11.07.2015 Views

[16/01/12]File size - Building Products Index

[16/01/12]File size - Building Products Index

[16/01/12]File size - Building Products Index

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Product GuideConcealed cisternsSound insulationConcealed cisternsConcealed cisternsConcealed dual flush cistern UP320 forSigma flush plates1005741R 1 /2<strong>16</strong>-20 5<strong>12</strong> 2-9100Application• For wall-hung WC and wall-hung bidet• For sanitaryware with fixing centres 180 mm or 230 mm• For decoupling solid-borne noise with WC and bidet• Insulation to be trimmed after pan fixedCharacteristics•WhiteProduct DetailsProduct materialMaterial thicknessAdditional Note2 acoustic insulation sleevesOrdering InformationArticle no. PU1 PU2 PU4156.050.00.1 1 10 200PE expanded6 mmApplication• For concealed installation• For back to wall floor-standing WCs84 5 23 55110836 5104 52313 50030Characteristics• Concealed cistern fully insulated against condensation• Front actuation only• Protection cover for service opening can be mounted without toolsand cut to length• Dual flush with Sigma60, Sigma50, Sigma20, Samba or Bolero flushplates• Dual flush with dual flush HyTouch pneumatic and mechanical buttons• Single flush with Sigma10, Rumba, Mambo or Tango flush plates• Single flush with HyTronic infra-red flush or HyTouch pneumaticbuttons• Flushing unit for dual flush and single flush• Adjustable flushing volume• Water supply connection at centre back or at the top• Flush bend has maximum 8 cm adjustment. Flush can be cut down bymaximum of 8 cm• Installation height 1080 mm (can be cut down, depending on the WCpan performance)• Installation depth adjustable, <strong>16</strong>0 - 205 mm• Fastening bracket adjustable in depth• Cistern can be reversed to give access from behind in a duct situationwhen flushed with HyTouch pneumatic buttons or HyTronic sensorflush• Flush valve features 6l and 4.5l flush settings to enable either a 6l and3l flush or a 4.5l and 3l flush. For flush volumes of 4l and 2l a low flushbeaker is required (241.894.00.1)Product DetailsFlow pressure range0.1–10 barOperating temperature water max. 25 °CFlush volume small range3–4 lFlush volume factory setting5.8 and 3 lAdditional NoteWater supply connection R 1/2" with integrated angle stop valve;Protection housing for service opening; Flush pipe ø 45 mm; Fasteningfor flush bend; Protection plug for flush pipe; 2 slotted flat irons; 2fastening brackets, pre-mounted; Fastening materialExcluded: Flush plateOrdering InformationArticle no. PU1 PU4109.309.00.5 1 20Product and Installation Guide Washroom & Bathroom 2<strong>01</strong>1 9

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!