Catalog 330 - Norton TORQ Paint System with Spillgard

More documents

Recommendations

Info

$Bear-Tex Scuff Pads and Discs 8410 - Norton$

Norton Torq XXXXXX paint systemWith SpillGard TECHNOLOGYPatenteddesignUnitized constructionthat will not leakFresh set ofthreads witheach unitFEATURES❚❚Unitized construction❚❚Disposable❚❚Plastic components❚❚Valve with actuatorBENEFITS❚❚Will not leak❚❚Can get into tight spots at any angle❚❚Can store unused paint❚❚Can dispose of easily in accordancewith local regulations❚❚New unit every time so no gunkedup paint cup from repeated use❚❚Will not rust❚❚Can be used with waterborne andsolvent based paints❚❚Will not leak❚❚Paint only flows when attached tothe gunHad your fill of spills?The valve system, used with the Norton actuated adapter, releases paint only when attached to the gun. The self-sealing,spring-loaded valve eliminates the need for plugs for transporting, storing or shaking. The unitized lid/liner assemblyis guaranteed never to come apart so you avoid the hazard and mess of spilled paint. No matter how you handle it, theunitized leak-proof lid/liner assembly is guaranteed to remain securely sealed during disposal or storage.SpillGard TECHNOLOGY❚❚Triple seal protection❚❚Unitized lid/liner❚❚Quick-connect lid❚❚Self-sealing valveA notch above the rest❚❚Actuated adapter❚❚Extended filter area and space between tower andfilter for optimal flowWhen you twist the quick-connect, self-sealing unitized system onto the adapter, you can feel it engage and lock intothe notches on the valve and lid. This tactile information lets you know that all seals are engaged, the valve has beenopened, and you are ready to paint.❚❚Notches line up and provide tactile feedback to feel the unit engage❚❚Self-sealing, spring-loaded valve is activated by the actuator in the adapterwww.nortonautomotive.com36
norton Torq paint systemwith SpillGard TECHNOLOGYEfficient AssemblyThe Norton Torq Paint System with SpillGard eliminates the problem of gunked up threads because each unit comes with a fresh set of threads. The onlyreusable component to keep track of is the hard mixing cup with pre-printed measurements, so there are no inserts to keep track of either. The unitized lid/linerassembly is guaranteed not to come apart during disposal or storage which eliminates the hazard and mess of spilled paint. And, the self-sealing lid keeps anyremaining paint fresh for later use.No matter how you handle it, the unitized leak-proof lid/liner assembly is guaranteed to remain securely sealed. We’ve sealed the deal on ease and efficiencywhen it comes to disposable paint cups.Thread the Norton adapter to thespray gun.Seat the ring into the reusable mixing cup.Insert the liner into the ring.Load the paint by weight or by using thepre-printed mixing ratio scales on thereusable mixing cup.Mix the paint by stirring (if not using amechanical shaker) and clean the liner/flange area of any spilled paint beforeattaching the lid.Seat the lid onto ring and rotate the lidto attach:A 1/4 turn counter-clockwise until youhear a “click”B Then rotate lid clockwise until tight*The tower has a self-sealing valve; so, no plug is needed.If using a mechanical shaker, add theshaker cap and shake the paint.After shaking, check the lid and tightenif needed.Lift the unitized system out of the reusablemixing cup.Turn the unitized system upside downand screw the lid assembly into theadapter (clockwise) until you feel andhear it click/lock.Connect the air line to the gun, adjust thespray pattern and you’re ready to spray.NOTE: With solvent based paints, oncethe cup is attached to the gun, invertand purge some air out of the liner torelieve pressure.After you are done spraying, disconnectthe air hose, turn the gun upside downand pull the trigger to purge the gun ofany remaining paint.Twist the unit clockwise to release the unitfrom the adapter for storage for disposal.* Please consult your local and state laws forproper disposalwww.nortonautomotive.com37
Page 1: Norton Torq paint systemXXXXX With
Page 5: norton Torq paint systemwith SpillG

Catalog 330 - Norton TORQ Paint System with Spillgard

Create successful ePaper yourself

Delete template?

Save as template?