GCP Sharp Shooter Feed Drill Catalog - Pneumatic Tools Online

Part Number (Motor)Data at 6.3 bar (91 psi)MaxOutputSpeed at Max OutputTechnical DataTorque at Max OutputFreeSpeedOutputAir Cons. at MaxOutputkW HP rpm Nm ft-lbs rpm l/s cfmGLZB33LA033-12 0.39 0.52 1460 2.6 1.9 3100 8.3 17.6GLZB33LA026-12 0.39 0.52 1180 3.2 2.3 2500 8.3 17.6GLZB33LA013-12 0.39 0.52 580 6.3 4.6 1230 8.3 17.6GLZB33LA007-12 0.39 0.52 320 11.3 8.4 680 8.3 17.6GLZB42LA040-12 0.65 0.87 2000 3.0 2.2 4000 13 28GLZB42LA025-12 0.65 0.87 1200 5.0 3.7 2400 13 28GLZB42LA015-12 0.65 0.87 730 8.4 6.2 1400 13 28GLZB42LA010-12 0.65 0.87 460 13.0 9.6 900 13 28GLZB42LA005-12 0.65 0.87 280 22.0 16.0 550 13 28Drill Unit Thrust 73 kg-fDrill Unit Thrust 161 lbs-fReliability through quality and rigidity.The Sharp Shooter drill unit has been tested for over one million cycles without lubrication and without any failures. After the testingwas completed the components were removed and disassembled. All components showed minimal wear.WarningThis tool and its clamping devices are to be used as an interior component of industrial tooling only, and must be safeguarded,controlled and operated in accordance with all applicable OSHA and ANSI standards to insure the safety of its operation andthose using it. It should only be included in industrial tooling pursuant to the design, review, authorization and final inspection of aLicensed Professional Engineer of the purchaser in concert with a Safety Engineer before use to correct any risk posed by its use. Itsinstallation is to be done by experienced machine building professionals only. All provided plates fasteners and attachments must bein place and secure to be in a safe operating condition. It must be securely installed in a manner that insures it will not become looseor unattached at any time, including during use. All valves, plumbing, wiring and other installation requirements must be consistentwith the schematic drawings in this brochure. GCP assumes no liability for damages or injury attributable to defects in any machine orappliance in which the tool is installed, or from errors in installation or any use of the tool that is inconsistent with the instructions andlimitations in this brochure.Limited Service WarrantyGCP warrants to the original use purchaser that all products and parts sold by GCP shall be free from defects of material andworkmanship for a period of one full year from the initial purchase date for direct sales, or actual delivery date by the distributorfor distributor sales so long as use of the tool is in conformity with the brochure. Proof of purchase with shipment date must befurnished by the user to validate the warranty claim. GCP provides no warranty with respect to any product not manufactured by GCP.This warranty with respect to GCP’s products is limited to the repair or replacement as elected by GCP. Shipping or transportationcost to and from GCP for inspection, repair or return of any type are not included in this warranty. Any modification or disassembly ofthe tool by anyone other than GCP personnel or any use of the tool not in conformity with the brochure will void the warranty.Disclaimer Of WarrantyOther than the Limited Service Warranty and warranty of title GCP makes no other warranty of any kind whatsoever, expressed orimplied, and hereby disclaims any warranties of merchantability and fitness for a particular purpose.web: www.sharpshooterdrill.com • e-mail: info@sharpshooterdril.compg. 11