Rapid Rail

Performance SpecificationsLift Capacityup to 1,600 lbs.Lift Cycle Time (complete*)8 secondsLift Reach8 ft.Compaction up to 700 lbs. per yd 3Working RPM (operate-in-gear-at-idle) 750 (arm) & 1,500 (packer)* Complete cycle time defined as grip, dump, return and releaseAutomated Lift SpecificationsLift load capacityCycle timeReachGround clearanceWeight*Controls* Weight includes standard 60/90 gallon grabbers1,600 lbs.8 seconds8 ft.20 in. from ground to bottom of grabber arms (based on a 42 in. chassis rail height)1,950 lbs.Electric over hydraulicCylinders SpecificationsBODY CYLINDERS Type Bore x StrokeTailgate Raise (2) Double actingin. 3.0 x 18.5mm 76 x 470Packing Blade (2) Double actingin. 5.0 x 42.0mm 127 x 1066Body Hoist(2) Double actingin. 4.0 x 55.5mm 102 x 1407LIFT CYLINDERSGripRaiseDumpReachHydraulic SpecificationsPUMPTypeMaximum Operating PressureWorking RPMFlow @ Working RPMOIL RESERVOIRGross CapacityFiltersVALVESShutoffLift and Packing ControlHoist and Tailgate Control(1) Double acting(1) Double acting(1) Double acting(1) Double actingin. 3.0 x 8.0mm 76 x 203in. 3.0 x 8.0mm 76 x 203in. 3.0 x 16.0mm 76 x 406in. 1.75 x 71.25mm 44 x 1810Operate-In-Gear-At-Idle (standard)Front mount Tandem vane2,500 psi (17,238 kPa)1,500 RPM (packer)750 RPM (arm)33/17 GPM (packer/arm)Chassis frame mounted50 gallons (246 liters)3 micron return line with magnet,140 micron mesh suction strainerSuction lineSoft-shift electric over hydraulicElectric over hydraulicChassis Requirements * 16 yd 3 20 yd 3 22 yd 3 24 yd 3 24 yd 3 26 yd 3 30 yd 3 32 yd 3Axle Single Single Single Single Tandem Tandem Tandem TandemMin. GVWR (1) 33,000 35,000 37,000 41,000 41,000 45,000 50,000 52,000Min. GAWRfront (1) 12,000 14,000 14,000 15,000 15,000 15,000 16,000 18,000rear 21,000 21,000 23,000 26,000 26,000 30,000 34,000 34,000Usable CA/CT 134 CA 157 CA 157 CA 189 CA 173 CT 173 CT 185 CT 195 CTC.O.E. Wheelbase 161 in. 182 in. 182 in. 213 in. 197 in. 197 in. 210 in. 220 in.Conventional Cab Wheelbase 206 in. 227 in. 227 in. 258 in. 242 in. 242 in. 255 in. 265 in.Min. Platform 180 in. 204 in. 204 in. 215 in. 234 in. 234 in. 246 in. 258 in.*OPERATE-IN-GEAR units require 325 ft. lbs. of net torque available at idle, with idle speed set between 650 and 750 RPM. Recommended 160 or 200 amp alternator.(1) Front axle min. GAWR requirements may be reduced up to 2,000 lbs. for chassis with actual, unladen bare front axle weights of 8,000 lbs. or less.Body Specifications 16 yd 3 20 yd 3 22 yd 3 24 yd 3 26 yd 3 30 yd 3 32 yd 3Body CapacityHopper CapacityOverall Length*Overall Length (Tailgate Raised)*Overall WidthOverall Height Above FrameLoading Sill Height Above FrameMounted Weight (route ready)* Including 30 in. for lift mountyd 3 16 20 22 24 26 30 32m 3 12.2 15.3 16.8 18.4 19.9 22.9 24.5yd 3 3 3 3 3 3 3 3m 3 2.3 2.3 2.3 2.3 2.3 2.3 2.3in. 194 218 239 248 269 281 293mm 4928 5537 6071 6299 6833 7137 7442in. 224 248 254 278 284 309 321mm 5690 6299 6452 7061 7214 7849 8153in. 96 96 96 96 96 96 96mm 2438 2438 2438 2438 2438 2438 2438in. 97 97 97 97 97 109 109mm 2464 2464 2464 2464 2464 2769 2769in. 68 68 68 68 68 68 68mm 1727 1727 1727 1727 1727 1727 1727lbs. 10,400 11,000 11,200 12,000 12,200 13,200 13,600kg. 4718 4990 5081 5444 5534 5988 6170All designs, specifications and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be construed to warrantsuitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written Warranty Statement for this product at the time of shipment.CONTACT YOUR LOCAL DEALER2030 Hamilton Place Blvd., Suite 300, Chattanooga, TN 37421866.FOR.HEIL (866.367.4345) • Fax: 423.855.3478www.heil.com© 2010, Heil Environmental, Printed in the U.S.A.FORM #SWS-000005-042110