingsheets, grit 280 (6 37 17 239 01 0),5 Pyramix sanding sheets, grit 400(6 37 17 240 01 0), 5 sanding sheets,grit 800 (6 37 17 241 01 0),5 Pyramix sanding sheets, grit 1400(6 37 17 242 01 0), 1 cooling backingpad, Ø 75 mm (6 38 06 196 01 0),25 sanding sheets, grit 80(6 37 28 135 01 0), 1 cooling backingpad, Ø 115 mm (6 38 06 193 01 0)Backing padM 14, Ø 125 mm, with Velcroattachment, for sanding sheets withVelcro rapid attachmentPart number 6 38 06 168 01 2Inner flangePart number 6 38 01 120 00 6Threaded flangeM 14, for flexible grinding/cutting discs,fan-pattern grinding wheels and roundbrushcourse 10 6 37 32 001 01 8medium 10 6 37 32 002 01 1fine 10 6 37 32 003 01 5Cool sanding padRear-ventilated backing pad, ideal forPyramix sanding discsØmmPart number115 6 38 06 193 01 0for use when the outer edge of thesanding discs has been removed.Grain No. in packpcs Part number800 5 6 37 17 241 01 0800 25 6 37 17 241 02 0Reducing roughness depth, optimumpreconditions for subsequent polishingGrain No. in packpcs Part number1400 5 6 37 17 242 01 01400 25 6 37 17 242 02 0Flap wheeldiameter 125 mm, M 14SurfaceprocessingPart number 6 38 06 193 04 0Further accessoriesTool casePlastic, inner dimensions:470 x 275 x 116 mmPart number 6 38 02 052 00 0M 14, for elastic backing pad and fortwisted steel wire brushØmmPart number75 6 38 06 196 01 0Sanding sheetØ 115 mm, for removing very deepscratches and fine welded seamsGrainPart number120 6 37 21 052 01 0Finishing discØ 125 mm, for final finishPart number 6 38 01 154 00 7Part number 6 37 32 005 01 0Backing padwith Velcro attachment, for workingwith sanding fleece, M 14Grain No. in packpcs Part number80 25 6 37 28 135 01 080 50 6 37 28 096 01 9Abras.flap disc med.Ø 125 mm, for removing fine weldedseams without damaging adjacentsurfacesPart number 3 39 01 118 01 0Plastic boxBox insert with lockable lid for smallparts and accessories, suitable for toolbox 3 39 01 118 01 0, max. 5 items/box.ØmmPart number115 6 38 06 172 01 0Universal dust extraction deviceØ 125 mm, for fan-pattern grindingdiscs, elastic backing pads, supportplates and conical twisted steel wirebrushesPyramix sanding sheetThe Pyramix hook and loop sandingdisc features a new perforation patternwhich means it can now also be usedafter the first edge has been wornaway. Ø 115 mm.For removing deep scratchesNo. in packpcsPart number10 6 37 30 018 01 0Wheel guard coverGrainNo. in packpcsPart numberØPart number 3 39 01 119 00 0Part number 9 26 02 067 01 6280 5 6 37 17 239 01 0280 25 6 37 17 239 02 0mmPart number125 6 38 11 002 01 0191
SandersSander polisherWPO 14-25 EExtremely powerful sander/polisher for cool machining of stainless steel surfaces.Technical dataModelWPO 14-25 EInput W 1 200Output W 750Speed, no load rpm 900-2 500Cable with plug m 4Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Sanding pad Ø mm 230Part number 7 221 49Price includes1 anti-vibration handleEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Extremely powerful even at low speeds thanksto mechanical gear reduction and <strong>FEIN</strong> highpower motor. Infinitely variable speed, ideal for sanding, satinfinishing, brushing and high-gloss polishing ofstainless steel. Universal suitability as fully-functional sander,polisher and satin-finisher. Excellent handling. Spindle lock. Right or left-handed operation. Restart protection. Soft start. H 07 industrial cable. Dustproof ball bearing. Carbon brushes with self cut-off function. Comprehensive range of accessories available.For accessories, see page 194–195192
SandersStainless steel start setWPO 14-25 E – Stainless steel start setStainless steel starter set for standard applications in surface machining.Technical dataModelWPO 14-25 EInput W 1 200Output W 750Speed, no load rpm 900-2 500Cable with plug m 4Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Sanding pad Ø mm 230Part number 7 221 49 50Price includes1 <strong>FEIN</strong> angle polisher WPO 14-25 E in plastic tool case, 1 holder, rotating, safety guard,1 work arbour, 1 corrugated sanding fleece, 1 supporting plate with velcro adhesion section(Ø 115 mm, M14), 10 sanding fleeces with velcro (Ø 115 mm, fine), 1 elastic sanding roller(100 x 100 mm, grain 60), 1 lamella fleece cylinder (100 x 100 mm, grain 180), 2 keys,1 anti-vibration handleEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Extremely powerful even at low speeds thanksto mechanical gear reduction and <strong>FEIN</strong> highpower motor. Infinitely variable speed, ideal for sanding, satinfinishing, brushing and high-gloss polishing ofstainless steel. Universal suitability as fully-functional sander,polisher and satin-finisher. Excellent handling. Spindle lock. Right or left-handed operation. Restart protection. Soft start. H 07 industrial cable. Dustproof ball bearing. Carbon brushes with self cut-off function. Comprehensive range of accessories available.SurfaceprocessingFor accessories, see page 194–195193
Genuine <strong>FEIN</strong> accessories for WPO 14-25 E, WPO 14-25 E Stainless steel start setStainless steel accessory setsStandard stainless steel setfor surfacesSet for standard applications in surfacemachining: cleaning off dirt withcor rugated fleece, removing tarnishingand achieving a high-quality satin finish.Consisting of: 1 elastic sanding cylinder,grit 60 (6 37 21 006 01 2), 1 lamellafleece cylinder (6 37 21 009 01 8),1 corrugated sanding fleece(6 37 23 021 01 3), 1 fine fleece sandingdisc, pack of 10 (6 37 32 003 01 5),1 support plate (6 38 06 172 01 0),1 work arbour (6 38 03 066 02 4),1 pin-type face spanner(6 29 10 022 00 2), 1 open-endedspanner 19 x 22 (6 29 04 003 00 0)Part number 6 37 21 006 04 0Stainless steel set for grindingsurfacesEffective material removal for surfaces.Consisting of: 1 expansion cylinder(6 38 06 192 01 0), 5 sanding sleeves,grit 60 (6 37 14 132 01 0), 5 sandingsleeves, grit 80 (6 37 14 133 01 0),5 sanding sleeves, grit 120(6 37 17 134 01 0)Stainless steel set – satinfinishingprofilesSatin-finishing of profiles for a perfectsanding pattern. Consisting of:1 elastic cylinder, grit 60, medium(6 37 21 054 01 0), 1 elastic cylinder,grit 180, fine (6 37 21 055 01 0),1 sine fleece sanding cylinder, fine(6 37 21 056 01 0), 1 work arbour(6 38 03 071 02 0)Part number 6 37 21 054 02 0Stainless steel set for polishingsurfaces / pipes / profilesPolishing surfaces to a mirror polish.No lint build-up on the polishing rings.Consisting of: 1 sisal polishing ring(6 37 23 011 01 4), 2 rigid polishingring cloths (6 37 23 013 01 1),2 soft polishing ring cloths(6 37 23 014 01 9), 1 brush paste(6 37 26 027 01 0), 1 pre-polishingpaste (6 37 26 028 01 0), 1 colouringpaste (6 37 26 029 01 0), 1 workarbour (6 38 03 027 03 8), 1 pin-typeface spanner (6 29 10 022 00 2),1 open-ended spanner 19 x 22(6 29 04 003 00 0)Sine fleece sanding cylinderBore 19 mmØ 100 x 50 mm, with sine wave, forsmooth satin finishGrain ModelPart number180 fine 6 37 21 056 01 0Ø 100 x 100 mm, with sine wave,for smooth satin finishGrain ModelPart number180 fine 6 37 21 051 01 0Flap wheeldiameter 150 mm, bore 14 mmFor remedying minor mistakes andscratchesPart number 6 37 21 003 01 7For very fine satin finishGrain ModelPart number280 very fine 6 37 21 010 01 0Sanding fleecewith corrugated folds, width approx.30 mm, bore hole 14 mm, for lightfinishing work, derusting, polishing, anddecorative workØmmPart number150 6 37 23 021 01 3200 6 37 23 022 01 6Fleece sanding discsØ 115 mm, with Velcro attachment,for use with support plate6 38 06 172 01 0for medium brush applicationsGrain No. in packpcs Part numbercourse 10 6 37 32 001 01 8medium 10 6 37 32 002 01 1fine 10 6 37 32 003 01 5Part number 6 38 06 192 02 0Stainless steel set for satinfinishing surfacesPerfect smooth satin finish. Very lowbuild-up of heat during machining.Consisting of: 1 medium elastic sandingcylinder, grit 60 (6 37 21 006 01 2),1 fine elastic sanding cylinder, grit 180(6 37 21 007 01 6), 1 fine sine fleecesanding cylinder, grit 180(6 37 21 051 01 0)Part number 6 37 23 011 04 0Further accessoriesElastic sanding cylinderBore 19 mm100 x 100 mmPart number 6 37 21 004 01 5For for fine brush strokes, satin finish.Backing padwith Velcro attachment, for workingwith sanding fleece, M 14ØmmPart number115 6 38 06 172 01 0Part number 6 37 21 005 01 9Part number 6 37 21 050 02 0Standard stainless steel setfor pipesSet for standard applications in themachining of straight pipes. Cleaning offdirt, removing tarnishing and achievinga high-quality satin finish. Consisting of:1 grinding belt roller (6 38 06 181 01 6),1 grinding belt, grit 60, pack of 10(6 37 14 044 01 0), 1 grinding belt,grit 120, pack of 10 (6 37 14 045 01 4),1 medium fleece belt (6 37 14 048 01 9),1 fine fleece belt (6 37 14 049 01 3),1 adhesive strip (6 38 09 004 01 9)Grain ModelPart number60 medium 6 37 21 006 01 2180 fine 6 37 21 007 01 6100 x 50 mmLamella fleece cylinderdiameter 100 x 100 mm, bore 19 mmFor medium satin finishGrain ModelPart number100 medium 6 37 21 008 01 4For fine satin finishSanding strip rollBore 19 mm100 x 70 mmPart number 6 38 06 181 01 6Sanding strips600 x 30 mmGrain ModelPart number60 medium 6 37 21 054 01 0180 fine 6 37 21 055 01 0Part number 6 38 06 181 03 0Grain ModelPart number180 fine 6 37 21 009 01 8Grain No. in packpcs Part number60 10 6 37 14 044 01 0120 10 6 37 14 045 01 4240 10 6 37 14 046 01 7194
Genuine <strong>FEIN</strong> accessories for WPO 14-25 E, WPO 14-25 E Stainless steel start setAdhesive stripFor re-fastening grinding belts in closedpipe systems, 50 mPart number 6 38 09 004 01 9Fleece stripsWith button closure for refastening,ideal for closed pipe systems,600 x 30 mmModelPart numbercourse 6 37 14 047 01 1medium 6 37 14 048 01 9fine 6 37 14 049 01 3Polishing rings, fleece, extra softWidth approx. 15 mm, bore hole14 mm, for final polishing of nonferrousmetals, iron/steel, stainlesssteel and many plastics with finalpolishing paste “white”ØmmPart number150 6 37 23 019 01 2200 6 37 23 020 01 4Polishing wheeldiameter 150 mm, width 60 mm,elastic, bore 14 mmfor brush polishing, grain 16 (coarse),soft, “green”Brushing pasteyellow, for Sisal/cloth for matt-shiningof non-ferrous metals, iron/steel, andstainless steelPart number 6 37 26 027 01 0Preliminary polishing pasteorange, for firm cloth, for matt-shiningand polishing of non-ferrous metals,iron/steel, and stainless steelWith wheel flange M 14, for lamellasanding discs, buffing and polishingdiscs, holding range 15 – 50 mm,tool mounting diameter 14 mmPart number 6 38 03 066 02 4Safety guardas hand guardPart number 3 02 29 216 00 5Polishing rings, Sisal, clothfor – fine finishing/brushing andlevelling of non-ferrous metalsfollowing preliminary sanding withgrain 240-280 using polishing paste“yellow”. – Fine finishing/brushing andlevelling of iron/steel, and stainlesssteel following preliminary sandingwith grain 280-320 using polishingpaste “yellow” – matt-shining/brushingnon-ferrous metals, iron/steel, andstainless steel using polishing paste“yellow”. – Preliminary polishing ofiron/steel and stainless steel withpreliminary polishing paste “orange”width about 30 mm, 14 mm borePart number 6 37 13 013 01 8for delicate surfaces, grit 24 (medium),soft, “blue”Part number 6 37 13 015 01 0Part number 6 37 26 028 01 0Rumbling pastewhite, for soft cloth, for high-glosspolishing of non-ferrous metals, iron/steel, stainless steel, and chromeAnti-vibration handleM 8, vibration absorbing, to reduce thevibrations during longer jobs.Part number 3 21 19 124 01 0Expansion rollerBore 19 mmØ 100 x 100 mm, for vibration-free,secure holding of sanding sleevesfor fine polishing, grit 46, soft, “brown”Part number 6 37 13 016 01 3ØmmPart number150 6 37 23 011 01 4200 6 37 23 012 01 7also required: work arbourPart number 6 38 03 066 02 4Flap wheelWidth 50 mm, for polishing rustresistantsteel, bore 14 mmPart number 6 37 26 029 01 0Holderfor side handle, 360° rotatablePart number 6 38 06 192 01 0Sanding sleeveFor removing small welded seams andvery deep scratches and mill scaleSurfaceprocessingPolishing rings, hard clothWidth approx. 15 mm, bore hole14 mm, for preliminary polishing andpolishing of non-ferrous metals, iron/steel, stainless steel with preliminarypolishing paste “orange”ØmmPart numberGrainNo. in packpcsPart number200 6 37 21 001 00 1Part number 6 37 33 006 01 060 5 6 37 14 132 01 0ØMicrofibre clothFine weave quality for cleaning polishingresidue. Hem-free version means noscratches and no lintWheel arborFor satin-finishing tools (cylinders androllers), tool holder Ø 19 mmFor removing deep scratchesmmPart number150 6 37 23 013 01 1200 6 37 23 015 01 3GrainNo. in packPolishing rings, soft clothWidth approx. 15 mm, bore hole14 mm, for high-gloss polishing of nonferrousmetals, iron/steel, stainlesssteel and chrome with final polishingpaste “white”Part number 6 37 33 003 01 0Viennese chalkSpecial steel cleaning powder toremove polishing paste and fingerprints, 1 kgLengthmmPart number50 6 38 03 071 02 0100 6 38 03 067 02 8with clamping flange M 14, for polishingrings, clamping range 15-35 mmpcs Part number80 5 6 37 14 133 01 0For removing scratches, stage prior tosatin-finishingØmmPart number150 6 37 23 014 01 9200 6 37 23 016 01 6Part number 6 37 26 007 01 4Part number 6 38 03 027 03 8Grain No. in packpcs Part number120 5 6 37 14 134 01 0195
SandersRotary grinder setROT 14-200 EExtremely powerful rotary grinder for high material removal on metal, wood, coatings and fibreglass-reinforced plastics (FRP).Technical dataModelROT 14-200 EInput W 1 200Output W 750Speed, no load rpm 900-2 500Cable with plug m 4Weight according to EPTA kg 2,6Polishing disc Ø mm 150/200Mounting thread M 14Hose connection Ø mm 38Sanding pad Ø mm 150/200Part number 7 221 65 50Price includes1 <strong>FEIN</strong> angle polisher WPO 14-25 E in plastic tool case, 1 Extractor hood, 1 backing pad, hard,Ø 200 mm, 1 anti-vibration handleEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits 200 mm backing pad – extremely powerfulacross the entire speed range. Dust-free working with extractor hood, suitablefor 150 and 200 mm backing pad. Double gear reduction ensures constant speedseven under the highest loads. Can be combined with the vacuum cleaners fromthe <strong>FEIN</strong> Dustex range. Can be used universally as a grinder and polisher. Infinitely variable speed, ideal for protectingsensitive surfaces. Excellent handling. Spindle lock. Incl. mountable handle cover for secure gripwhen polishing. Right or left-handed operation. Restart protection. H 07 industrial cable. Dustproof ball bearing. Extremely light weight. Large tool case for consumable material andaccessories.For accessories, see page 197196
Genuine <strong>FEIN</strong> accessories for ROT 14-200 EGeneral accessoriesTool casePlastic, inner dimensions:470 x 275 x 116 mmSanding Ø 150 mmSanding sheetsperforated, Ø 150 mm, with Velcrorapid attachmentApplication: Fibre-glass reinforcedmaterials. Quality: fully synthetic-resinbonded, silicon carbide. Features: longtool life, high sanding capacity.Grain No. in packApplication: Metal, automotive paints.Quality: fully synthetic-resin bonded,medium bond, corundum. Feature:greatly reduces glazing.Grain No. in packpcs Part number80 50 6 37 28 057 01 7100 50 6 37 28 027 01 0150 50 6 37 28 081 01 8pcs Part number16 50 6 37 28 020 01 536 50 6 37 28 021 01 4Sanding padØ 200 mm, with holes, with hook andloop fastenerPart number 3 39 01 118 01 0Application: Wood, metal, car bodies,welds. Quality: fully synthetic-resinbonded, corundum. Features: highPlastic, inner dimensions:470 x 275 x 232 mmsanding capacity.Grain No. in packpcs Part number60 50 6 37 28 022 01 7ModelSanding padØ 150 mm, with holes, with hook andloop fastenerPart numberhard 6 38 06 102 02 3medium 6 38 06 095 02 1extra soft 6 38 06 118 02 3Hook and loop fastenerPart number 3 14 26 033 00 1Part number 3 39 01 122 01 0Anti-vibration handleM 8, vibration absorbing, to reduce thevibrations during longer jobs.ModelPart numberhard 6 38 06 116 02 1extra soft 6 38 06 166 02 6PolishingLambskinwith Velcro rapid attachment.Part number 3 21 19 124 01 0Hook and loop fastenerPart number 3 14 26 031 00 4Grinding Ø 200 mmØSurfaceprocessingProtect.suction hoodPart number 3 18 10 240 01 4<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.Sanding sheetsperforated, Ø 200 mm, with Velcrorapid attachmentApplication: Fibre-glass reinforcedmaterials. Quality: fully synthetic-resinbonded, silicon carbide. Features: longtool life, high sanding capacity.Grain No. in packpcs Part number16 50 6 37 28 024 01 936 50 6 37 28 025 01 3mmPart number150 6 37 23 009 00 4200 6 37 23 010 00 6Application: Metal, car bodies, solderedpoints, welds, fibreglass. Quality:high-performance emery canvas, fullysynthetic-resin bonded, corundum.Features: very stable, very highabrasion performance.GrainNo. in packpcsPart number60 50 6 37 28 082 01 1Application: Metal, car bodies, solderedpoints, welds, fibreglass. Quality: fullysynthetic-resin bonded, corundum.Features: stable, high abrasionperformance.Grain No. in packpcsPart number60 50 6 37 28 077 01 5197
SandersPipe sanderRS 10-70 E Start setHandy, compact pipe sander for stainless steel pipes with a diameter of up to Ø 45 mm.Technical dataModelRS 10-70 EInput W 800Output W 550Speed, no load rpm 2 500-7 000Belt speed m/sec 3,5-11Minimum wall clearance mm 50Weight according to EPTA kg 2,9Cable with plug m 4Pipes up to Ø mm 8-45Part number 7 221 66 60Price includes1 pipe sander RS 10-70 E in plastic tool case, 10 each of grinding belts (grit 120, 180),5 fleece belts (fine)Emission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits <strong>FEIN</strong> high-power motor for constant speed evenwhen loaded. Optimum belt speeds for effective use of variousgrinding, fleece and polishing belts. Extremely easy to use – grinding arm canbe swivelled, tool-free belt installation andadjustment. Automatic belt adjustment. Perfect belt guidance. Clasping angle of up to 180°. Infinitely variable speed, ideal for protectingsensitive surfaces. Soft start. Restart protection. H 07 industrial cable. Comprehensive range of accessories available.For accessories, see page 201198
SandersPipe sanderRS 12-70 EPipe sander with extremely high sanding capacity for stainless steel pipes and pipe bends up to 80 mm in diameter.Technical dataModelRS 12-70 EInput W 1 200Output W 750Speed, no load rpm 2 700-7 000Belt speed m/sec 22Minimum wall clearance mm 50Weight according to EPTA kg 3,8Cable with plug m 4Pipes up to Ø mm 8-80Part number 7 221 13 50Emission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Effective sanding of welded seams thanks tooptimum cutting speeds of the sanding belts. Infinitely variable speed for sanding, satinfinishingand high-gloss polishing of ready-fittedhand rails. Flexible sanding belts optimally adapt to evennarrow pipe bends, creating surfaces withoutawkward transitions. 360° peripheral sanding in just 2 steps. Optional guide pulleys for narrow distances fromthe wall. Restart protection. Wide range of accessories. Dustproof ball bearing. Carbon brushes with self cut-off function.SurfaceprocessingFor accessories, see page 201199
SandersStainless steel start setRS 12-70 E – Professional stainless steel setStainless steel starter set for standard applications in pipe machining.Technical dataModelRS 12-70 EInput W 1 200Output W 750Speed, no load rpm 2 700-7 000Belt speed m/sec 22Minimum wall clearance mm 50Weight according to EPTA kg 3,8Cable with plug m 4Pipes up to Ø mm 8-80Part number 7 221 13 51Price includes2 x 10 pcs. polishing belts, 20 x 815 mm P120/P180, 2 x 10 pcs. polishing belts, 40 x 815 mmP120/P180, 5 fleece belts 20 x 820 mm very fine, 1 plastic carrying caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Effective sanding of welded seams thanks tooptimum cutting speeds of the sanding belts. Infinitely variable speed for sanding, satinfinishingand high-gloss polishing of ready-fittedhand rails. Flexible sanding belts optimally adapt to evennarrow pipe bends, creating surfaces withoutawkward transitions. 360° peripheral sanding in just 2 steps. Optional guide pulleys for narrow distances fromthe wall. Restart protection. Wide range of accessories. Dustproof ball bearing. Carbon brushes with self cut-off function.For accessories, see page 201200
Genuine <strong>FEIN</strong> accessories for RS 10-70 E Start-Set, RS 12-70 E,RS 12-70 E – Professional stainless steel setGeneral accessoriesRS 12-70 E40 x 815 mmRS 10-70 EPre-polishing cream, redfor pre-polishingPart number 6 37 26 008 01 2Basic pipe sander setCleaning off dirt, removing scratchesand achieving a perfect satin finish.Consisting of: 2 x 10 grinding belts,20 x 815 mm, P 120/P180;2 x 10 grinding belts, 40 x 815 mm,P120/P180; 5 fleece belts,20 x 820 mm, very fine 280Grain No. in packpcs Part number120 10 6 37 14 054 01 9180 10 6 37 14 055 01 3Sanding stripsHighly flexible sanding belts, ideal forsanding pipe bendsNo. in pack 10, 30 x 533 mm.Colouring paste, whitefor buffing and high-gloss polishingPart number 6 37 14 050 02 1Fleece stripsVery soft version for smooth surfaces,even with tight pipe bends20 x 815 mmGrainPart number80 6 37 14 136 01 0120 6 37 14 137 01 0180 6 37 14 138 01 0320 6 37 14 139 01 0400 6 37 14 140 01 0Part number 6 37 26 009 01 6Viennese chalkSpecial steel cleaning powder toremove polishing paste and fingerprints, 1 kgPipe sander polishing setFrom preparing to polish to achievinga perfect mirror polish. Consisting of:2 x 10 grinding belts, 20 x 815 mm,P320/P400; 1 x 3 polishing belts,20 x 815 mm; 1 tube pre-polishingcream, red (200 ml); 1 tube colouringpaste, white (200 ml)Grain No. in packpcs Part number80 5 6 37 14 056 01 6120 5 6 37 14 057 01 0280 5 6 37 14 058 01 8Fleece stripsVery soft version for smooth surfaces,even with tight pipe bendsNo. in pack 5, 30 x 533 mm.Polishing belts20 x 815 mm, very soft version, forsmooth mirror polish even with tightpipe bendsPart number 6 37 26 007 01 4Microfibre clothFine weave quality for cleaningpolishing residue. Hem-free versionmeans no scratches and no lintPart number 6 37 14 052 02 3Ceramic sanding beltsMaximum material removal and verylong service life. Also suitable forremoving fine welded seamsPart number 6 37 26 010 01 8Rotating rollerFor narrow spaces(distance from wall 50 mm)GrainPart numbercourse 6 37 14 141 01 0medium 6 37 14 142 01 0fine 6 37 14 143 01 0Polishing beltsVery soft version for smooth mirrorpolish, even with tight pipe bends.No. in pack 3, 30 x 533 mm.SurfaceprocessingPart number 6 37 33 003 01 0Part number 6 37 14 144 01 0Dimensions No. in packPart number 3 13 35 017 01 1mm pcs Part number20 x 815 10 6 37 14 130 01 040 x 815 10 6 37 14 131 01 0Sanding stripsHighly flexible sanding belts, ideal forsanding pipe bends20 x 815 mmGrainNo. in packpcsPart number120 10 6 37 14 050 01 5180 10 6 37 14 051 01 4320 10 6 37 14 052 01 7400 10 6 37 14 053 01 1201
Belt fileBelt fileBF 10-280 EExtremely powerful belt file for corners and edges in stainless steel machining.Technical dataModelBF 10-280 EInput W 800Output W 550Speed, no load rpm 10 000-28 000Belt speed m/sec 12-32Cable with plug m 4Weight according to EPTA kg 2,1Belt size mm 520 x 3/6/20Part number 7 228 05 50Price includes1 stepped grinding armEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits <strong>FEIN</strong> high-power motor for highly effectivematerial removal and constant speed even athigh loads. Optimum belt speeds for effective use of variousgrinding, fleece and polishing belts. Extremely easy to handle – tool-free, grindingarm can be swivelled 180°, tool-free beltinstallation and adjustment. Perfect belt guidance. Belt widths of between 3 and 20 mm. Infinitely variable speed, ideal for protectingsensitive surfaces. Stepped and straight grinding arms for a varietyof applications. Soft start. Restart protection. H 07 industrial cable. Comprehensive range of accessories available.For accessories, see page 204202
Belt fileBelt fileBF 10-280 E Start-SetStart set belt file for corners and edges in stainless steel machining.Technical dataModelBF 10-280 EInput W 800Output W 550Speed, no load rpm 10 000-28 000Belt speed m/sec 12-32Cable with plug m 4Weight according to EPTA kg 2,1Belt size mm 520 x 3/6/20Part number 7 228 05 51Price includes1 belt file BF 10-280 E in plastic tool case, 3 grinding arms (1 each of 3/6 mm stepped,6 mm straight, 20 mm straight), 10 grinding belts, 3 mm (grit 120), 10 grinding belts,6 mm (grit 120), 10 grinding belts, 20 mm (grit 120), 5 fleece belts, 6 mm (medium)Emission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits <strong>FEIN</strong> high-power motor for highly effectivematerial removal and constant speed even at highloads. Extremely easy to handle – tool-free, grindingarm can be swivelled 180°, tool-free beltinstallation and adjustment. Start set with stepped and straight grinding armsfor a variety of applications, ceramic grindingbelts for effective machining of welded seamsand fleece belts for finishing work in variouswidths. Optimum belt speeds. Perfect belt guidance. Belt widths of between 3 and 20 mm. Infinitely variable speed, ideal for protectingsensitive surfaces. Soft start. Restart protection. H 07 industrial cable. Comprehensive range of accessories available.SurfaceprocessingFor accessories, see page 204203
Genuine <strong>FEIN</strong> accessories for BF 10-280 E, BF 10-280 E Start-SetGeneral accessoriesStepped grinding armPre-polishing cream, redfor pre-polishingBelt widthmmPart number3/6 6 38 10 026 01 0Straight grinding armPart number 6 37 26 008 01 2Colouring paste, whitefor buffing and high-gloss polishingBelt widthmmPart number6 6 38 10 027 01 020 6 38 10 030 01 0Ceramic grinding beltMaximum material removal and verylong service life. Also suitable forremoving fine welded seamsPack of 10, 520 mm long.Part number 6 37 26 009 01 6Viennese chalkSpecial steel cleaning powder toremove polishing paste and fingerprints, 1 kgWidth GrainmmPart number3 80 6 37 14 061 01 03 120 6 37 14 062 01 03 180 6 37 14 063 01 06 80 6 37 14 068 01 06 120 6 37 14 069 01 06 180 6 37 14 070 01 020 80 6 37 14 089 01 020 120 6 37 14 090 01 020 180 6 37 14 091 01 0Part number 6 37 26 007 01 4Microfibre clothFine weave quality for cleaningpolishing residue. Hem-free versionmeans no scratches and no lintFleece beltSoft version for smooth surfaces.Pack of 5, 520 mm long.Width ModelmmPart number6 course 6 37 14 114 01 06 medium 6 37 14 115 01 06 fine 6 37 14 116 01 020 course 6 37 14 123 01 020 medium 6 37 14 124 01 020 fine 6 37 14 125 01 0Part number 6 37 33 003 01 0Polishing beltSoft version, for a smooth mirrorpolish in conjunction with<strong>FEIN</strong> polishing pastes.Pack of 3, 520 mm long.WidthmmPart number6 6 37 26 016 01 020 6 37 26 019 01 0204
Fillet weld grinderFillet weld grinderKS 10-38 E setFillet weld sander for difficult-to-reach spots in metal constructions.Technical dataModelKS 10-38 EInput W 800Speed, no load rpm 1 350-3 750Peripheral speed m/sec 29,5Weight according to EPTA kg 3,2Tool diameter mm 150Part number 7 221 67 60<strong>FEIN</strong> benefits Flexible use thanks to drive head that can beswivelled without the need for tools. Flat design for corners, angles and difficult-toreachspots. Long belt drive service life thanks to zeromaintenance tensioning system.Price includes1 fillet weld sander KS 10-38 E in plastic case, 1 anti-vibration handle, Medium fleece discs,diameter 150 mm, one 3 mm thick and one 6 mm thick, Fine fleece discs, diameter 150 mm,one 3 mm thick and one 6 mm thick, Profiling stone for profiling the fleece discsEmission values (sound/vibration) can be found at www.fein.com/vibration Spindle brake for quick tool changes. Spark hood can be adjusted and removedwithout the need for tools. Electronic speed setting. Made in Germany quality. H 07 industrial cable. Soft start. Restart protection.SurfaceprocessingFor accessories, see page 206205
Genuine <strong>FEIN</strong> accessories for KS 10-38 E – SetGeneral accessoriesFleece discWith a high sanding capacity forsanding, descaling and satin-finishingfillet welds.Profiling stoneFor sanding the fleece discs for evenfillet weld profiles.Part number 6 37 19 011 01 0Model Ø Thicknessmm mm Part numbercourse 150 3 6 37 34 001 01 0course 150 6 6 37 34 002 01 0Pre-polishing cream, redfor pre-polishingFor sanding, levelling, descaling and finesatin-finishing of fillet welds. Removesscratches on profiles and surfaces withease.Part number 6 37 26 008 01 2Colouring paste, whitefor buffing and high-gloss polishingModel Ø Thicknessmm mm Part numbermedium 150 3 6 37 34 003 01 0medium 150 6 6 37 34 004 01 0Removes tarnishing and minorscratches, ideal for preparing to polishfillet welds.Part number 6 37 26 009 01 6Viennese chalkSpecial steel cleaning powder toremove polishing paste and fingerprints, 1 kgModel Ø Thicknessmm mm Part numberfine 150 3 6 37 34 005 01 0fine 150 6 6 37 34 006 01 0For pre-polishing surfaces of filletwelds. Quickly removes tarnishingwithout wearing away the weldedseam.Part number 6 37 26 007 01 4Microfibre clothFine weave quality for cleaningpolishing residue. Hem-free versionmeans no scratches and no lintModel Ø Thicknessmm mm Part numbervery fine 150 3 6 37 34 007 01 0Felt discFor polishing fillet welds to a mirrorpolish in conjunction with<strong>FEIN</strong> polishing paste.Part number 6 37 33 003 01 0Anti-vibration handleM 8, vibration absorbing, to reduce thevibrations during longer jobs.Ø Thicknessmm mm Part number150 6 6 37 18 011 01 0Part number 3 21 19 124 01 0206
SandersEccentric SanderMSf 636-1Extremely powerful eccentric sander with optimum dust extraction for all surfaces.Technical dataModel MSf 636-1Input W 380Speed, no load rpm 8 800Stroke mm 8,4Hose connection Ø mm 32Connector thread backing pad5/16 -24 UNFCable with plug m 5Weight according to EPTA kg 2,4Sanding pad Ø mm 150Polishing disc Ø mm 150Mounting thread5/16 inPart number 7 220 78Price includes1 eccentric head Ø 150 mm, 1 backing pad, medium, Ø 150 mm, 1 suction wheel guard,1 set of keysEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Extra strong eccentric stroke means excellentsanding capacity for surfaces large or small. Hole pattern on sanding sheets, backing pad andpad edge makes for perfect dust extraction. Optimum finishing results for high-quality paints,fibreglass, wood, mineral substances(e.g. corian), plastic and metal. Slimline motor for good handling. Durable metal gear head. Sanding sheets with hook and loop fastening. Carbon brushes with self cut-off function. Wide range of accessories.For accessories, see page 208Surfaceprocessing207
Genuine <strong>FEIN</strong> accessories for MSf 636-1Sanding Ø 115 mmSanding padØ 115 mm, without holes, with hookand loop fastener, hardPart number 6 38 06 167 02 0Eccentric headØ 150 mmPolishingLambskinwith Velcro rapid attachment.Eccentric headØ 115 mmPart number 3 12 07 131 02 9Sanding Ø 125 mmSanding padØ 125 mm, perforated, with hook andloop fasteningPart number 3 12 07 103 01 3Sanding sheetsperforated, Ø 150 mm, with Velcrorapid attachmentApplication: Metal, car bodies, solderedpoints, welds, fibreglass. Quality:high-performance emery canvas, fullysynthetic-resin bonded, corundum.Features: highly stable, high sandingcapacity.Grain No. in packpcs Part number40 50 6 37 28 009 01 460 50 6 37 28 010 01 680 50 6 37 28 056 01 3100 50 6 37 28 054 01 6ØmmPart number125 6 37 23 008 00 0150 6 37 23 009 00 4General accessories<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.ModelPart numberhard 6 38 06 103 02 7medium 6 38 06 088 02 7Sanding sheetsperforated, Ø 125 mm, with Velcrorapid attachmentApplication: wood, paints, filler,automotive paints, fibreglass, plastics.Quality: fully synthetic-resin bonded,medium bond, corundum. Feature:greatly reduces glazing, high sandingcapacity, flexible.Grain No. in packpcs Part number80 50 6 37 28 001 01 6100 50 6 37 28 002 01 9Sanding Ø 150 mmSanding padØ 150 mm, with holes, with hook andloop fastenerModelPart numberhard 6 38 06 101 02 0medium 6 38 06 090 02 3soft 6 38 06 114 02 4Application: wood, paint, automotivepaints, filler, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: greatly reducesglazing, flexible.Grain No. in packpcs Part number80 50 6 37 28 074 01 4100 50 6 37 28 011 01 5120 50 6 37 28 084 01 3150 50 6 37 28 012 01 8180 50 6 37 28 013 01 2220 50 6 37 28 014 01 0240 50 6 37 28 015 01 4280 50 6 37 28 016 01 7320 50 6 37 28 017 01 1400 50 6 37 28 061 01 0Application: Wood, metal, car bodies,welds. Quality: fully synthetic-resinbonded, light bond, corundum.Features: high sanding capacity.Grain No. in packpcs Part number40 50 6 37 28 072 01 260 50 6 37 28 073 01 6Tool caseTool casePlastic, inner dimensions:470 x 275 x 116 mmPart number 3 39 01 118 01 0Plastic, inner dimensions:470 x 275 x 232 mmPart number 3 39 01 122 01 0208
SandersPneumatic Random Orbit SanderM 10000-5 Compact pneumatic eccentric sander for industry and manual trades up to Ø 125 mm.M 10000-6 Compact pneumatic eccentric sander for industry and manual trades up to Ø 150 mm.Technical dataModel M 10000-5 M 10000-6Operating pressure bar 6 6Air consumption m 3 /min 0,51 0,51Speed, no load rpm 10 000 10 000Stroke mm 5,0 5,0Hose connection Ø mm 32 32Connector thread backing pad 5/16 - 24 UNF 5/16 - 24 UNFHose size Ø mm 6,0 6Weight according to EPTA kg 1,2 1,2Sanding pad Ø mm 125 150Polishing disc Ø mm 125 150Mounting thread 5/16 in 5/16 inPart number 7 520 15 7 520 16<strong>FEIN</strong> benefits Small, lightweight pneumatic eccentric sander. Good sanding capacity for surfaces large or small. Hole pattern on sanding sheets, backing pad andpad edge makes for perfect dust extraction. Quiet-running rotating piston air engine. Sanding sheets with hook and loop fastening. Wide range of accessories.For accessories, see page 210SurfaceprocessingPrice includes1 suction wheel guard, 1 air hose, 1 key, M 10000-5, 1 sanding pad Ø 125 mm,1x M 10 000-5 or a 1x M 10 000-6 machine, 1 sanding pad Ø 150 mmEmission values (sound/vibration) can be found at www.fein.com/vibration209
Genuine <strong>FEIN</strong> accessories for M 10 000-5, M 10 000-6General accessories<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.Sanding Ø 125 mmSanding padØ 125 mm, perforated, with hook andloop fasteningModelPart numberhard 6 38 06 103 02 7medium 6 38 06 088 02 7soft 6 38 06 117 02 5Sanding Ø 150 mmSanding padØ 150 mm, with holes, with hook andloop fastenerModelPart numberhard 6 38 06 101 02 0medium 6 38 06 090 02 3soft 6 38 06 114 02 4Application: Wood, metal, car bodies,welds. Quality: fully synthetic-resinbonded, light bond, corundum.Features: high sanding capacity.Grain No. in packpcs Part number40 50 6 37 28 072 01 260 50 6 37 28 073 01 6Hook and loop fastenerPart number 3 14 26 028 00 9Hook and loop fastenerPart number 3 14 26 030 00 5Sanding padØ 125 mm for MSf 636-1, withoutholes, softwith hook and loop fastener, hardPart number 6 38 06 155 03 0matching spare Velcro attachment3 14 26 027 001.Sanding sheetsperforated, Ø 150 mm, with Velcrorapid attachmentApplication: Metal, car bodies, solderedpoints, welds, fibreglass. Quality:high-performance emery canvas, fullysynthetic-resin bonded, corundum.Features: highly stable, high sandingcapacity.Sanding sheetsperforated, Ø 125 mm, with Velcrorapid attachmentApplication: Metal, car bodies, solderedpoints, welds, fibreglass. Quality:high-performance emery canvas, fullysynthetic-resin bonded, corundum.Features: highly stable, high sandingcapacity.Grain No. in packpcs Part number60 50 6 37 28 055 01 0Grain No. in packpcs Part number40 50 6 37 28 009 01 460 50 6 37 28 010 01 680 50 6 37 28 056 01 3100 50 6 37 28 054 01 6Application: wood, paint, automotivepaints, filler, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: greatly reducesglazing, flexible.Application: wood, paints, filler,automotive paints, fibreglass, plastics.Quality: fully synthetic-resin bonded,medium bond, corundum. Feature:greatly reduces glazing, high sandingcapacity, flexible.Grain No. in packpcs Part number80 50 6 37 28 001 01 6100 50 6 37 28 002 01 9150 50 6 37 28 003 01 3180 50 6 37 28 004 01 1220 50 6 37 28 005 01 5240 50 6 37 28 006 01 8280 50 6 37 28 007 01 2320 50 6 37 28 008 01 0400 50 6 37 28 058 01 5Grain No. in packpcs Part number80 50 6 37 28 074 01 4100 50 6 37 28 011 01 5120 50 6 37 28 084 01 3150 50 6 37 28 012 01 8180 50 6 37 28 013 01 2220 50 6 37 28 014 01 0240 50 6 37 28 015 01 4280 50 6 37 28 016 01 7320 50 6 37 28 017 01 1400 50 6 37 28 061 01 0Application: wood, paint, filler,automotive paints, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: highly flexible.Application: wood, paint, filler,automotive paints, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: highly flexible.Grain No. in packpcs Part number80 50 6 37 27 107 01 4180 50 6 37 27 110 01 8220 50 6 37 27 111 01 7240 50 6 37 27 112 01 0280 50 6 37 27 113 01 4320 50 6 37 27 114 01 2Grain No. in packpcs Part number150 50 6 37 27 118 01 1180 50 6 37 27 119 01 5220 50 6 37 27 120 01 7240 50 6 37 27 121 01 6280 50 6 37 27 122 01 9320 50 6 37 27 123 01 3210
PolishersFor results that sparkle –<strong>FEIN</strong> angle polishers.When it comes to treating painted surfaces on vehicles andboats, <strong>FEIN</strong> has polished solutions even for continuous useunder high loads: the <strong>FEIN</strong> angle polishers WPO 14-15 E andWPO 14-15 XE. Both are equipped with the powerful <strong>FEIN</strong>high-performance motor and two-stage gear reduction forextremely high torque. The tool always operates in the optimumspeed range, which remains constant even under load, forefficient working and brilliant results. The low weight andminimal development of heat, combined with the ergonomicdesign, make this tool a pleasure to work with even incontinuous use. What’s more, <strong>FEIN</strong> supplies everything youneed – the right high-quality accessories for every application.Surfaceprocessing211
PolishersPolishersWPO 14-15 EExtremely powerful angle polisher for vehicle and boat repairs.Technical dataModelWPO 14-15 EInput W 1 200Output W 750Speed, no load rpm 500-1 500Cable with plug m 4,0Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Part number 7 221 48 51Price includes1 anti-vibration handle, 1 Grip hood, 1 Support plate with Velcro attachment, Ø 150 mm,1 Polishing sponge, Ø 150 mm, mediumEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal speed range with infinitely variable speedcontrol for professional surface processing onvehicles and boats. Maximum speed stability at any load over the fullsetting range thanks to mechanical gear reductionin conjunction with the <strong>FEIN</strong> high-power motor. Special system accessories for the efficientrefurbishment of used car paintwork, new carpaintwork and highly scratch-resistant paints, andfor cleaning, sanding and polishing boat surfacesand gelcoat layers. Convenient speed adjustment. Does not heat up in continuous use. Handle cover for excellent ergonomics. Spindle lock. Right or left-handed operation. Restart protection. Soft start. Carbon brushes with self cut-off function. Can be converted to rotary sander withextractor hood and backing pad. Tool also available without accessories(7 221 48).For accessories, see page 217–218212
PolishersPolishersWPO 14-15 XEExtremely powerful angle polisher for vehicle repairs.Technical dataModelWPO 14-15 XEInput W 1 200Output W 750Speed, no load rpm 200-1 500Cable with plug m 4,0Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Part number 7 221 50 51Price includes1 anti-vibration handle, 1 Grip hood, 1 Support plate with Velcro attachment, Ø 150 mm,1 Polishing sponge, Ø 150 mm, mediumEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal speed range with infinitely variable speedcontrol for professional surface machining onvehicles and sensitive surfaces. Maximum speed stability at any load over the fullsetting range thanks to mechanical gear reductionin conjunction with the <strong>FEIN</strong> high-power motor. Special system accessories for the efficientrefurbishment of used car paintwork, new carpaintwork and highly scratch-resistant paints,and for cleaning, sanding and polishing paintedsurfaces. Convenient speed adjustment. Does not heat up in continuous use. Handle cover for excellent ergonomics. Spindle lock. Right or left-handed operation. Restart protection. Soft start. Carbon brushes with self cut-off function. Tool also available without accessories(7 221 50).SurfaceprocessingFor accessories, see page 217–218213
PolishersMarine PowerPolisherBoat polisherWPO 14-15 E marine polishing setPolishing set for boat repairs.Technical dataModelWPO 14-15 EInput W 1 200Output W 750Speed, no load rpm 500-1 500Cable with plug m 4Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Part number 7 221 48 60Price includes1 <strong>FEIN</strong> PowerPolisher WPO 14-15 E with handle cover and also with side anti-vibration handlein sturdy plastic case, 1 support plate with hook and loop fastening, Ø 170 mm, 1 polishing pad,Ø 195 mmEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal speed range with infinitely variable speedcontrol for professional surface machining onboats. Maximum speed stability at any load over the fullsetting range thanks to mechanical gear reductionin conjunction with the <strong>FEIN</strong> high-power motor. Special system accessories for the efficientrefurbishment of used car paintwork, new carpaintwork and highly scratch-resistant paints, andfor cleaning, sanding and polishing boat surfacesand gelcoat layers. Convenient speed adjustment. Does not heat up in continuous use. Handle cover for excellent ergonomics. Spindle lock. Right or left-handed operation. Restart protection. Soft start. Carbon brushes with self cut-off function. Can be converted to rotary sander withextractor hood and backing pad. Wide range of accessories. Tool also available without accessories(7 221 48).For accessories,see page 217–218214
PolishersPolishersWPO 10-25 EPowerful easy-to-use angle polisher for refurbishing paintwork.Technical dataModelWPO 10-25 EInput W 800Output W 550Speed, no load rpm 900-2 500Cable with plug m 4Weight according to EPTA kg 2,2Polishing disc Ø mm 150Mounting thread M 14Part number 7 221 63 51<strong>FEIN</strong> benefits Ideal speed range with infinitely variable speedcontrol for professional surface machining onvehicles. Maximum speed stability at any load over the fullsetting range thanks to mechanical gear reductionin conjunction with the <strong>FEIN</strong> high-power motor. Special system accessories for effectiverefurbishing of new and used cars and highlyscratch-resistant paintwork.Price includes1 anti-vibration handle, 1 Grip hood, 1 Support plate with Velcro attachment, Ø 150 mm,1 Polishing sponge, Ø 150 mm, mediumEmission values (sound/vibration) can be found at www.fein.com/vibration Convenient speed adjustment. Does not heat up in continuous use. Handle cover for excellent ergonomics. Spindle lock. Right or left-handed operation. Restart protection. Soft start. Carbon brushes with self cut-off function. Tool also available without accessories(7 221 63).SurfaceprocessingFor accessories, see page 217–218215
PolishersPolishersWPO 14-25 EExtremely powerful angle polisher for refurbishing paintwork.Technical dataModelWPO 14-25 EInput W 1 200Output W 750Speed, no load rpm 900-2 500Cable with plug m 4Weight according to EPTA kg 2,5Polishing disc Ø mm 230Mounting thread M 14Part number 7 221 49 51Price includes1 anti-vibration handle, 1 Grip hood, 1 Support plate with Velcro attachment, Ø 150 mm,1 Polishing sponge, Ø 150 mm, mediumEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal speed range with infinitely variable speedcontrol for professional surface processing onvehicles and boats. Maximum speed stability at any load over the fullsetting range thanks to mechanical gear reductionin conjunction with the <strong>FEIN</strong> high-power motor. Special system accessories for the efficientrefurbishment of used car paintwork, new carpaintwork and highly scratch-resistant paints, andfor cleaning, sanding and polishing boat surfacesand gelcoat layers. Excellent handling. Spindle lock. Right or left-handed operation. Restart protection. Soft start. H 07 industrial cable. Dustproof ball bearing. Carbon brushes with self cut-off function. Comprehensive range of accessories available. Tool also available without accessories(7 221 49).For accessories,see page 217–218216
Genuine <strong>FEIN</strong> accessories for WPO 14-15 E – Set, WPO 14-15 XE – Set,WPO 14-15 E marine polishing set, WPO 10-25 E – Set, WPO 14-25 ELacquer setPaint refurbishing and finishing setIdeal range of accessories for refurbishingweathered and new paintwork.Also perfectly suited to finishing freshpaintwork (not suitable for matt paintwork). Plastic case contains: 1 <strong>FEIN</strong>single-stage polish, 1 kg; 1 <strong>FEIN</strong> topwax paint seal, 1 kg; 1 support plate,150 mm; 1 lambskin, 150 mm;2 medium hard orange polishing sponges,150 mm; 1 waffle pad; 53 mini sandingdiscs, grit 2800; 1 manual sanding block;1 moistening cube; 1 cleaning putty,200 g; 2 microfibre cloths.Part number 6 37 23 028 04 0GrindingSanding discMicro-fine self-adhesive sandpaper,2800 grain, for treating lacquer faultssuch as lacquer inclusions. 1 sheet of53 sanding discs, Ø 30 mm. Fits onhand sanding block 6 37 33 002 01 0Part number 6 37 17 221 01 0Nylon barrel brushØ 125 mm, grain 46, M 14, forbrushing after removal by caustics,cleaning roof beams, restorationof antique furniture, roughing paintfor new coats, deburring, and lightderusting of metal partsPart number 6 37 22 048 01 4Polishing<strong>FEIN</strong> single-stage polishIdeal for slightly to severely damagedscratch-resistant paintwork. Excellentshine results in just one step. Siliconefree.ContentsgPart number1 000 6 37 26 014 01 0Backing padwith Velcro attachment, M 14Polishing spongeFor polishing painted surfaces. Varioushardness grades: soft for new paintwork, medium for slightly weatheredpaintwork and applying wax, hard forseverely weathered paintwork. Quickhook and loop fastening, height 40 mm.Ø ModelmmPart number100 soft 6 37 23 024 01 8100 hard 6 37 23 023 01 0125 medium 6 37 23 017 01 0150 medium 6 37 23 018 01 8160 soft 6 37 23 026 01 5160 hard 6 37 23 025 01 2Infotextmatching support plate: forØ 100 mm – support plate Ø 80 mm,for Ø 125 mm – support plateØ 125 mm, for Ø 150 mm – supportplate Ø 150 mm, for Ø 160 mm –Ø 130 mmPolishing sponge orange 150 mmPolishing sponge with fine pores,medium hard for new and old lacquersØ 150 mmPart number 6 37 23 028 01 0SealingWax sealingSprayable lacquer varnish for cleaningand permanently sealing polishedsurfaces. Removes polishing agentresidues from plastic parts.ContentsmlPart number500 6 37 26 025 01 0<strong>FEIN</strong> top wax paint sealLong-lasting paint seals thanks to highquality natural and synthetic waxes.For a sensational shine. Silicone-free.ContentsgPart number1 000 6 37 26 015 01 0Spray waxSprayable lacquer varnish for cleaningand permanently sealing polishedsurfaces. Removes polishing agentresidues from plastic parts.SurfaceprocessingHumidification spongeEasy-to-use foam cube for hygienicmoisturizing the sanding discs.ØmmPart number80 6 38 06 179 01 5125 6 38 06 169 01 6130 6 38 06 178 01 1150 6 38 06 170 01 8200 6 38 06 171 01 7Waffled spongeExtremely fine and soft polishingsponge for removing holograms ondark lacquers. Ø 150 mmContentsmlPart number100 6 37 26 013 01 0Part number 6 37 33 001 01 0Sanding blockEasy-to-use sanding block for holdingself-adhesive sanding discs on bothsides.for lamb’s fleece with tensioning cord,rubber coated, M 14Part number 6 37 23 029 01 0Lambskinwith tensioning cordCleaningMicrofibre clothFine weave quality for cleaningpolishing residue. Hem-free versionmeans no scratches and no lintØPart number 6 37 33 002 01 0mmPart number120 6 38 06 012 00 8170 6 38 06 030 00 4for self-adhesive sanding sheetsØmmPart numberØmmPart number120 6 37 23 007 00 2170 6 37 23 003 00 3with Velcro rapid attachment.Part number 6 37 33 003 01 0Cleaning brushFor cleaning and brushing out thelambskin and the polishing sponges80 6 38 06 180 01 7ØmmPart numberPart number 6 37 33 004 01 0125 6 37 23 008 00 0150 6 37 23 009 00 4200 6 37 23 010 00 6217
Genuine <strong>FEIN</strong> accessories for WPO 14-15 E – Set, WPO 14-15 XE – Set,WPO 14-15 E marine polishing set, WPO 10-25 E – Set, WPO 14-25 EGeneral accessoriesTool and paintwork maintenancesetPremium microfibre cloth with 100 mlspray wax to clean and maintain tools,plastics and painted surfaces.Polishing spongeØ 195 mm for backing pads with a Øof 170 mm, 6 38 06 187 01 0, M14with hook and loop fastening system.Recommended working speed500-1000 rpm.Application: wood, paint, automotivepaints, filler, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: greatly reducesglazing, flexible.All-purpose yacht cleanerCleans boat hulls and decks, can alsobe used for aluminium, glass, plasticand textiles.Part number 6 37 26 026 01 0Cleaning putty<strong>FEIN</strong> cleaning putty gently removesdeposits from paintwork and glasssuch as paint overspray, surface rust,tar, tree gums, insects, environmentaldeposits and brake dust from rims.ØmmPart number195 6 37 23 034 01 0Bristle fleeceBristle fleece for cleaning or polishingboat hulls and decks, with a Ø of195 mm for backing pads with a Øof 170 mm, 6 38 06 187 01 0, M14with hook and loop fastening system.For fibreglass anti-slip structures.Recommended working speed:approx. 500 rpm.Grain No. in packpcs Part number80 50 6 37 28 074 01 4120 50 6 37 28 084 01 3150 50 6 37 28 012 01 8180 50 6 37 28 013 01 2240 50 6 37 28 015 01 4320 50 6 37 28 017 01 1Application: wood, paint, filler,automotive paints, fibreglass, plastics.Quality: fully synthetic-resin bonded,corundum. Feature: highly flexible.ContentsmlPart number500 6 37 26 021 01 0Anti-yellowing sprayEffortlessly removes yellow stains andalgae from the waterline, as well asrust stains, easy and straightforward toapply, will not damage plastic and onlya small amount required.ContentsgPart number200 6 37 33 007 01 0Microfibre clothFine weave quality for cleaningpolishing residue. Hem-free versionmeans no scratches and no lintØmmPart number195 6 37 23 033 01 0Lamb’s wool, dome shapeDiameter approx. 235 mm forbacking pads with a Ø of 170 mm,6 38 06 187 01 0, M 14 with hook andloop fastening system. Recommendedworking speed 500-1200 rpm. QualityTOPWOOL, fleece polishing wheel.Lamb’s wool/synthetic blend, washable.Grain No. in packpcs Part number600 50 6 37 28 132 01 0800 50 6 37 28 133 01 01200 50 6 37 28 134 01 0Set of sanding sheetsIncludes 10 each of grit 60, 80, 120,180, 240.ContentsmlPart number500 6 37 26 022 01 0Carnauba wax + cleanerHigh-gloss seal with long-lasting effect:antistatic, impact-resistant, shampooresistant. Protects your yacht like asecond skin.Part number 6 37 33 003 01 0Tool caseMetal, 445 x 310 x 245 mm, 3.8 kgPart number 3 39 01 098 01 8Plastic, inner dimensions:470 x 275 x 232 mmØmmPart number230 6 37 23 035 01 0Sanding padWith hook and loop fastening, Ø 150 mmwith M14 suction hole. Hole circlesuitable for <strong>FEIN</strong> and other sandingmaterials.No. in packpcsPart number50 6 37 28 074 02 0Sanding fleece for antifoulSanding fleece for light sanding andsanding down of coats of antifoulproduct. Produces a stunning sandingpattern without choking the sandingfleece. Very long service life.ContentsmlPart number500 6 37 26 023 01 0Nano wax + cleanerHard-wearing long-term seal: antistatic,impact-resistant, shampoo-resistant.Very fine due to nanoparticles, fills inscratches, protects from the weatherand UV rays.Part number 3 39 01 122 01 0Marine accessoriesBacking padwith Velcro attachment, M 14ØmmPart numberØmmPart number150 6 38 06 188 01 0Sanding sheetsperforated, Ø 150 mm, with Velcrorapid attachmentApplication: Metal, car bodies, solder edpoints, welds, fibreglass. Quality: highperformanceemery canvas, fullysynthetic-resin bonded, corundum.Features: highly stable, high sandingcapacity.Ø No. in packmm pcs Part number150 5 6 37 32 004 01 0Yacht polishEasy to use, achieves brilliant shine:For fibreglass/gelcoat and paintedyachts – optimum results even withdark colours.ContentsmlPart number500 6 37 26 024 01 0Protect.suction hood170 6 38 06 187 01 0Part number 3 18 10 264 01 0GrainNo. in packContentspcs Part number60 50 6 37 28 010 01 6mlPart number500 6 37 26 020 01 0218
Vacuum cleanersA clean finish:<strong>FEIN</strong> Dustex.Dust extractors from the <strong>FEIN</strong> Dustex range are the idealsolution for minimising dust when working with power tools inindustrial settings, in the workshop, or for assembly jobs. Theconvenient automatic on/off function switches these professionaland exceptionally quiet wet/dry dust extractors on and off viathe switch on the connected power tool. <strong>FEIN</strong> Dustex dustextractors also feature a soft start function which reduces thestart-up current to avoid unnecessarily tripping lower ratedfuses. The dust extractors are supplied with an extra-long powercable and a suction hose, giving the user maximum range andflexibility.Surfaceprocessing219
Vacuum cleanersDustexVacuum cleanersDustex 25 Compact wet and dry dust extractor for connecting power tools when working in the workshop and for assembly work.Dustex 40 Powerful wet and dry dust extractor for connecting power tools when working in the workshop and for assembly work.Technical dataModel Dustex 25 Dustex 40Input W 1 300 1 500Air flow l/min 3 300 3 600Max. vacuum mbar 230 270Tank volume l 24 40Socket connection max. W 2 000 2 000Weight according to EPTA kg 7,0 9,0Cable with plug m 6 6Part number 9 20 22 9 20 23Price includes1 suction hose, 5 m, Ø 36 mm, 1 groove nozzle, 1 upholstery nozzle, 1 universal connectingpiece, 1 connecting piece, 1 filter bagDustex 251 floor nozzle, 2 extension pipesDustex 401 nozzle for liquids, 1 convertible floor nozzle, 2 metal extension pipes<strong>FEIN</strong> benefits Automatic start/stop for connecting up powertools up to a maximum of 2000 W. Large range thanks to 6 m power cable and 5 msuction hose. Soft start function for smooth operation onthe building site. Wet and dry operation. Suction control. Extensive scope of supply for universal use. The ideal addition to the <strong>FEIN</strong> MULTIMASTER.For accessories, see page 221Emission values (sound/vibration) can be found at www.fein.com/vibration220
Genuine <strong>FEIN</strong> accessories for Dustex 25, Dustex 40General accessoriesTextile long-life filterfor efficient use of the dust extractor.Long service life, replaces filter bag andfilter cartridge.Floor nozzleHigh-quality convertible floor nozzlewith metal sliding surface. Universalsuitability for hard floors and textilefloor coverings.Dustex 25Filter bagStandard version, pack of 5Dustex 40Filter bagStandard version, pack of 5Part number 3 13 22 812 00 0Filter cartridgePart number 3 13 22 814 00 0Extension tubeMetal version, pack of 2Part number 3 13 22 781 01 7Extra fine version for higher levelsof material separation, pack of 5Part number 3 13 22 810 01 0Extra fine version for higher levelsof material separation, pack of 5Part number 3 13 22 765 00 9Nylon long-life filterfor efficient use of the vacuum cleaner,especially suited to stone dusts. Verylong service life, won’t clog even intough working conditions. The long-lifefilter replaces the filter bag.Part number 3 13 22 815 00 0Connecting piecefor connecting <strong>FEIN</strong> power tools.Part number 3 13 22 757 01 6Part number 3 13 22 811 01 0Part number 3 13 22 771 00 9Part number 3 13 22 813 00 0Suction hoseØ 36 mm, length 5 mUniversal connecting piecefor various connection diameters,e.g. for connecting up equipment fromother manufacturers.Part number 3 13 22 772 00 2SurfaceprocessingPart number 3 13 22 767 01 5Upholstery nozzlePart number 3 13 22 773 00 6Crevice nozzlePart number 3 13 22 774 00 4221
Oscillating222
Over 40 years of experience:oscillating power tools from <strong>FEIN</strong>.Backed by the unique experience acquired over more than40 years of oscillation technology, <strong>FEIN</strong> offers three systems<strong>FEIN</strong> MULTIMASTER, <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> and <strong>FEIN</strong><strong>SUPERCUT</strong> AUTOMOTIVE – which make up an unbeatablyversatile and powerful range of oscillating power tools. Eachsystem is synonymous with professional application solutionsand unrivalled load handling with a solution for everyrequirement. The <strong>FEIN</strong> <strong>SUPERCUT</strong> is the specialist for interiorwork with wood, repairing/replacing windows, tile restoration/bathroom renovation, heating/sanitary installation, groutrenewal, marine applications and vehicle glazing. As a universalsystem, the <strong>FEIN</strong> MULTIMASTER is the right choice for everyonewho strives for a versatile, professional tool. A wide rangeof accessories opens up a multitude of possible applications.<strong>FEIN</strong> MULTIMASTER Page 226The universal system for interior workand renovation.<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> Page 238The powerful system for interiorconstruction and renovation.<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE Page 257The powerful system for vehicle repairs.Oscillating223
OscillatingOne technology, three systems:the right system for every application.<strong>FEIN</strong> MULTIMASTERModelPageAFMM 14FMM 250FMM 250 QFMM 250 QFMM 250 QFMM 250 QThe universal system for interior fitting and renovation with extensive accessories for a widerange of applications.The universal system for interior fitting and renovation with basic equipment for the mostcommon applications.The universal system for interior work and renovation with basic equipment for the mostcommon applications and QuickIN convenience.The universal system for interior fitting and renovation with unique equipment includingextensive sanding accessories for a huge number of different applications.The universal system for interior fitting and renovation with extensive accessories for interiorfitting, maintenance and repair work on yachts.The universal system for interior fitting and renovation with unique equipment includingextensive sanding accessories for a huge number of different applications.227228229230231232<strong>FEIN</strong> <strong>SUPERCUT</strong><strong>CONSTRUCTION</strong>ModelPageAFSC 18The powerful system for interior fitting and renovation with special accessories for fast andprecise sawing work when fitting wood.239AFSC 18The powerful system for interior fitting and renovation with special accessories for dismantlingold windows and replacing putty-mounted insulation windows.240AFSC 18The powerful system for interior fitting and renovation with special accessories for perfectremoval of tiles and joints in bathroom renovation.241AFSC 18The powerful system for interior fitting and renovation with special accessories for the keyapplications in sanitary repairs.242AFSC 18The high-performance battery-powered oscillator with quick clamping system for interiors,renovation and the automotive industry.243FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for dismantlingold windows and replacing putty-mounted insulation windows.244FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for fast andprecise sawing work when fitting wood.245FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for perfectremoval of tiles and joints in bathroom renovation.246FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for the keyapplications in sanitary repairs.247FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for groutrenewal.248FSC 2.0 QThe powerful system for interior fitting and renovation with special accessories for quick andprecise working undertaking interior fitting, maintenance and repair work on yachts.249FSC 2.0 Q The powerful oscillator with quick clamping system for interior fitting and renovation. 250<strong>FEIN</strong> <strong>SUPERCUT</strong>AUTOMOTIVEModelPageAFSC 18 The high-performance battery-powered oscillator with quick clamping system for the automotive industry. 258AFSC 18The powerful system for vehicle repairs with special accessories for quick and safe removalof vehicle windows.259FSC 1.6 QThe powerful system for vehicle repairs with special accessories for versatile use in theautomotive workshop.260FSC 1.6 QThe powerful system for vehicle repairs with special accessories for quick and safe removalof vehicle windows.261FSC 1.6 QThe powerful system for vehicle repairs with special accessories for quick and professional removalof bonded windows on buses, lorries and rail vehicles.262FSC 1.6 Q The powerful oscillator with quick clamping system for the vehicle industry. 263FSC 1.6 The powerful oscillator for the vehicle industry. 264MOtlx 6-25 The powerful pneumatic oscillator for cargo. 265224
Input(W)Oscillations(rpm)Weight accordingto EPTA(kg)Sandingpad width(mm)Tool HolderCurrent/Voltages(V)Weightwith battery(kg)11 000-18 000 80 QuickIN 14,4 1,7250 11 000-20 000 1,2 80250 11 000-20 000 1,4 80 QuickIN250 11 000-20 000 1,4 80 QuickIN250 11 000-20 000 1,4 80 QuickIN250 11 000-20 000 1,4 80 QuickINInput(W)Battery voltage(V)Oscillations(rpm)Weightwith battery(kg)Weight accordingto EPTA(kg)18 11 000-18 500 2,0018 11 000-18 500 2,0018 11 000-18 500 2,0018 11 000-18 500 2,0018 11 000-18 500 2,00400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45Oscillating400 11 000-18 500 1,45Input(W)Oscillations(rpm)Weight accordingto EPTA(kg)Operating pressure(bar)Air consumption(m 3 /min)Hose size Ø(mm)11 000-18 50011 000-18 500400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,45400 11 000-18 500 1,2520 000 0,9 6,3 0,60 8225
<strong>FEIN</strong> MULTIMASTERVersatility and long service life:the <strong>FEIN</strong> MULTIMASTER.As a universal system for interior and renovation,the <strong>FEIN</strong> MULTIMASTER is the professional tool for peoplefor whom versatility is essential – without sacrificing longevity,when renovating in the home, on boats or on cars, for instance.The QuickIN clamping system contributes to the universalusability of the <strong>FEIN</strong> MULTIMASTER by ensuring particularly fasttool changes. The <strong>FEIN</strong> MULTIMASTER is available in different sets,consisting of different equipment and accessories. No matterwhat work is needing to be done, the <strong>FEIN</strong> MULTIMASTER is anexcellent renovation system of the highest professional quality.226
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTERBattery-powered oscillatorBattery-powered <strong>FEIN</strong> MULTIMASTERThe universal system for interior fitting and renovation with extensive accessories for a wide range of applications.Technical dataModel AFMM 14Battery voltage V 14,4Battery capacity Ah 3,0Weight with battery kg 1,7Tool HolderQuickINOscillations rpm 11 000-18 000Sanding pad width mm 80Part number 7 129 09 61<strong>FEIN</strong> benefits High-torque motor with exactly the same poweras the mains-powered version. High battery capacity and maximum performancethanks to 8 Li-ion cells. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem.Price includes1 <strong>FEIN</strong> MULTIMASTER AFMM 14, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 Universal E-CUT saw blade (44 mm), 1 E-CUT long-life saw blade (65 mm), 1 carbide segmentsaw blade, 1 carbide rasp (triangular), perforated, 1 HSS segment saw blade, 1 fixed scraper,2 battery packs (Li-ion), 1 rapid charger ALG 50Emission values (sound/vibration) can be found at www.fein.com/vibration Outstanding “Made in Germany” quality Charge status display on each battery. State-of-the-art Li-ion technology with individualcell monitoring. 8-star tool mounting with excellent torquetransfer. Electronic speed setting. Integrated interface for attaching additionalsystem accessories. Optimum handling thanks to soft grip zone. Wide range of accessories available for allapplications.OscillatingFor accessories, see page 233–237227
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTEROscillator – 250 W<strong>FEIN</strong> MULTIMASTER StartThe universal system for interior fitting and renovation with basic equipment for the most common applications.Technical dataModel FMM 250Input W 250Oscillations rpm 11 000-20 000Weight according to EPTA kg 1,2Cable with plug m 5Sanding pad width mm 80Part number 7 229 36 62Price includes1 <strong>FEIN</strong> MULTIMASTER FMM 250, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 Universal E-CUT saw blade (44 mm), 1 HSS segment saw blade, 1 fixed scraper, 1 wrench andtensioning screws, 1 plastic carrying caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to metalgear head, consistent use of ball / needle rollerbearings and a motor designed for continuoususe. 8-star tool mounting with excellent torquetransfer. High-performance 250 watt motor. Electronic speed setting. Wide range of accessories available for allapplications. Integrated interface for attaching additionalsystem accessories. Optimum handling thanks to soft grip zone. Manual tool change with tightening key. Price includes set of useful accessories for keyapplications.For accessories, see page 233–237228
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTEROscillator – 250 W<strong>FEIN</strong> MULTIMASTER QuickStartThe universal system for interior work and renovation with basic equipment for the most commonapplications and QuickIN convenience.Technical dataModelFMM 250 QInput W 250Oscillations rpm 11 000-20 000Weight according to EPTA kg 1,4Cable with plug m 5Sanding pad width mm 80Tool HolderQuickINPart number 7 229 37 66Price includes1 <strong>FEIN</strong> MULTIMASTER FMM 250 Q, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 Universal E-CUT saw blade (44 mm), 1 HSS segment saw blade, 1 fixed scraper,1 plastic carrying caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to metalgear head, consistent use of ball / needle rollerbearings and a motor designed for continuoususe. convenient accessory changes without theneed for extra tooling with with the QuickINclamping system. 8-star tool mounting with excellent torquetransfer. Electronic speed setting. Wide range of accessories available for allapplications. Integrated interface for attaching additionalsystem accessories. High-performance 250 watt motor. Optimum handling thanks to soft grip zone. Price includes set of useful accessories for keyapplications.OscillatingFor accessories, see page 233–237229
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTEROscillator – 250 W<strong>FEIN</strong> MULTIMASTER TopThe universal system for interior fitting and renovation with unique equipment including extensive sanding accessoriesfor a huge number of different applications.Technical dataModelFMM 250 QInput W 250Oscillations rpm 11 000-20 000Weight according to EPTA kg 1,4Cable with plug m 5Sanding pad width mm 80Tool HolderQuickINPart number 7 229 37 68Price includes1 <strong>FEIN</strong> MULTIMASTER FMM 250 Q, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 Sanding plate with holes, 5 sanding sheets perforated each grit size 60, 80, 120, 180, 1 backingpad Ø 115 mm, perforated, Perforated sanding sheets, 2 each of grit 60, 80, 180, 1 UniversalE-CUT saw blade (44 mm), 1 E-CUT long-life saw blade (35 mm), 1 E-CUT long-life saw blade(65 mm), 1 M-CUT saw blade (10 mm), 1 M-CUT saw blade (30 mm), 1 HSS segment saw blade,1 carbide segment saw blade, 1 carbide rasp (triangular), perforated, 1 fixed scraper,1 dust extraction device, 1 plastic carrying caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to metalgear head, consistent use of ball / needle rollerbearings and a motor designed for continuoususe. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. 8-star tool mounting with excellent torquetransfer. Electronic speed setting. Wide range of accessories available for allapplications. Price includes high-quality plastic case and fullequipment for most applications Integrated interface for attaching additionalsystem accessories. High-performance 250 watt motor. Optimum handling thanks to soft grip zone.For accessories, see page 233–237230
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTEROscillator – 250 W<strong>FEIN</strong> MULTIMASTER MarineThe universal system for interior fitting and renovation with extensive accessoriesfor interior fitting, maintenance and repair work on yachts.Technical dataModelFMM 250 QInput W 250Oscillations rpm 11 000-20 000Weight according to EPTA kg 1,4Cable with plug m 5Sanding pad width mm 80Tool HolderQuickINPart number 7 229 37 70Price includes1 <strong>FEIN</strong> MULTIMASTER FMM 250 Q, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 dust extraction device, 1 Sanding plate with holes, 5 sanding sheets perforated each gritsize 60, 80, 120, 180, 1 saw and file set, 1 Universal E-CUT saw blade (44 mm), 1 HSS sawblade (Ø 80 mm), 1 carbide segment saw blade, 1 fixed scraper, 1 of each deck cutter blade(4+5 mm), 2 felt polishing pads 115 mm in diameter, 2 felt polishing pads, triangular,1 backing pad Ø 115 mm, perforated, Perforated sanding sheets, 2 each of grit 60, 80, 180,1 plastic carrying caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to metalgear head, consistent use of ball / needle rollerbearings and a motor designed for continuoususe. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. 8-star tool mounting with excellent torquetransfer. Electronic speed setting. Wide range of accessories available for allapplications. Price includes high-quality plastic case and fullequipment for most marine applications Integrated interface for attaching additionalsystem accessories. High-performance 250 watt motor. Optimum handling thanks to soft grip zone.OscillatingFor accessories, see page 233–237231
<strong>FEIN</strong> MULTIMASTER<strong>FEIN</strong> MULTIMASTEROscillator – 250 W<strong>FEIN</strong> MULTIMASTER Top ExtraThe universal system for interior fitting and renovation with unique equipment including extensive sanding accessoriesfor a huge number of different applications.Technical dataModelFMM 250 QInput W 250Oscillations rpm 11 000-20 000Weight according to EPTA kg 1,4Cable with plug m 5Sanding pad width mm 80Tool HolderQuickINPart number 7 229 37 69Price includes1 <strong>FEIN</strong> MULTIMASTER FMM 250 Q, 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120, 180,1 Sanding plate with holes, 5 sanding sheets perforated each grit size 60, 80, 120, 180,1 backing pad Ø 115 mm, perforated, Perforated sanding sheets, 2 each of grit 60, 80, 180,1 Universal E-CUT saw blade (44 mm), 1 E-CUT long-life saw blade (35 mm), 1 E-CUT long-lifesaw blade (65 mm), 1 M-CUT saw blade (10 mm), 1 M-CUT saw blade (30 mm), 1 HSS segmentsaw blade, 1 carbide segment saw blade, 1 carbide rasp (triangular), perforated, 1 fixed scraper,1 dust extraction device, 1 plastic carrying case, 1 <strong>FEIN</strong> Dustex 25 dust extractorEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to metalgear head, consistent use of ball / needle rollerbearings and a motor designed for continuoususe. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. 8-star tool mounting with excellent torquetransfer. Electronic speed setting. Wide range of accessories available for allapplications. Price includes high-quality plastic case and fullequipment for (almost) all applications Integrated interface for attaching additionalsystem accessories. High-performance 250 watt motor. Optimum handling thanks to soft grip zone.For accessories, see page 233–237232
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> MULTIMASTERSawingHSS saw blade, circularFor plastics, fibreglass, wood, putty,non-ferrous metal and sheet metal upto about 1 mm.E-CUT standard saw bladesSaw wood up to 50 mm, plasterboardand soft plastics. You can plunge ineasily at any point in the material.Length 50 mm, form 133E-CUT universal saw bladesBroad range of applications withbi-metal teeth. Saws wood up to50 mm, plastics, sheet metal up to2 mm, copper or aluminium pipes andprofiles.Length 60 mm, form 151E-CUT-ComboConsisting of 3 different E-CUT sawblades: 1 x E-CUT Precision 65 mmwide, 1 x E-CUT Standard 35 mm wide,1 x E-CUT Universal 44 mm wide.With these blades, you are equippedfor any sawing job.Ø No. in packmm pcs Part number63 1 6 35 02 096 02 363 2 6 35 02 096 01 763 5 6 35 02 096 05 080 1 6 35 02 097 02 780 2 6 35 02 097 01 180 5 6 35 02 097 05 0Width No. in packmm pcs Part number35 1 6 35 02 133 01 735 3 6 35 02 133 03 035 10 6 35 02 133 04 0Length 50 mm, form 134Width No. in packmm pcs Part number29 1 6 35 02 151 01 829 3 6 35 02 151 02 029 10 6 35 02 151 03 0Length 60 mm, form 152Part number 6 35 02 127 04 0HSS saw blade woodRound HSS saw blade wood – the“mini circular saw” is idea for long,straight cuts and for cutting out ofinstalled parquet, laminate and wallpanels.HSS segment saw bladeFor plastics, fibreglass, wood, putty,non-ferrous metal and sheet metal upto about 1 mm. Ideal for working incorners.Ø No. in packmm pcs Part number80 1 6 35 02 106 01 580 2 6 35 02 106 07 080 5 6 35 02 106 08 0HSS saw blade, circular, crankedFor plastics, fibreglass, wood, putty,non-ferrous metal and sheet metal upto about 1 mm, flush to the surface.Width No. in packmm pcs Part number65 1 6 35 02 134 01 565 3 6 35 02 134 02 565 10 6 35 02 134 03 0E-CUT precision saw bladesHighest cutting speed and precisionthanks to double-row Japan toothing.For wood up to 50 mm, plasterboardand soft plastics.Length 50 mm, form 126Width No. in packmm pcs Part number35 1 6 35 02 126 01 335 3 6 35 02 126 03 035 10 6 35 02 126 04 0Length 50 mm, form 127Width No. in packmm pcs Part number44 1 6 35 02 152 01 044 3 6 35 02 152 02 044 10 6 35 02 152 03 0E-CUT long-life saw bladesBi-metallic teeth, stepped, high cuttingspeed. Extremely durable and robust.For hardwood, softwood and all otherwooden materials – including thosewith nails. Also perfectly suited toplastics and plasterboard.Length 50 mm, form 160Width No. in packmm pcs Part number35 1 6 35 02 160 01 035 3 6 35 02 160 02 035 10 6 35 02 160 03 0Ø No. in packmm pcs Part number100 1 6 35 02 154 01 0With depth stopØmmPart number100 3 26 07 065 02 0Contact guardSpare contact guard for HSS saw blade6 35 02 154 01 0.Part number 3 18 10 263 00 0Depth stopDepth stopFits all E-CUT saw blades as well as theHSS saw blade wood.OscillatingØNo. in packLength 50 mm, form 161mm pcs Part number85 1 6 35 02 144 01 485 5 6 35 02 144 02 0Segment saw blade, angledOnly for soft materials. Ideal forworking in corners, flush to thesurface.Width No. in packmm pcs Part number65 1 6 35 02 127 01 765 3 6 35 02 127 02 065 10 6 35 02 127 03 0Width No. in packmm pcs Part number65 1 6 35 02 161 01 065 3 6 35 02 161 02 065 10 6 35 02 161 03 0Part number 3 26 07 065 01 0ØmmPart number84 6 35 02 113 01 9233
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> MULTIMASTERM-CUT Saw BladeFor making cut-outs in fibreglass,CFRP, wood and sheet metal, withan edge length of 10 mm or more,max. cutting depth: approx. 28 mm(fibreglass, wood), in sheet metalapprox. 1 mm, length 50 mmMINICUT saw bladeFor wood and other soft materials,plunge depth 30 mm, pack of 2.Carbide rasp, finger-shapedFor rough sanding of filler, tileadhesives, concrete, stone and wood.The finger shape, coated on both sides,is especially well suited for artisticwork.Diamond-coated saw bladeFor cutting through marble andconcrete trass joints. Little dust iscreated, long service life.Cutting width approx. 2,2 mm.WidthNo. in packWidth No. in packmm pcs Part number10 2 6 35 02 159 01 0For making cut-outs in fibreglass,CFRP, wood and sheet metal, withan edge length of 30 mm or more,max. cutting depth: 45 mm (fibreglass,wood), in sheet metal approx. 1 mm,length 50 mmmm pcs Part number10 2 6 35 02 132 01 320 2 6 35 02 131 01 0MINICUT HSS saw bladeFor non-ferrous metals and plastics,plunge depth 20 mm, pack of 2.Part number 6 37 31 002 01 7Remove groutsCarbide segment saw bladeFor cutting out damaged tile joints andfor cutting grooves in plaster, porousconcrete and similar constructionmaterials.Cutting width approx. 1,2 mm.Ø No. in packmm pcs Part number63 1 6 35 02 105 01 263 5 6 35 02 105 02 0Diamond-coated segmentsaw bladeFor cutting out damaged tile joints andfor cutting grooves in plaster, porousconcrete and similar constructionmaterials. Long service life.Cutting width approx. 2,2 mm.WidthNo. in packmm pcs Part number10 2 6 35 02 130 01 120 2 6 35 02 129 01 9Width No. in packmm pcs Part number30 2 6 35 02 157 01 0Carbide fileFor deburring and filing cut-outs infibreglass, CFRP, plastics and wood,length 50 mmDiamond fileFor sharpening blades and cutters.Ø No. in packmm pcs Part number90 1 6 35 02 170 01 090 5 6 35 02 170 02 0Cutting width approx. 2,2 mm.Ø No. in packmm pcs Part number63 1 6 35 02 114 01 763 5 6 35 02 114 02 090 1 6 35 02 166 01 090 5 6 35 02 166 02 0Width No. in packmm pcs Part number10 2 6 37 06 017 01 0saw and file set FMMSawing and filing set for makingrecesses in fibreglass, CFRP, wood andsheet metal. M-CUT saw blade, 10 mmand 30 mm, carbide file, 10 mmGrain Widthmm Part numberextra fine 10 6 37 06 014 02 6Fein 20 6 37 06 013 02 8Normal 20 6 37 06 012 02 4Carbide fileFor filing out cut-outs as well as fordeburring. Fits on MINICUT and file set.Ø No. in packmm pcs Part number63 1 6 35 02 118 01 690 1 6 35 02 169 01 090 5 6 35 02 169 02 0Cutting width approx. 4 mm.Ø No. in packmm pcs Part number90 1 6 35 02 171 01 090 5 6 35 02 171 02 0Cleaning blockRhombus for cleaning the carbide toolsand diamond-coated tools.Part number 6 37 19 007 01 0Part number 6 35 02 157 02 0MINICUT and File setFor cuts as of 10 mm. 2 saw bladesfor wood and soft plastics, 2 HSS sawblades for hard plastics, fibreglass andsheet metal up to 1 mm, 1 diamondfile, 1 carbide file.Part number 6 37 06 015 01 0RaspingCarbide rasp, triangularFor rough sanding of filler, tileadhesives, concrete, stone and wood.For use with or without dust extractor.Standard version,edge length of 80 mm.Carbide saw bladeFor reworking deck joints.Also suited to cutting out tile joints.Cutting width approx. 1.3 mm.ØmmPart number63 6 35 02 125 01 0Part number 6 37 31 001 01 4Part number 6 39 01 025 06 0234
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> MULTIMASTERScrapingFixed Scraper BladeFor removing tough old lacquers,remainders of adhesives, carpeting,tile adhesives and undersealcoatings.Set of sanding sheetsFor universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. Each with 10 sandingsheets, unperforated, with Velcrorapid attachment, grain 60, 80, 120,180, 240.Supersoft sanding padFor special applications such asaluminium rims and paint repair. Useonly with “sanding sheets, supersoft”,2-pack.Stone sanding setUniversal application in the fields ofstone processing and stone products.Consists of 5 of each sanding sheetgrades, without holes, grit 40, 80, 120,220, 320, 400, 600, 800, 1 sanding pad,without holes, with aluminium andplastic backing plate, 1 felt polishingpad.Part number 6 38 06 129 06 7LengthmmPart number50 6 39 03 178 01 768 6 39 03 226 01 0Part number 6 37 17 082 03 3No. in packpcsPart number2 6 38 06 141 02 6Stone sanding sheetsSpecial for processing natural andartificial stone. In 8 steps for roughto finishing sanding.Flexible Scraper BladeTo remove silicone and acrylic jointsin sanitary areas as well as stickers.Sanding sheetsUnperforated, with Velcro attachment.For universal application on nearly allsurfaces.Supersoft sanding sheetsSpecial sanding sheets for vehiclepainting works, repairs, paint runs,overspraying, wheel-rim painting, etc.Only to be used in conjunction withthe sanding pad 6 38 06 141 02 6.Grain No. in packpcs Part number40 50 6 37 17 120 01 480 50 6 37 17 121 01 3120 50 6 37 17 122 01 6220 50 6 37 17 123 01 0320 50 6 37 17 124 01 8400 50 6 37 17 125 01 2600 50 6 37 17 175 01 7800 50 6 37 17 176 01 0No. in packpcsPart number2 6 39 03 165 01 3GrindingSanding pad set, unperforatedFor sanding without extraction.2-pack.No. in packpcsPart number2 6 38 06 129 02 6Sanding pad set, plasticWith plastic backing plateto avoid scratch marks.Pack of 2.No. in packpcsPart number2 6 38 06 153 02 2Sanding pad set, flatfor very narrow openings(slats of window shutters etc.).Pack of 2No. in packpcsPart number2 6 38 06 142 02 9Grain No. in packpcs Part number36 5 6 37 17 086 04 840 5 6 37 17 081 04 660 5 6 37 17 082 04 980 5 6 37 17 083 04 3100 5 6 37 17 084 04 1120 5 6 37 17 085 04 5150 5 6 37 17 087 04 2180 5 6 37 17 088 04 0220 5 6 37 17 089 04 4240 5 6 37 17 090 04 636 50 6 37 17 086 01 040 50 6 37 17 081 01 860 50 6 37 17 082 01 180 50 6 37 17 083 01 5100 50 6 37 17 084 01 3120 50 6 37 17 085 01 7150 50 6 37 17 087 01 4180 50 6 37 17 088 01 2220 50 6 37 17 089 01 6240 50 6 37 17 090 01 8Zirconium sanding sheetsExcellent sanding capacity onextremely hard surfaces such as varnish(e.g. parquet paint) or metal. Thesanding sheet for all floor coveringwork. Extremely sturdy paper qualitythanks to extremely tough full bondingwith artificial resins and high-qualityzirconium corundum coating.Grain No. in packpcs Part number40 35 6 37 17 243 01 060 35 6 37 17 244 01 080 35 6 37 17 245 01 0Grain No. in packpcs Part number240 50 6 37 17 126 01 5320 50 6 37 17 127 01 9400 50 6 37 17 128 01 7500 50 6 37 17 179 01 6Profile sanding setConsisting of 1 holder and 6 differentprofiles: 1 V-form for 90° angle,1 trapezium for tongue-and-grooveconnections, 1 for straight profiles,1 for convex forms (large), 1 eachfor concave and convex forms (small),as well as 5 sanding sheets grit 80, 120,and 180.Part number 6 38 06 183 01 3Sandpaper for profile sanding setFor nearly all materials, e.g. wood,metal, lacquer and plastics. pack of 25.Grain No. in packpcs Part number80 25 6 37 17 217 01 6120 25 6 37 17 218 01 4180 25 6 37 17 219 01 8Sanding fingerFor use in extremely tight and hiddenspots, in channels, grooves, openings,folds and joints. Also for mouldmaking,in concave and convex forms.2-pack.Height No. in packmm pcs Part number7 2 6 38 06 159 02 3Sanding sheets for sanding fingersWith Velcro rapid attachment, fullybonded with artificial resin, highsanding capacity, corundum. For useon: wood, metal, soldered joints,fibreglass, plastic, paint, filler, leather.Pack of 20Grain No. in packpcs Part number40 20 6 37 17 184 01 260 20 6 37 17 185 01 680 20 6 37 17 186 01 9100 20 6 37 17 187 01 3120 20 6 37 17 188 01 1150 20 6 37 17 189 01 5180 20 6 37 17 190 01 7220 20 6 37 17 191 01 6240 20 6 37 17 192 01 9Oscillating235
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> MULTIMASTERSanding pad set, perforatedFor sanding with dust extractor.2-pack.No. in packpcsPart number2 6 38 06 136 02 9Zirconium sanding sheetsPerforated, with hook and loopfastening. For sanding with or withoutdust extraction. Excellent sandingcapacity on extremely hard surfacessuch as varnish (e.g. parquet paint) ormetal. The sanding sheet for all floorcovering work. Extremely sturdy paperquality thanks to extremely tough fullbonding with artificial resins andhigh-quality zirconium corundumcoating.Zirconium sanding sheetsPerforated, diameter 115 mm, withhook and loop fastening. For sandingwith or without dust extraction.Excellent sanding capacity onextremely hard surfaces such asvarnish (e.g. parquet paint) or metal.The sanding sheet for all floor coveringwork. Extremely sturdy paper qualitythanks to extremely tough full bondingwith artificial resins and high-qualityzirconium corundum coating.Felt polishing padFelt polishing pad for polishing boatdecks (gelcoat), chrome, stainlesssteel, aluminium, copper and copperalloys.No. in packpcsPart number5 6 37 23 032 01 0Set of sanding sheets10 of each type of sanding sheet,perforated with Velcro rapidattachment, corundum, grit 60, 80,120, 180, and 240.Grain No. in packpcs Part number40 35 6 37 17 236 01 060 35 6 37 17 237 01 080 35 6 37 17 238 01 0Grain No. in packpcs Part number40 12 6 37 17 233 01 060 12 6 37 17 234 01 080 12 6 37 17 235 01 0Diameter 115 mm, with hook and loopfastening. Versatile in use, for polishingchrome, stainless steel, polycarbonatematerials and gelcoat boat decks,for polishing up scratched paint andremoving tempering colours onexhaust systems.Part number 6 37 17 109 03 5Sanding sheets, perforatedFor sanding with dust extractor.For universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. From grain 36 to 240.Backing pad setFor fast and cost-effective sanding ofmedium-sized surfaces, incl. 1 backingpad with a Ø of 115 mm, perforated.Sanding sheets, perforated, with hookand loop fastening, 2 each of grit 60,80, 180.Zirconium sanding sheet setSanding sheets, 4 each of grit 40, 60,80, diameter 115 mm, perforated withhook and loop fastening. Excellentsanding capacity on extremely hardsurfaces such as varnish (e.g. parquetpaint) or metal. The sanding sheet forall floor covering work. Extremelysturdy paper quality thanks toextremely tough full bonding withartificial resins and high-qualityzirconium corundum coating.No. in packpcsPart number5 6 37 23 036 01 0Bristle fleeceBristle fleece for cleaning boat decks orcleaning/polishing anti-slip structures.ØmmPart number115 6 38 06 195 02 0Grain No. in packpcs Part number36 5 6 37 17 107 04 940 5 6 37 17 108 04 760 5 6 37 17 109 04 180 5 6 37 17 110 04 3100 5 6 37 17 111 04 2120 5 6 37 17 112 04 5150 5 6 37 17 113 04 9180 5 6 37 17 114 04 7220 5 6 37 17 115 04 1240 5 6 37 17 116 04 436 50 6 37 17 107 01 140 50 6 37 17 108 01 960 50 6 37 17 109 01 380 50 6 37 17 110 01 5100 50 6 37 17 111 01 4120 50 6 37 17 112 01 7150 50 6 37 17 113 01 1180 50 6 37 17 114 01 9220 50 6 37 17 115 01 3240 50 6 37 17 116 01 6Set of sanding sheetsSanding sheets with a Ø of 115 mm,perforated, with hook and loopfastening, fully bonded with artificialresins for effective material removal,4 each of grit 60, 80, 120, 180.Part number 6 37 17 227 01 0Sanding sheetsPerforated, with hook and loopfastening, fully bonded with artificialresins for effective material removal.Part number 6 37 17 233 02 0PolishingSet of felt polishing padsFor polishing metal parts, as well asfor polishing and decorative polishingof stone and stone products. Gelcoatlayers on boats can also be polished.Pack of 2.Burnishing compounds for therespective material are available fromspecialist retailers.No. in packpcsPart number2 6 37 23 031 01 0Polishing liquid<strong>FEIN</strong> polish EXTRA based onaluminium oxide for polishinggelcoat and removing scratches invehicle paint.ContentsmlPart number250 6 37 26 030 01 0No. in packpcsPart number2 6 38 06 140 02 7All-purpose yacht cleanerCleans boat hulls and decks, can alsobe used for aluminium, glass, plasticand textiles.Grain No. in packpcs Part number40 16 6 37 17 230 02 060 16 6 37 17 227 02 080 16 6 37 17 228 02 0120 16 6 37 17 229 01 0180 16 6 37 17 231 02 0240 16 6 37 17 232 01 0ContentsmlPart number500 6 37 26 021 01 0236
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> MULTIMASTERAnti-yellowing sprayEffortlessly removes yellow stains andalgae from the waterline, as well asrust stains, easy and straightforward toapply, will not damage plastic and onlya small amount required.Segment blade, convexFor cutting rigid materials, e.g. floortiles made of plastic, linoleum, rubber,cardboard, leather, wire meshing,looped fabric/carpets, and many others.For the battery-powered MULTIMASTER.Part number 9 26 02 086 01 0Carrying case, filledFilled plastic case with 1 sanding pad,perforated, for dust extraction, sandingsheets, 5 of each, perforated, grit 60,80, 120, 180, 1 dust extraction device,2 hose sockets for suction hose witha Ø of 27/32 mm and 2 adaptersfor connection to the most commonhousehold vacuum cleaners, profilesanding set, 1 carbide rasp.ContentsmlPart number500 6 37 26 022 01 0Yacht polishEasy to use, achieves brilliant shine:For fibreglass/gelcoat and paintedyachts – optimum results even withdark colours.Part number 6 39 03 192 01 4Cutting bladeFor cutting away panelled deck sealantmaterials quickly and safely. Also idealfor difficult areas such as cabins, rails,gunwales, cleats, and curves.Adapter hoseFor connecting the dust extractiondevice to the most widely-usedhousehold dust extractors.The adapter hose is pushed ontothe hose sleeve for hose connectionsof Ø 27 mm.ModelPart numberthin 3 06 05 110 00 8thick 3 06 05 109 00 6ContentsmlPart number500 6 37 26 020 01 0Carnauba wax + cleanerHigh-gloss seal with long-lastingeffect: antistatic, impact-resistant,shampoo-resistant. Protects youryacht like a second skin.Blade width No. in packmm pcs Part number3 1 6 39 03 200 01 74 1 6 39 03 201 01 65 1 6 39 03 202 01 9General accessoriesCutting pasteLubricating agents for working onsheet metals.<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.Part number 3 39 01 118 17 0Special accessories forAFMM 14Battery packLi-ion 14.4 V, 3 Ah, with chargemonitoring displayPart number 9 26 04 153 02 0ContentsPart number 3 21 32 020 12 9Quick charger ALG 50For all <strong>FEIN</strong> Li-ion batteries. Chargetime from 45 min.mlPart number500 6 37 26 023 01 0Nano wax + cleanerHard-wearing long-term seal: antistatic,impact-resistant, shampoo-resistant.Very fine due to nanoparticles, fills inscratches, protects from the weatherand UV rays.Cleaning blockRhombus for cleaning the carbide toolsand diamond-coated tools.Part number 6 37 19 007 01 0Table-top and drill jigs supportPerfect for precision cut-outs:the <strong>FEIN</strong> MULTIMASTER can beclamped to a table or work benchand the work piece safely fed to it.Clamping in drill stands witha standard 43 mm dia. collar clampis possible.Part number 9 26 04 129 01 0OscillatingContentsmlPart number500 6 37 26 024 01 0CuttingSegment blade, concaveFor cutting soft materials e.g. felt,leather, polystyrene.Dust extraction set2 sanding pads, perforated; sandingsheets, perforated, 5 each of grit 60,80, 120; 1 extractor hood withsuction pipe; 2 hose sockets for hoseconnection with a diameter of 27 and32 mm and 2 adapters for connectingto the most common householdvacuum cleaners.For the mains-powered version of theMULTIMASTER.Part number 9 26 02 083 01 0Carrying case, unfilledPlastic case with practical innerlayout, tool and accessories notincluded.Part number 6 39 03 193 01 8Part number 9 26 02 081 01 0Part number 3 39 01 118 03 0237
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> –all the power and load handling you need.<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>, the powerful system for interiorand renovation, is the power tool of choice for all professionalsin the specified trades. The powerful 400 W high-power motorand durable transmission are designed to stand up to thetoughest use. With its higher motor rating and a strongeroscillating motion, the <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> helps youachieve maximum progress and therefore enormous savings interms of time and cost. The powerful system for interior andrenovation is available in six different sets for repairing/replacingwindows, interior work with wood, tile restoration/bathroomrenovation, heating/sanitary installation, grout renewal andmarine applications. The contents of each set are carefullyselected for the requirements and tasks of the particular trade.238
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered oscillator<strong>FEIN</strong> professional set for interior work with woodThe powerful system for interior fitting and renovation with special accessories for fast and precise sawing work when working with wood.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 01 52Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 1 HSS saw blade wood,4 E-CUT long-life saw blades (shape 162, 163, 164, 165), 4 E-CUT precision saw blades(form 119, 120, 121, 122), 1 each E-CUT universal saw blade (form 147, 148), 1 depth stop,1 sanding pad, 5 Sanding sheets each grit size (K 80, 120, 180), 1 adapter and 2 tensioningelements, 2 battery packs (Li-ion), 1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits High-performance battery-powered <strong>SUPERCUT</strong>developed specially for use in interiors andwoodworking. Complete set in high-quality tool case withthe key accessories for the most commonapplications in this area. Can also be used as a fully-functional deltasander for accurate grinding in corners and edgeswithout kickback. Same performance as the mains-powered tool. State-of-the-art Li-ion technology with individualcell monitoring. Powerful 18 V Li-ion batteries with chargecontrol display. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer.OscillatingFor accessories, see page 251–256239
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered oscillator<strong>FEIN</strong> professional set for repairing/replacing windowsThe powerful system for interior fitting and renovation with special accessories for dismantlingold windows and replacing putty-mounted insulation windows.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 01 51Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 1 HSS saw blade, cropped,Ø 100 mm, 1 HSS saw blade wood, 1 E-CUT long-life saw blade (shape 163), 1 each E-CUTuniversal saw blades (form 147, 148), 1 Cutter blade, mushroom shaped, 1 depth stop,1 sanding pad, 5 Sanding sheets each grit size (K 80, 120, 180), 1 adapter and 2 tensioningelements, 2 battery packs (Li-ion), 1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits High-performance battery-powered <strong>SUPERCUT</strong>designed specially for use in repairing/replacingwindows with a time saving of up to 80%. Complete set in high-quality tool case withthe key accessories for the most commonapplications in this area. Ideal for use on the construction site to removeold window frames without damaging the wallsor plaster, or alternatively to repair insulatedwindows. Same performance as the mains-powered tool. State-of-the-art Li-ion technology with individualcell monitoring. Powerful 18 V Li-ion batteries with chargecontrol display. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer.For accessories, see page 251–256240
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered oscillator<strong>FEIN</strong> professional set for tile restoration/bathroom renovationThe powerful system for interior fitting and renovation with special accessories for perfect removalof tiles and joints in bathroom renovation.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 01 53Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 1 Segment blade, diamondcoated(form 162), 1 carbide segment blade (form 224), 1 each E-CUT universal saw blade(form 147, 148), 1 Cutter blade, mushroom shaped, 1 Stopper knife, 2 Rasps, carbide-coated,triangular, perforated for dust extractor, 1 adapter and 2 tensioning elements, 2 battery packs(Li-ion), 1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits High-performance battery-powered <strong>SUPERCUT</strong>developed specially for use in tile restoration/bathroom renovation. Complete set in high-quality tool case withthe key accessories for the most commonapplications in this area. For accurate and clean installation andrenovation work producing very little dirtand dust. Same performance as the mains-powered tool. State-of-the-art Li-ion technology with individualcell monitoring. Powerful 18 V Li-ion batteries with chargecontrol display. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer.OscillatingFor accessories, see page 251–256241
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Battery-powered oscillator<strong>FEIN</strong> professional set for heating/sanitary installationThe powerful system for interior fitting and renovation with special accessories for the key applications in sanitary repairs.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 01 56Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 1 Segment blade, diamondcoated(form 162), 1 of each cutting tool (12, 13 and 22 mm), 1 Cutter blade, straight, long(form 116), 1 each E-CUT universal saw blade (form 147, 148), 1 Stopper knife, 1 carbidecoatedrasp, triangular, perforated for dust extraction, 1 adapter and 2 tensioning elements,2 battery packs (Li-ion), 1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits High-performance battery-powered <strong>SUPERCUT</strong>developed specially for use in tile heating/sanitary installation. Complete set in high-quality tool case withthe key accessories for the most commonapplications in this area. Including special cutting tools for laying hotwater pipes or empty electrical pipes in rigidfoam panels. Same performance as the mains-powered tool. State-of-the-art Li-ion technology with individualcell monitoring. Powerful 18 V Li-ion batteries with chargecontrol display. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer.For accessories, see page 251–256242
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong>Battery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong>Battery-powered oscillatorAFSC 18The high-performance battery-powered oscillator with quick clamping system for interiors, renovation and the automotive industry.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 01<strong>FEIN</strong> benefits Same performance as the mains-powered tool,with outstanding work progress for professionaluse in a large number of tasks/sectors. Powerful 18 V Li-ion batteries with chargecontrol display. State-of-the-art Li-ion technology with individualcell monitoring.Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 2 battery packs (Li-ion),1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration Quick charger with 25-30 minutes of charge timefor continuous working without interruption. All <strong>FEIN</strong> <strong>SUPERCUT</strong> accessories can be used. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer. Electronic speed control.OscillatingFor accessories, see page 251–256243
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for repairing/replacing windowsThe powerful system for interior fitting and renovation with special accessories for dismantlingold windows and replacing putty-mounted insulation windows.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 51Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool case, 1 HSS saw blade, cropped, Ø 100 mm,1 HSS saw blade wood, 1 E-CUT long-life saw blade (shape 163), 1 each E-CUT universal sawblades (form 147, 148), 1 Cutter blade, mushroom shaped, 1 depth stop, 1 sanding pad,5 Sanding sheets each grit size (K 80, 120, 180), 1 adapter and 2 tensioning elementsEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Extracting of old window frames withoutdamaging the walls or the plaster Repair of the insulation windows withoutbreaking the old panes Cuts time required by up to 80%For accessories, see page 251–256244
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for interior work with woodThe powerful system for interior fitting and renovation with special accessories for fast and precise sawing work when fitting wood.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 52Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool case, 1 HSS saw blade wood, 4 E-CUT long-lifesaw blades (shape 162, 163, 164, 165), 4 E-CUT precision saw blades (form 119, 120, 121, 122),1 each E-CUT universal saw blade (form 147, 148), 1 depth stop, 1 sanding pad,5 Sanding sheets each grit size (K 80, 120, 180), 1 adapter and 2 tensioning elementsEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Clean cuts even by hand; no clamping of theworkpiece necessary Powerful oscillating motion for maximum workprogress Can also be converted to a delta sander developed specially for use in interiors andwoodworking.OscillatingFor accessories, see page 251–256245
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for tile restoration/bathroom renovationThe powerful system for interior fitting and renovation with special accessoriesfor the perfect removal of tiles and joints in bathroom renovation.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 53Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool case, 1 Segment blade, diamond-coated(form 162), 1 carbide segment blade (form 224), 1 Cutter blade, mushroom shaped, 1 Stopperknife, 2 Rasps, carbide-coated, triangular, perforated for dust extractor, 1 each E-CUT universalsaw blade (form 147, 148), 1 adapter and 2 tensioning elementsEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Also ideal for all fitting work Minimal dirt and dust Powerful oscillating motion(amplitude 2 x 2.0 degrees) for maximumwork progress developed specially for use in tile restoration/bathroom renovation.For accessories, see page 251–256246
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for heating/sanitary installationThe powerful system for interior fitting and renovation with special accessories for the key applications in sanitary installation.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 56Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool case, 1 Segment blade, diamond-coated(form 162), 1 of each cutting tool (12, 13 and 22 mm), 1 Cutter blade, straight, long (form 116),1 each E-CUT universal saw blade (form 147, 148), 1 Stopper knife, 1 carbide-coated rasp,triangular, perforated for dust extraction, 1 adapter and 2 tensioning elementsEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Also ideal for all fitting work Minimal dirt and dust Powerful oscillating motion(amplitude 2 x 2.0 degrees) for maximumwork progress developed specially for use in tile heating/sanitary installation. Complete set in high-quality tool case withthe key accessories for the most commonapplications in this area. Including special cutting tools for laying hotwater pipes or empty electrical pipes in rigidfoam panels.OscillatingFor accessories, see page 251–256247
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for grout renewalThe powerful system for the removal and renovation of grout joints in concrete sectional buildings.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 54Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in metal tool case, 1 Vibration-attenuating bail handle,1 dust extraction device, 5 Cutter blades, straight (form 117), 1 Cutter blade, straight, long(form 116), 2 Cleaning knives, diamond-coated, straight (form 161), 1 cleaning blockEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Ergonomic design for fatigue-free working Powerful oscillating motion(amplitude 2 x 2.0 degrees) for maximumwork progress Vibration-attenuating bail handle for minimisingphysical fatigue Dust extraction device, attachable without toolsFor accessories, see page 251–256248
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 W<strong>FEIN</strong> professional set for marine applicationsThe powerful system for interior fitting and renovation with specialist accessories for undertaking precise interior fitting andmaintenance work on yachts and boats.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 55Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool case, 1 sanding pad, 5 sanding sheets eachgrit size 60, 80, 120, 180, 1 dust extraction device, 1 Sanding plate with holes, 5 sandingsheets perforated each grit size 60, 80, 120, 180, 1 of each M-CUT saw blade (form 138, 158),1 carbide file, 1 Universal E-CUT saw blade (44 mm), 1 HSS saw blade wood, 1 depth stop,1 carbide saw blade, 1 Stopper knife, 1 of each deck cutter blade (4+5 mm), 2 bristle fleeces,3 felt polishing padsEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Powerful oscillating motion(amplitude 2 x 2.0 degrees) for maximumwork progress. Electronic speed control Minimal dirt and dust <strong>FEIN</strong> high-power motor for extraordinaryperformanceOscillatingFor accessories, see page 251–256249
<strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong><strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Oscillator – 400 WFSC 2.0 QThe powerful oscillator with quick clamping system for interior fitting and renovation.Technical dataModelFSC 2.0 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 36 50Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong> in a plastic tool caseEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Hexagonal tool mounting for excellent transferof torque between machine and tool Powerful oscillating motion(amplitude 2 x 2.0 degrees) for maximumwork progress. Electronic speed control <strong>FEIN</strong> high-power motor for extraordinaryperformance Wide range of accessories available for allapplications.For accessories, see page 251–256250
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Accessories for interiorconstruction work with wood/repairing/replacing windowsE-CUT standard saw bladesCrossed toothing for all wood,plasterboard, and plastics jobs.Length 78 mm, form 123Width No. in packmm pcs Part number32 1 6 35 02 123 01 832 5 6 35 02 123 04 632 25 6 35 02 123 03 0Length 78 mm, form 124Width No. in packmm pcs Part number42 1 6 35 02 124 01 642 5 6 35 02 124 04 442 25 6 35 02 124 03 8Length 50 mm, form 135Width No. in packmm pcs Part number35 1 6 35 02 135 01 935 5 6 35 02 135 03 135 25 6 35 02 135 02 5Length 50 mm, form 136Length 50 mm, form 121Width No. in packmm pcs Part number55 1 6 35 02 121 01 155 5 6 35 02 121 04 955 25 6 35 02 121 03 3Length 50 mm, form 122Width No. in packmm pcs Part number65 1 6 35 02 122 01 465 5 6 35 02 122 04 265 25 6 35 02 122 03 6E-CUT universal saw bladesBi-metal teeth, cranked, also suitablefor radii, high speed cut, sheet metal(400 N/mm²) up to about 2 mm andplastics, aluminium profiles, copperpipes, wood, plasterboard, and almostall plastics.Length 60 mm, form 147Width No. in packmm pcs Part number28 1 6 35 02 147 01 528 5 6 35 02 147 02 128 25 6 35 02 147 03 7Length 78 mm, form 163Width No. in packmm pcs Part number42 1 6 35 02 163 01 042 5 6 35 02 163 02 042 25 6 35 02 163 03 0Length 50 mm, form 164Width No. in packmm pcs Part number35 1 6 35 02 164 01 035 5 6 35 02 164 02 035 25 6 35 02 164 03 0Length 50 mm, form 165Width No. in packmm pcs Part number65 1 6 35 02 165 01 065 5 6 35 02 165 02 065 25 6 35 02 165 03 0Depth stopDepth stop suitable for all E-CUT sawblades and round, non-cranked sawblades 80-100 mm in diameter.Saw bladesHSS, with fine teeth for precise cutting.Universal use on sheet metal of upto approx. 1 mm, can be doubled inplastics.Ø No. in packmm pcs Part number63 2 6 35 02 102 01 663 5 6 35 02 102 07 080 2 6 35 02 103 01 080 5 6 35 02 103 05 0HSS, cranked, countersunk clampingscrew for flush working.Ø No. in packmm pcs Part number85 1 6 35 02 145 01 885 5 6 35 02 145 02 0100 1 6 35 02 137 01 6100 5 6 35 02 137 02 0HSS saw blade woodIdeal for long, straight cuts and forcutting out laid parquet or laminateflooring.Without depth stopLength 60 mm, form 148ØNo. in packWidth No. in packmm pcs Part number65 1 6 35 02 136 01 265 5 6 35 02 136 03 465 25 6 35 02 136 02 8E-CUT precision saw bladesDouble-row original Japan toothing,for top-precision cuts, and cleancutting edges even freely by handLength 50 mm, form 119Width No. in packmm pcs Part number35 1 6 35 02 119 01 035 5 6 35 02 119 04 835 25 6 35 02 119 03 2Length 50 mm, form 120WidthNo. in packWidth No. in packmm pcs Part number44 1 6 35 02 148 01 344 5 6 35 02 148 02 944 25 6 35 02 148 03 5E-CUT long-life saw bladesBi-metallic teeth, stepped, high cuttingspeed. Extremely durable and robust.For hardwood, softwood and all otherwooden materials – including thosewith nails. Also perfectly suited toplastics and plasterboard.Length 78 mm, form 162Width No. in packmm pcs Part number32 1 6 35 02 162 01 032 5 6 35 02 162 02 032 25 6 35 02 162 03 0Part number 3 26 07 062 02 2M-CUT Saw BladeFor cuts, cut-outs, and grooves in sheetmetal, plastics, fibreglass, and carbonfibre-reinforced plastic; 2-pack.WideWidth Lengthmm mm Part number30 50 6 35 02 138 01 4NarrowWidth Lengthmm Part number10 50 6 35 02 158 01 0mm pcs Part number100 1 6 35 02 153 01 0With depth stopØ No. in packmm pcs Part number100 1 3 26 07 062 04 0Circular knifeHSS, crankedfor general cutting applications inleather, plastics foils, roofing cardboard,fly screens, etc. Pack of 1.ØmmPart number100 6 39 03 220 01 0Cutting pasteLubricating agents for working onsheet metals.Oscillatingmm pcs Part number45 1 6 35 02 120 01 245 5 6 35 02 120 04 045 25 6 35 02 120 03 4Part number 3 21 32 020 12 9251
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Cutting bladeMushroom-shaped, pack of 5,for cutting elastic silicon or acrylicconnecting joints.80 50 6 37 17 083 01 5100 50 6 37 17 084 01 3120 50 6 37 17 085 01 7150 50 6 37 17 087 01 4180 50 6 37 17 088 01 2220 50 6 37 17 089 01 6240 50 6 37 17 090 01 8Sanding pad set, perforatedFor sanding with dust extractor.2-pack.Carbide rasp, triangularFor rough sanding of filler, tileadhesives, concrete, stone and wood.For use with or without dustextractor.Standard version, edge length of80 mm.Part number 6 39 03 128 01 2Segment saw bladedepressed, for removing panes ofinsulating glass installed on a putty bed,pack of 2Set of sanding sheetsFor universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. Each with 10 sandingsheets, unperforated, with Velcrorapid attachment, grain 60, 80, 120,180, 240.No. in packpcsPart number2 6 38 06 136 02 9Sanding sheets, perforatedFor sanding with dust extractor. Foruniversal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. From grain 36 to 240.Part number 6 37 31 001 01 4Large version for particularly goodwork progress and efficient machiningof several square metres, edge length110 mm.Part number 6 39 03 166 01 6Part number 6 37 17 082 03 3Adapter for <strong>FEIN</strong> <strong>SUPERCUT</strong> withQuickINNeeded to hold accessories with an8-star holder (e.g. rasps, sanding andpolishing pads).Part number 6 37 33 005 01 0Sanding pad set, unperforatedFor sanding without extraction.2-pack.No. in packpcsPart number2 6 38 06 129 02 6Sanding sheetsUnperforated, with Velcro attachment.For universal application on nearly allsurfaces.Grain No. in packpcs Part number36 5 6 37 17 086 04 840 5 6 37 17 081 04 660 5 6 37 17 082 04 980 5 6 37 17 083 04 3100 5 6 37 17 084 04 1120 5 6 37 17 085 04 5150 5 6 37 17 087 04 2180 5 6 37 17 088 04 0220 5 6 37 17 089 04 4240 5 6 37 17 090 04 636 50 6 37 17 086 01 040 50 6 37 17 081 01 860 50 6 37 17 082 01 1Stone sanding setUniversal application in the fields ofstone processing and stone products.Consists of 5 of each sanding sheetgrades, without holes, grit 40, 80, 120,220, 320, 400, 600, 800, 1 sanding pad,without holes, with aluminium andplastic backing plate, 1 felt polishing pad.Part number 6 38 06 129 06 7Stone sanding sheetsSpecial for processing natural andartificial stone. In 8 steps for roughto finishing sanding.Grain No. in packpcs Part number40 50 6 37 17 120 01 480 50 6 37 17 121 01 3120 50 6 37 17 122 01 6220 50 6 37 17 123 01 0320 50 6 37 17 124 01 8400 50 6 37 17 125 01 2600 50 6 37 17 175 01 7800 50 6 37 17 176 01 0Dust extraction setOnly for the FSC 2.0 Q corded machineFor all sanding and rasping jobs withtriangular sanding pad and carbide rasp.incl. 2 sanding pads, perforated; 5 ofeach type of sanding sheet, perforated,grit 60, 80, and 120; 1 extractor hoodwith suction tube; 2 hose nozzles forhose connection Ø 27 and 32 mm plus2 adapters for connection to the mostcommon domestic vacuum cleaners.Part number 9 26 02 074 01 4Grain No. in packpcs Part number36 5 6 37 17 107 04 940 5 6 37 17 108 04 760 5 6 37 17 109 04 180 5 6 37 17 110 04 3100 5 6 37 17 111 04 2120 5 6 37 17 112 04 5150 5 6 37 17 113 04 9180 5 6 37 17 114 04 7220 5 6 37 17 115 04 1240 5 6 37 17 116 04 436 50 6 37 17 107 01 140 50 6 37 17 108 01 960 50 6 37 17 109 01 380 50 6 37 17 110 01 5100 50 6 37 17 111 01 4120 50 6 37 17 112 01 7150 50 6 37 17 113 01 1180 50 6 37 17 114 01 9220 50 6 37 17 115 01 3240 50 6 37 17 116 01 6Set of sanding sheets10 of each type of sanding sheet,perforated with Velcro rapidattachment, corundum,grit 60, 80, 120, 180, and 240.Part number 6 37 17 109 03 5<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.Part number 6 37 31 005 01 0Carbide rasp, finger-shapedFor rough sanding of filler, tileadhesives, concrete, stone and wood.The finger shape, coated on both sides,is especially well suited for artisticwork.Part number 6 37 31 002 01 7Carpenter set for FSC 2.0 QAdditional purchase for professionalset for interior construction work withwood, consisting of:1 HSS saw blade for wood (form 153);4 E-CUT long-life saw blades(form 162, 163 and 164, 165);4 E-CUT precision saw blades(form 119, 120 and 121, 122);2 E-CUT universal saw blades(form 147, 148); 1 depth stop;1 sanding pad; 5 each of sanding sheets,grain 80, 120, 180; 1 adapter and2 tensioning elementsPart number 6 39 03 167 66 0252
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Glazing set for FSC 2.0 QAdditional purchase for professionalset for repairing/replacing windows,consisting of: 1 HSS saw blade, stepped(form 137); 1 HSS saw blade for wood(form 153); 1 E-CUT long-life saw blade(form 163); 2 E-CUT universal sawblades (form 147, 148); 1 segment sawblade (form 166); 1 cutter blade,mushroom-shaped (form 128);1 depth stop; 1 sanding pad; 5 each ofsanding sheets, grain 80, 120, 180;1 adapter and 2 tensioning elementsAccessories for tile restoration/bathroom renovation/heating/sanitary installationCutting bladeMushroom-shaped, pack of 5,for cutting elastic silicon or acrylicconnecting joints.Segment bladeDiamond-coated, also for cornersand radii and for working withoutovercutting.Cutting line approx. 2.2 mm, standarddesign for all marble, epoxy resins andcement trass mortar.No. in packpcsPart number1 6 39 03 162 01 75 6 39 03 162 03 0Carbide segment bladeIn comparison with the diamond version,the price is lower and the servicelife shorter.For corners and radii and for workingwithout overcutting, cutting line approx.2.2 mm for all marble and epoxyresin joints.No. in packpcsPart number1 6 39 03 225 01 05 6 39 03 225 02 025 6 39 03 225 03 0Part number 6 39 03 167 67 0Part number 6 39 03 128 01 2Adapter for <strong>FEIN</strong> <strong>SUPERCUT</strong> withQuickINNeeded to hold accessories with an8-star holder (e.g. rasps, sanding andpolishing pads).Cutting line approx. 1,2 mm, forextremely narrow marble joints.Cutting depth max. 10 mm.Not suitable for epoxy resin or trasscement joints.For corners and radii and for workingwithout overcutting, extra thin version,cutting line approx. 1.2 mm, cuttingdepth max. 10 mm. Not suited to veryhard epoxy resin or cement joints.Cutting bladeFor cutting away panelled deck sealantmaterials quickly and safely. Also idealfor difficult areas such as cabins, rails,gunwales, cleats, and curves.Pack of 2Blade widthmmPart number3 6 39 03 183 01 94 6 39 03 184 01 75 6 39 03 185 01 16 6 39 03 186 01 4Set of felt polishing padsFor polishing metal parts, as well asfor polishing and decorative polishingof stone and stone products. Gelcoatlayers on boats can also be polished.Pack of 2.No. in packpcsPart number2 6 38 06 140 02 7InfotextBurnishing compounds for therespective material are availablefrom specialist retailers.Part number 6 37 33 005 01 0Dust extraction setOnly for the FSC 2.0 Q corded machineFor all sanding and rasping jobs withtriangular sanding pad and carbide rasp.incl. 2 sanding pads, perforated;5 of each type of sanding sheet,perforated, grit 60, 80, and 120;1 extractor hood with suction tube;2 hose nozzles for hose connectionØ 27 and 32 mm plus 2 adapters forconnection to the most commondomestic vacuum cleaners.Part number 9 26 02 074 01 4<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.No. in packpcsPart number1 6 39 03 196 01 35 6 39 03 196 02 0Diamond-coated saw bladeCutting line approx. 2.2 mm, standarddesign for all marble, epoxy resins andcement trass mortar.Ø No. in packmm pcs Part number80 1 6 35 02 115 01 180 5 6 35 02 115 03 0105 1 6 35 02 167 01 0105 5 6 35 02 167 02 0Cutting line approx. 1.2 mm forextremely thin marble mortar joints.Not suitable for epoxy resin andcement trass mortar.Ø No. in packmm pcs Part number80 1 6 35 02 116 01 480 5 6 35 02 116 02 0105 1 6 35 02 168 01 0105 5 6 35 02 168 02 0No. in packpcsPart number1 6 39 03 224 01 05 6 39 03 224 02 025 6 39 03 224 03 0Carbide saw bladeIn comparison with the diamondversion, the price is lower and theservice life shorter.Stepped, cutting line approx. 2.2 mm,standard for all marble, epoxy resinand concrete trass joints.Ø No. in packmm pcs Part number80 1 6 35 02 156 01 080 5 6 35 02 156 02 080 25 6 35 02 156 03 0105 1 6 35 02 172 01 0105 5 6 35 02 172 02 0Extra thin version, cutting line approx.1.2 mm, not suited to very hard epoxyresin or cement joints. Also suitedto reworking deck joints.Ø No. in packmm pcs Part number80 1 6 35 02 155 01 080 5 6 35 02 155 02 080 25 6 35 02 155 03 0105 1 6 35 02 173 01 0105 5 6 35 02 173 02 0Oscillating253
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Carbide rasp, triangularFor rough sanding of filler, tileadhesives, concrete, stone and wood.For use with or without dust extractor.Standard version, edge length of80 mm.Part number 6 37 31 001 01 4Large version for particularly goodwork progress and efficient machiningof several square metres, edge length110 mm.Segment bladeSegment form for V-cut from outsideand for cuts in corners, 2-packCut length Total lengthmm mm Part number30 73 6 39 03 132 01 0Cutting toolFor making grooves of 13 x 6.5 mm inrigid foam panels for electrical, wall andunderfloor heating. Pack of 2Device for dust extractFor jobs with diamond-coated tools;tool-free mount. Hose connectionØ 32 mm.Part number 9 26 02 084 01 0Bail handleTo reduce the vibrations and for betterhandling of the <strong>FEIN</strong> <strong>SUPERCUT</strong> duringlonger jobs. Can be used in connectionwith the dust extraction device9 26 02 084 01 0.SHK set for FSC 2.0 QAdditional purchase for professionalset for heating/sanitary installation,consisting of: 1 diamond-coatedsegment blade (form 162); 3 cut-outblades (12 mm, 13 mm, 22 mm);1 cutter blade, straight (form 116);2 E-CUT universal saw blades(form 147, 148); 1 stopper knife;1 carbide-coated rasp; 1 adapter and2 tensioning elementsPart number 6 39 03 167 59 0Accessories for renewinggrouting/jointsPart number 6 37 31 005 01 0Carbide rasp, finger-shapedFor rough sanding of filler, tileadhesives, concrete, stone and wood.The finger shape, coated on both sides,is especially well suited for artisticwork.Width Cutting Cuttingwidth depthmm mm mm Part number50 13 6,5 6 39 03 223 01 0For making grooves in rigid foampanels for electric cables up to 12 mmin diameter. Pack of 2Part number 3 21 19 116 01 1Cleaning blockRhombus for cleaning the carbide toolsand diamond-coated tools.Part number 6 37 19 007 01 0Cutting bladeStraight shape. Universal bladefor almost all expansion sealants.Pack of 5Part number 6 39 03 117 01 5Part number 6 37 31 002 01 7Scraper bladefor removing floor covering remains,underseal and residual bondingmaterial, etc., pack of 2Width Immersion Ømm mm Part number50 12 6 39 03 222 01 0For making grooves in rigid foampanels for 1/2 in and 3/3 in hot waterpipes and for empty pipes for electricalinstallation. Pack of 2Work glovesVibration-attenuating, certifiedaccording to EN 388/420,EN ISO 10819, EEC No. 0200,No. in pack 1 pairStraight, long, for very deep joints,pack of 5Part number 6 39 03 116 01 1Length No. in packmm pcs Part number50 2 6 39 03 206 01 868 2 6 39 03 227 01 0Cutting bladeStraight shape. Universal bladefor almost all expansion sealants.Pack of 5Part number 6 39 03 117 01 5Straight, long, for very deep joints,pack of 5Width Immersion Ømm mm Part number50 22 6 39 03 221 01 0Blade for 90° cut-out for bendingSchlüter Kerdi-Boards ® .Cutting depthmmPart number38 6 39 03 228 01 028 6 39 03 229 01 019 6 39 03 230 01 012,5 6 39 03 231 01 0SizePart number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5Tile laying setAdditional purchase for professionalset for tile restoration/bathroomrenovation, consisting of: 1 segmentblade, diamond-coated (form 162);1 carbide segment blade (thin)(form 224); 1 blade, mushroom-shaped(form 128); 1 stopper knife; 2 carbidecoatedrasps; 2 E-CUT universal sawblades (form 147, 148); 1 adapter and1 tensioning element.Segment bladeSegment form for V-cut from outsideand for cuts in corners, 2-packCut length Total lengthmm mm Part number30 73 6 39 03 132 01 0Device for dust extractFor jobs with diamond-coated tools;tool-free mount. Hose connectionØ 32 mm.Part number 6 39 03 167 58 0Part number 9 26 02 084 01 0Part number 6 39 03 116 01 1254
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Bail handleTo reduce the vibrations and for betterhandling of the <strong>FEIN</strong> <strong>SUPERCUT</strong> duringlonger jobs. Can be used in connectionwith the dust extraction device9 26 02 084 01 0.Part number 3 21 19 116 01 1Cleaning blockRhombus for cleaning the carbide toolsand diamond-coated tools.Part number 6 37 19 007 01 0Work glovesVibration-attenuating, certifiedaccording to EN 388/420,EN ISO 10819, EEC No. 0200,No. in pack 1 pairLength 50 mm, form 122Width No. in packmm pcs Part number65 1 6 35 02 122 01 465 5 6 35 02 122 04 265 25 6 35 02 122 03 6E-CUT universal saw bladesBi-metal teeth, cranked, also suitablefor radii, high speed cut, sheet metal(400 N/mm²) up to about 2 mm andplastics, aluminium profiles, copperpipes, wood, plasterboard, and almostall plastics.Length 60 mm, form 147Width No. in packmm pcs Part number28 1 6 35 02 147 01 528 5 6 35 02 147 02 128 25 6 35 02 147 03 7Length 50 mm, form 164Width No. in packmm pcs Part number35 1 6 35 02 164 01 035 5 6 35 02 164 02 035 25 6 35 02 164 03 0Length 50 mm, form 165Width No. in packmm pcs Part number65 1 6 35 02 165 01 065 5 6 35 02 165 02 065 25 6 35 02 165 03 0M-CUT Saw BladeFor cuts, cut-outs, and grooves in sheetmetal, plastics, fibreglass, and carbonfibre-reinforced plastic; 2-pack.WideHSS saw blade woodIdeal for long, straight cuts and forcutting out laid parquet or laminateflooring.Without depth stopØ No. in packmm pcs Part number100 1 6 35 02 153 01 0With depth stopØ No. in packmm pcs Part number100 1 3 26 07 062 04 0Sanding sheetsUnperforated, with Velcro attachment.For universal application on nearly allsurfaces.Grain No. in packpcs Part number36 5 6 37 17 086 04 840 5 6 37 17 081 04 660 5 6 37 17 082 04 980 5 6 37 17 083 04 3100 5 6 37 17 084 04 1120 5 6 37 17 085 04 5150 5 6 37 17 087 04 2180 5 6 37 17 088 04 0220 5 6 37 17 089 04 4240 5 6 37 17 090 04 636 50 6 37 17 086 01 040 50 6 37 17 081 01 860 50 6 37 17 082 01 180 50 6 37 17 083 01 5100 50 6 37 17 084 01 3120 50 6 37 17 085 01 7150 50 6 37 17 087 01 4180 50 6 37 17 088 01 2220 50 6 37 17 089 01 6240 50 6 37 17 090 01 8SizePart number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5Cleaning bladesStraight, diamond-coated, for cleaningmortar flanks before rejoiningNo. in packpcsPart number1 6 39 03 161 01 45 6 39 03 161 03 0Accessories for MarineE-CUT precision saw bladesDouble-row original Japan toothing,for top-precision cuts, and cleancutting edges even freely by handLength 50 mm, form 119Length 60 mm, form 148Width No. in packmm pcs Part number44 1 6 35 02 148 01 344 5 6 35 02 148 02 944 25 6 35 02 148 03 5E-CUT long-life saw bladesBi-metallic teeth, stepped, high cuttingspeed. Extremely durable and robust.For hardwood, softwood and all otherwooden materials – including thosewith nails. Also perfectly suited toplastics and plasterboard.Length 78 mm, form 162Width No. in packmm pcs Part number32 1 6 35 02 162 01 032 5 6 35 02 162 02 032 25 6 35 02 162 03 0Length 78 mm, form 163Width Lengthmm mm Part number30 50 6 35 02 138 01 4NarrowWidth Lengthmm mm Part number10 50 6 35 02 158 01 0Saw bladesHSS, with fine teeth for precise cutting.Universal use on sheet metal of upto approx. 1 mm, can be doubled inplastics.Ø No. in packmm pcs Part number63 2 6 35 02 102 01 680 2 6 35 02 103 01 063 2 6 35 02 102 01 663 5 6 35 02 102 07 080 2 6 35 02 103 01 080 5 6 35 02 103 05 0Set of sanding sheetsFor universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. Each with 10 sandingsheets, unperforated, with Velcrorapid attachment, grain 60, 80, 120,180, 240.OscillatingHSS, cranked, countersunk clampingscrew for flush working.Width No. in packmm pcs Part number35 1 6 35 02 119 01 035 5 6 35 02 119 04 835 25 6 35 02 119 03 2Width No. in packmm pcs Part number42 1 6 35 02 163 01 042 5 6 35 02 163 02 042 25 6 35 02 163 03 0Ø No. in packmm pcs Part number85 1 6 35 02 145 01 8100 1 6 35 02 137 01 685 1 6 35 02 145 01 885 5 6 35 02 145 02 0100 1 6 35 02 137 01 6100 5 6 35 02 137 02 0Part number 6 37 17 082 03 3255
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> <strong>CONSTRUCTION</strong>Sanding pad set, perforatedFor sanding with dust extractor.2-pack.No. in packpcsPart number2 6 38 06 136 02 9Sanding sheets, perforatedFor sanding with dust extractor.For universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. From grain 36 to 240.Grain No. in packpcs Part number36 5 6 37 17 107 04 940 5 6 37 17 108 04 760 5 6 37 17 109 04 180 5 6 37 17 110 04 3100 5 6 37 17 111 04 2120 5 6 37 17 112 04 5150 5 6 37 17 113 04 9180 5 6 37 17 114 04 7220 5 6 37 17 115 04 1240 5 6 37 17 116 04 436 50 6 37 17 107 01 140 50 6 37 17 108 01 960 50 6 37 17 109 01 380 50 6 37 17 110 01 5100 50 6 37 17 111 01 4120 50 6 37 17 112 01 7150 50 6 37 17 113 01 1180 50 6 37 17 114 01 9220 50 6 37 17 115 01 3240 50 6 37 17 116 01 6Set of sanding sheets10 of each type of sanding sheet,perforated with Velcro rapidattachment, corundum,grit 60, 80, 120, 180, and 240.Carbide saw bladeIn comparison with the diamondversion, the price is lower and theservice life shorter.Extra thin version, cutting lineapprox. 1.2 mm, not suited to veryhard epoxy resin or cement joints.Also suited to reworking deck joints.Ø No. in packmm pcs Part number80 1 6 35 02 155 01 0Carbide rasp, triangularFor rough sanding of filler, tileadhesives, concrete, stone and wood.For use with or without dust extractor.Standard version, edge length of80 mm.Part number 6 37 31 001 01 4Large version for particularly goodwork progress and efficient machiningof several square metres, edge length110 mm.Part number 6 37 31 005 01 0Carbide rasp, finger-shapedFor rough sanding of filler, tileadhesives, concrete, stone and wood.The finger shape, coated on both sides,is especially well suited for artisticwork.Carbide fileFor deburring and filing cut-outs infibreglass, CFRP, plastics and wood,length 50 mmNo. in packpcsPart number2 6 37 06 018 01 0Cutting bladeFor cutting away panelled deck sealantmaterials quickly and safely. Also idealfor difficult areas such as cabins, rails,gunwales, cleats, and curves.Pack of 2Blade widthmmPart number3 6 39 03 183 01 94 6 39 03 184 01 75 6 39 03 185 01 16 6 39 03 186 01 4Sanding pad set, plasticWith plastic backing plate to avoidscratch marks. Pack of 2.No. in packpcsPart number2 6 38 06 153 02 2Profile sanding setConsisting of 1 holder and 6 differentprofiles: 1 V-form for 90° angle,1 trapezium for tongue-and-grooveconnections, 1 for straight profiles,1 for convex forms (large), 1 each forconcave and convex forms (small),as well as 5 sanding sheets grit 80,120, and 180.Sandpaper for profile sanding setFor nearly all materials, e.g. wood,metal, lacquer and plastics. pack of 25.Grain No. in packpcs Part number80 25 6 37 17 217 01 6120 25 6 37 17 218 01 4180 25 6 37 17 219 01 8Bristle fleeceBristle fleece for cleaning boat decks orcleaning/polishing anti-slip structures.No. in packpcsPart number2 6 37 23 031 01 0Set of felt polishing padsFor polishing metal parts, as well asfor polishing and decorative polishingof stone and stone products. Gelcoatlayers on boats can also be polished.Pack of 2.No. in packpcsPart number2 6 38 06 140 02 7InfotextBurnishing compounds for therespective material are available fromspecialist retailers.Accessories for AFSC 18Battery packLi-ion 18 V, 2.4 Ah, with chargemonitoring displayPart number 6 37 31 002 01 7Part number 6 37 17 109 03 5<strong>FEIN</strong> “Dustex” vacuum cleanerPowerful wet and dry dust extractorfor connecting power tools whenworking in the workshop and forassembly work.You will find detailed informationabout the <strong>FEIN</strong> vacuum cleaner and“dust-free sanding” in the chapter onvacuum cleaners.Scraper bladefor removing floor covering remains,underseal and residual bondingmaterial, etc., pack of 2Length No. in packmm pcs Part number50 2 6 39 03 206 01 868 2 6 39 03 227 01 0Part number 6 38 06 183 01 3Part number 9 26 04 124 02 0Battery charger ALG 30Quick charger for <strong>FEIN</strong> Li-ion batteriesPart number 9 26 04 096 01 0256
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEFor maximum performance – when removing glass and inthe automotive workshop: <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE.As one of the world’s most successful power toolsfor removing rigidly bonded panes of auto glass, the<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE, the powerful system for vehiclerepairs, is virtually unbeatable in automotive work. To ensurecost-effectiveness, optimally compiled professional sets areavailable for auto glaziers’ workshops, vehicle workshops andcargo. The <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE is suitable for almostall vehicle types and is recommended by respected carmanufacturers. The easy-to-handle <strong>FEIN</strong> glass removalsystem offers key advantages. The original <strong>FEIN</strong> cutter bladesoffer optimum handling, tool life and cost effectiveness.<strong>FEIN</strong>’s many years of experience mean a high safety levelwith regard to glass and paintwork damage. In addition the<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE can also be used for sanding, sawing,cutting and polishing. For professional results in the automotiveworkshop.Oscillating257
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEBattery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEBattery-powered oscillatorAFSC 18The high-performance battery-powered oscillator with quick clamping system for the automotive industry.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 02Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 1 sharpening stone(6 37 19 010 01 4), 1 protective cover for tool changes, 2 battery packs (Li-ion),1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Same performance as the mains-powered tool,with outstanding work progress for professionaluse in a large number of tasks/sectors. Powerful 18 V Li-ion batteries with chargecontrol display. State-of-the-art Li-ion technology with individualcell monitoring. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. All <strong>FEIN</strong> <strong>SUPERCUT</strong> accessories can be used. Convenient QuickIN quick clamping system. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Factory-recommended by leading automobilemanufacturers. Continuously variable speed. Hexagonal tool holder for optimum torquetransfer. Supplied with training DVD.For accessories, see page 266–268258
Battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AutomotiveBattery-powered<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEBattery-powered oscillator<strong>FEIN</strong> professional set for vehicle glazingThe powerful system for vehicle repairs with special accessories for quick and safe removal of vehicle windows.Technical dataModel AFSC 18Battery voltage V 18Battery capacity Ah 2,4Oscillations rpm 11 000-18 500Weight with battery kg 2,0Tool HolderQuickINPart number 7 136 02 56Price includes1 battery-powered <strong>FEIN</strong> <strong>SUPERCUT</strong> AFSC 18 in plastic tool case, 3 L-shaped cutter blades,toothed (form 207), 2 L-shaped cutter blades, toothed (form 208), 1 L-shaped cutter blade,toothed (form 209), 1 each U-shaped cutter blade, reinforced design (forms 157 and 111),2 U-shaped cutter blades, reinforced design, toothed (form 212), 1 Straight cutter blade,Z-bend, with adjustable roller stop (form 143), 1 Straight cutter blade, Z-bend, toothed(form 081), 1 protective cover for tool changes, 1 sharpening stone (6 37 19 010 01 4),2 battery packs (Li-ion), 1 battery chargerEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits High-performance battery-powered <strong>SUPERCUT</strong>developed specially for use in vehicle glazing. Complete set in high-quality tool case with thekey accessories for removing the most commonvehicle windscreens. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Same performance as the mains-powered tool. State-of-the-art Li-ion technology with individualcell monitoring. Powerful 18 V Li-ion batteries with chargecontrol display. Quick charger with 25-30 minutes of charge timefor continuous working without interruption. Outstanding <strong>FEIN</strong> quality and stability. Designed for continuous use and high loads. Hexagonal tool holder for optimum torquetransfer. Long service lifes of the cutter blades. High safety level with L-shaped blades. Other cutter blades available as accessories. Supplied with training DVD.OscillatingFor accessories, see page 266–268259
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – 400 W<strong>FEIN</strong> professional set for automotive workshopsThe powerful system for vehicle repairs with special accessories for versatile use in the automotive workshop.Technical dataModelFSC 1.6 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 42 55Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> FSC 1.6 Q in plastic tool case, 2 U-shaped cutter blades, short side(form 076), 2 U-shaped cutter blades, short side (1x form 079 and 1x form 101),2 L-shaped cutter blades, toothed (form 207), 1 L-shaped cutter blade, toothed (form 208),1 U-shaped cutter blade, reinforced (form 157), 1 Straight cutter blade, Z-bend, with adjustableroller stop (form 143), 1 Spade-shaped scraper knife, with scratch-protective coating(form 129), 1 HSS saw blade (Ø 80 mm), 1 protective cover for tool changes, 1 stopperknife for removing underseal, 1 sharpening stone (6 37 19 010 01 4), 1 training DVDEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Can be used for windscreens, side and rearglass panes. Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. High safety level with L-shaped blades. Other cutter blades available as accessories. Supplied with training DVD.For accessories, see page 266–268260
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – 400 W<strong>FEIN</strong> professional set for vehicle glazingThe powerful system for vehicle repairs with special accessories for quick and safe removal of vehicle windows.Technical dataModelFSC 1.6 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 42 56Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> FSC 1.6 Q in plastic tool case, 3 L-shaped cutter blades, toothed (form 207),2 L-shaped cutter blades, toothed (form 208), 1 L-shaped cutter blade, toothed (form 209),1 each U-shaped cutter blade, reinforced design (forms 157 and 111), 2 U-shaped cutter blades,reinforced design, toothed (form 212), 1 Straight cutter blade, Z-bend, with adjustable rollerstop (form 143), 1 Straight cutter blade, Z-bend, toothed (form 081), 1 protective cover fortool changes, 1 sharpening stone (6 37 19 010 01 4), 1 training DVD<strong>FEIN</strong> benefits Optimally compiled set for removing the mostcommon types of vehicle windscreen. Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Long service lifes of the cutter blades. High safety level with L-shaped blades. Other cutter blades available as accessories. Supplied with training DVD.Emission values (sound/vibration) can be found at www.fein.com/vibrationFor accessories, see page 266–268Oscillating261
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – 400 W<strong>FEIN</strong> professional set for cargoThe powerful system for vehicle repairs with special accessories for quick and professional removal of bonded windows on buses,lorries and rail vehicles.Technical dataModelFSC 1.6 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 42 57Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> FSC 1.6 Q in plastic tool case, 2 Straight cutter blades, toothed (form 073),2 straight cutter blades, Z-bend, toothed (form 081), 1 Hook-shaped cutter blade, toothed(form 217), 1 Straight cutter blades, curved shape, Z-bend (form 072), 2 L-shaped cutterblades, toothed (form 207), 1 L-shaped cutter blade, toothed (form 209), 1 U-shaped cutterblade, toothed (form 212), 1 Spade-shaped scraper knife, with scratch-protective coating(form 105), 1 traction cable with fastening, 1 sharpening stone (6 37 19 010 01 4), 1 protectivecover for tool changes, 1 training DVD<strong>FEIN</strong> benefits Sufficient capacity reserves for extreme loads inthe cargo sector. Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Long service lifes of the cutter blades. Toothed blade designed specially for high modulepolyurethane adhesives. Other cutter blades available as accessories. Supplied with training DVD.Emission values (sound/vibration) can be found at www.fein.com/vibrationFor accessories, see page 266–268262
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – 400 WFSC 1.6 QThe powerful oscillator with quick clamping system for the vehicle industry.Technical dataModelFSC 1.6 QInput W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,45Tool HolderQuickINPart number 7 236 42 50Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> FSC 1.6 Q in plastic tool case, 1 protective cover for tool changes,1 sharpening stone (6 37 19 010 01 4), 1 training DVDEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal for removing bonded panes and carryingout vehicle repairs. Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. convenient accessory changes without the needfor extra tooling with the QuickIN clampingsystem. Factory-recommended by leading automobilemanufacturers. Continuously variable speed. Hexagonal tool mounting with frictionalconnection between machine and tool. <strong>FEIN</strong> high-power motor. Carbon brushes with self cut-off function. Supplied with training DVD.OscillatingFor accessories, see page 266–268263
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – 400 WFSC 1.6The powerful oscillator for the vehicle industry.Technical dataModel FSC 1.6Input W 400Output W 220Oscillations rpm 11 000-18 500Cable with plug m 5Weight according to EPTA kg 1,25Part number 7 236 31 50Price includes1 <strong>FEIN</strong> <strong>SUPERCUT</strong> FSC 1.6, 1 plastic carrying case, 1 sharpening stone (6 37 19 010 01 4),1 Mounting bolt (3 30 01 039 01 7), 1 key, 1 training DVDEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal for removing bonded panes and carryingout vehicle repairs. Maximum quality and stability thanks to the useof ball / needle roller bearings and a motor andgearbox designed for continuous use at highload. Large selection of accessories for cutting, sawing,grinding and scraping. Factory-recommended by respected vehiclemanufacturers. Continuously variable speed. Hexagonal tool mounting with frictionalconnection between machine and tool. <strong>FEIN</strong> high-power motor. Carbon brushes with self cut-off function. Supplied with training DVD.For accessories, see page 266–268264
<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEOscillator – compressed airMOtlx 6-25The powerful pneumatic oscillator for cargo.Technical dataModel MOtlx 6-25Operating pressure bar 6,3Air consumption m³/min 0,60Oscillations rpm 20 000Hose size Ø mm 8Weight according to EPTA kg 0,9Part number 7 536 03Price includes1 pneumatic <strong>FEIN</strong> <strong>SUPERCUT</strong> MOtlx 6-25, 1 plastic carrying case, 2 keysEmission values (sound/vibration) can be found at www.fein.com/vibration<strong>FEIN</strong> benefits Ideal for removing bonded panes from lorries,buses and rail vehicles. Available with a comprehensive rangeof accessories for professional use in manyindustry sectors. Powerful oscillating motion with amplitudeof 2 x 1.6 degrees for maximum work progress. No air leaks, no oil misting in working area. Small size. Hexagonal tool mounting. Supplied with inlet and outlet air hose.For accessories, see page 266–268Oscillating265
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEGeneral accessoriesProtective coverFor safe tool changes for <strong>SUPERCUT</strong> withQuickIN when opening and closing theclamping lever.Saw bladesHSS, with fine teeth for precise cutting.Universal use on sheet metal of up toapprox. 1 mm, can be doubled in plastics.E-CUT universal saw bladesBi-metal teeth, cranked, also suitablefor radii, high speed cut, sheet metal(400 N/mm²) up to about 2 mm andplastics, aluminium profiles, copperpipes, wood, plasterboard, and almostall plastics.Length 60 mm, form 147Adapter for <strong>FEIN</strong> <strong>SUPERCUT</strong>without QuickINNeeded to hold accessories with an8-star holder (e.g. rasps, sanding andpolishing pads).Part number 3 21 74 011 00 0Sharpening stoneFor sharpening blades before useto produce an optimum cut.Ø No. in packmm pcs Part number63 2 6 35 02 102 01 680 2 6 35 02 103 01 0 63 2 6 35 02 102 01 663 5 6 35 02 102 07 080 2 6 35 02 103 01 080 5 6 35 02 103 05 0Width No. in packmm pcs Part number28 1 6 35 02 147 01 528 5 6 35 02 147 02 1Length 60 mm, form 148Part number 3 06 05 114 01 1Adapter for <strong>FEIN</strong> <strong>SUPERCUT</strong>with QuickINNeeded to hold accessories with an8-star holder (e.g. rasps, sanding andpolishing pads).Part number 6 37 19 010 01 4Cutting pasteLubricating agents for workingon sheet metals.HSS, cranked, countersunk clampingscrew for flush working.Width No. in packmm pcs Part number44 1 6 35 02 148 01 344 5 6 35 02 148 02 9Part number 6 37 33 005 01 0Part number 3 21 32 020 12 9Work glovesVibration-attenuating, certified accordingto EN 388/420, EN ISO 10819,EEC No. 0200, No. in pack 1 pairØ No. in packmm pcs Part number85 1 6 35 02 145 01 8100 1 6 35 02 137 01 685 1 6 35 02 145 01 885 5 6 35 02 145 02 0100 1 6 35 02 137 01 6100 5 6 35 02 137 02 0Cutting pasteLubricating agents for working onsheet metals.Part number 3 21 32 020 12 9Sanding pad set, unperforatedFor sanding without extraction. 2-pack.No. in packpcsPart number2 6 38 06 129 02 6SizePart number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5Automotive workshop accessoriesM-CUT Saw BladeFor cuts, cut-outs, and grooves in sheetmetal, plastics, fibreglass, and carbonfibre-reinforced plastic; 2-pack.WideWidth Lengthmm mm Part number30 50 6 35 02 138 01 4Straight formsuitable for round grooves in plastics.toothed, 2-pack.Cut length Total lengthmm mm Part number35 56 6 39 03 073 01 1Set of sanding sheetsFor universal application on nearly allsurfaces. Corundum abrasive grain andfull resin bond guarantee high abrasionperformance. Each with 10 sandingsheets, unperforated, with Velcrorapid attachment, grain 60, 80, 120,180, 240.Removal Devicefor dismantling rear and side glass paneswithout damaging the vulcanised sealinglip. For VW-Golf III and VW Polo after1995, Lupo, Passat V estate car, tailgate.Consisting of 1 sliding guide and 2 cutterblades (form 197 a. 113).Part number 9 06 07 003 01 3Straight formcurved, Z-bend, as subsequent orderfor removal device 9 06 07 001 01 6,2-pack.NarrowWidth Lengthmm mm Part number10 50 6 35 02 158 01 0Carbide fileFor deburring and filing cut-outs infibreglass, CFRP, plastics and wood,length 50 mmNo. in packpcsPart number2 6 37 06 018 01 0Suitable for removal of chassisattachment parts.Z-bend, toothed, 2-pack.Cut length Total lengthmm mm Part number60 120 6 39 03 081 01 3Scraper bladefor removing floor covering remains,underseal and residual bondingmaterial, etc., pack of 1Part number 6 37 17 082 03 3Infotext<strong>FEIN</strong> has a comprehensive range ofsand papers. You can get detailedinformation from your local <strong>FEIN</strong>dealer.Cutting bladeMushroom-shaped, pack of 5, forcutting elastic silicon or acrylicconnecting joints.Part number 6 39 03 128 01 2LengthNo. in packPart number 6 39 03 197 01 7mm pcs Part number50 2 6 39 03 206 01 868 2 6 39 03 227 01 0266
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVE<strong>FEIN</strong> accessories for removingresidual bonding beadsScraper knifeSpade-shaped, with scratch-protectivecoating, 2-pack.Vehicle glazing accessoriesU-shapedIdeal for removing glass from underthe bonnet.short side, 2-packL-shapedtoothed, 2-pack.Z-bend, with rigid depth stop,2-pack.Cut lengthCut length Total lengthCut length Total lengthmm mm Part number12 64 6 39 03 129 05 018 65 6 39 03 146 01 825 64 6 39 03 105 01 9with cross cutter and scratch protectivecoating on front limit stop, 2-pack.Cutting widthmmPart number13 6 39 03 113 01 625 6 39 03 131 01 7Cut lengthmmPart number10 6 39 03 083 01 016 6 39 03 095 01 116 6 39 03 108 01 418 6 39 03 087 01 919,5 6 39 03 118 01 322 6 39 03 115 01 824 6 39 03 076 01 628 6 39 03 163 01 132 6 39 03 147 01 236 6 39 03 079 01 240 6 39 03 110 01 060 6 39 03 101 01 070 6 39 03 155 01 4long side, 2-packmmPart number19 6 39 03 208 01 025,4 6 39 03 207 01 238 6 39 03 209 01 4Straight formPack of 2Cut length Total lengthmm mm Part number26 56 6 39 03 121 01 840 90 6 39 03 176 01 535 145 6 39 03 194 01 6Z-bend, 2-pack.mm mm Part number16 120 6 39 03 099 01 058 125 6 39 03 097 01 8Z-bend, with adjustable depth stop,2-packCut length Total lengthmm mm Part number16-43 100 6 39 03 143 01 318-39 100 6 39 03 170 01 420-35 100 6 39 03 198 01 560-76 120 6 39 03 169 01 2flat, with adjustable depth stop,2-pack.with cross cutter, 2-pack.Cut length Total lengthCutting widthmmPart number13 6 39 03 144 01 1Scraper knife setconsisting of: 1 each of spade-shapedscraper knife, with scratch-protectivecoating (forms 129/105).Cut lengthmmPart number18 6 39 03 127 01 432 6 39 03 114 01 432 6 39 03 191 01 145 6 39 03 154 01 052 6 39 03 153 01 260 6 39 03 107 01 6reinforced design, 2-packCut length Total lengthmm mm Part number19 68 6 39 03 122 01 118 84 6 39 03 181 01 223 65 6 39 03 173 01 025 65 6 39 03 124 01 327 85 6 39 03 174 01 832 110 6 39 03 123 01 570 120 6 39 03 171 01 3curved, 2-packmm mm Part number42-60 145 6 39 03 182 01 5Z-bend, bent with rigid depth stop,2-pack.Cut length Total lengthmm mm Part number54 120 6 39 03 160 01 5OscillatingPart number 6 39 03 129 01 6consisting of: 1 each of scraper knifewith cross cutter and scratch protectivecoating on front limit stop(form 113/131).Cut lengthmmPart number60 6 39 03 157 01 195 6 39 03 111 01 9reinforced design, toothed, 2-pack.Cut length Total lengthmm mm Part number14 65 6 39 03 120 01 916 75 6 39 03 104 01 535 75 6 39 03 103 01 735 75 6 39 03 109 01 835 75 6 39 03 164 01 935 75 6 39 03 172 01 6curved, Z-bend, 2-packCurved formZ-bend, with rigid depth stop, 2-pack.Cut length Total lengthmm mm Part number14 80 6 39 03 082 01 616 80 6 39 03 133 01 439 85 6 39 03 152 01 8Part number 6 39 03 113 02 2Cut lengthmmPart number19 6 39 03 210 01 625,5 6 39 03 211 01 538 6 39 03 212 01 8Cut length Total lengthmm mm Part number45 120 6 39 03 168 01 870 120 6 39 03 125 01 7267
Genuine <strong>FEIN</strong> accessories for <strong>FEIN</strong> <strong>SUPERCUT</strong> AUTOMOTIVEZ-bend, with adjustable depth stop,2-packCut length Total lengthmm mm Part number32-46 110 6 39 03 195 01 0Cargo accessoriesL-shapedtoothed, 2-pack.Angle cutter, 2-pack.Cut length Total lengthmm mm Part number65/8 85 6 39 03 177 01 935/20 83 6 39 03 203 01 3Curved formZ-bend, 2-pack.Traction cablewith grip. Use is recommended whencutting out from outside with L-shapedor hook-shaped cutter blade. Easierwork and less effort when cutting outglass panes from problem spots onbuses, commercial vehicles, trams andlocomotives.Part number 9 26 02 030 01 4Automobile workshop accessories setConsisting of: 2 U-shaped cutterblades, short side (form 076);2 U-shaped cutter blades, short side(1x form 079 and 1x form 101);2 L-shaped cutter blades, toothed(form 207); 1 L-shaped cutter blade,toothed (form 208); 1 U-shaped cutterblade, reinforced (form 157); 1 straightcutter blade, Z-bend, with adjustablestop roller (form 143); 1 shovel-shapedscraper blade, with scrape protectioncoating (form 129); 1 stopper knife;1 HSS saw blade (Ø 80 mm).Cut length Total lengthWork glovesVibration-attenuating, certifiedaccording to EN 388/420,EN ISO 10819, EEC No. 0200,No. in pack 1 pairCut lengthmmPart numbermm mm Part number45 80 6 39 03 072 01 7Part number 6 39 03 167 25 725,4 6 39 03 207 01 238 6 39 03 209 01 4Straight formsuitable for round grooves in plastics.toothed, 2-pack.Cut length Total lengthmm mm Part number35 56 6 39 03 073 01 1U-shapedwith elongated traverse, 2-pack.Cut lengthmmPart number40 6 39 03 156 01 7Hook-shapedtoothed, 2-pack.SizePart number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5Bail handleTo reduce the vibrations and for betterhandling of the <strong>FEIN</strong> <strong>SUPERCUT</strong> duringlonger jobs. Can be used in connectionwith the dust extraction device9 26 02 084 01 0.Accessory set for cargoSubsequent order to Professionalset Cargo consisting of: 2 straightcutter blades, toothed (form 073),1 straight cutter blade, Z-bend,toothed (form 081), 1 hook-shapedcutter blade, toothed (form 217),1 curved cutter blade, Z-bend,(form 072), 1 each of L-shaped cutterblade, toothed (forms 207 and 209),1 spade-shaped scraper knife, withscratch-protective coating (form 105),1 traction cable, 1 depth stopSuitable for removal of chassisattachment parts.Z-bend, toothed, 2-pack.Cut lengthmmPart numberPart number 3 21 19 116 01 138 6 39 03 217 01 1Accessory setsPart number 6 39 03 167 32 0Cut length Total lengthmm mm Part number60 120 6 39 03 081 01 3Z-bend, 2-pack.Cut length Total lengthmm mm Part number60 120 6 39 03 216 01 7Segment bladeSegment form for V-cut from outsideand for cuts in corners, 2-packCut length Total lengthmm mm Part number30 73 6 39 03 132 01 0Automobile glazier accessory setConsisting of: 3 L-shaped cutter blades,toothed (form 207); 2 L-shapedcutter blades, toothed (form 208);1 L-shaped cutter blade, toothed(form 209); 1 each of U-shaped cutterblade, reinforced version (form 157and 111); 2 U-shaped cutter blades,reinforced version, toothed(form 212); 1 straight cutter blade,Z-bend with adjustable stop roller(form 143); 1 straight cutter blade,Z-bend, toothed (form 081).Accessories for AFSC 18Battery packLi-ion 18 V, 2.4 Ah, with chargemonitoring displayPart number 9 26 04 124 02 0Battery charger ALG 30Quick charger for <strong>FEIN</strong> Li-ion batteriesPart number 6 39 03 167 38 3Part number 9 26 04 096 01 0268
Oscillating<strong>Ambitex</strong>Representações, Importações eExportações, Lda.Vale de Cambra - PortugalTel. +351 256 472 352Fax +351 256 425 938geral@ambitex.ptwww.ambitex.pt269
Change language