Catalogue 2010 Edition 8 - MPL-Tuningparts

Slipper clutch type Eco-I/ Eco-IIFor all Ducati models with dry clutch except 1098/1198Initially designed for racing applications, these specially coated clutches made of high-strengthairplane aluminum are now increasingly used on the road. They preventthe rear wheel from blocking when quickly changing to a lower gear. The slipper clutch providesoptimum safety especially when driving before and in curves. Due to the high weight reductionwhen compared to the original clutch, the bike becomes clearly more agile and peppy. TheType Eco-II uses a pressure plate with internal ventilation. These Eco-series clutches areequipped with aluminum stay bolts. Installation manual is provided. All current clutch liningscan be used.Eco-IEco-I with all add-on parts without basketThe Eco-I clutch can besupplied with a blackpressure plate upon request.Please specify whenordering!The Eco-II clutch can besupplied also with an openred or black pressure plateupon request (Pic. below).Please specify when ordering!Slipper clutch type Typ Eco-I/ Eco-IIEco-I without basket with all add-on partsEco-II without basket with all add-on partsSpring for racing adjustmentEco-IIEco-II with all add-on parts without basketOrder numberMPL-001-05-00SMPL-001-06-00SMPL-001-01-09RPrice in Euro649,00699,0039,00Overheating of the center spring is safely prevented by ventilation through the pressure plate,ensuring continuous operation even under extremely tough conditions. Drivers canselect between 2 possibilities settings. The default setting has a release torque of approx. 45Nm while the racing setting for ambitious race drivers releases at approx. 62 Nm.RACE AND STREET PARTSOpen pressure plate, also available in blackAll clutches are supplied in a suitcasewww.mpl-tuningparts.de