2-CIRCUIT MONORAIL - LBL Lighting

2-Circuit Monorail2-circuit monorailHand-bendable, field-cuttable 2-Circuit Monorail is rated for300 watts per circuit at 12 volts. Each piece of rail is shippedwith conductive connectors to join rail pieces end to end. Orderadditional connectors if cutting and rejoining rails.BZ bronzeSC satin nickelmodel finish lengthRAIL-ST- SC 96-248-2 48" long96-2 96" longbronzesatin nickel24" diameter circle 48" diameter circle soft curve1⁄3 Round, Radius 12" . Order three pieces tocreate a 24" diameter circle.20.5" 1/3 Round Curve.1⁄3 Round, Radius 24" . Order three pieces tocreate a 48" diameter circle.40.5" 1/3 Round Curve.78" Diameter, 1⁄5 Round, Radius 39" . Orderfive pieces to create a 78" diameter circle.46" 1/5 Round Curve.6"152 mm21"533 mm12"305 mm7"178 mm42" / 1067 mm 46" / 1168 mmmodelRAILCV3-BZ62.5-2 bronzeSC62.5-2 satin nickelfinishSC62.5-2modelRAILCV2-BZ125-2 bronzeSC125-2 satin nickelfinishSC125-2modelRAILCV1-BZ117-2 bronzeSC117-2 satin nickelfinishSC117-2straight conductiveStraight conductive connectors join sections of 2-Circuit Monorailtogether. (Set of three.) Included with each piece of rail.straight isolatingStraight isolating connectors join sections of rail and isolate one powered runfrom another. (Set of three.) These are typically used to separate one circuit fromthe other circuit when using surface or remote dual-feed transformers and toseparate multiple transformers on a continuous run. Included with dual-feedsurface transformers and power feed canopies. (See pp. 267-268.)Straight Conductive (Set of three)modelBZ-M-2 bronzeSC-M-2 satin nickelfinishSCONNECTOR SC-M-2ISOCONNECTORCL-M-2Straight Isolating (Pair)2-CIRCUIT MONORAIL262