Sealing Gaskets - GPT

How to OrderPlease provide the followng information:1. Quantity2. Nominal Pipe Size3. Pressure Rating4. Gasket Type: E or F5. Gasket Style: LineBacker, GasketSeal or FlangeMate6. Retainer Material7. Sealing Element8. Weld neck or slip-on application9. Note all special requirements10. Contact your local distributor or PSIHow to Order Example: Gasket pictured below.1- 3” 150# F LB G-10/Viton Weld NeckISO 9001:2000 Quality AssuranceAll PSI facilities are ISO 9001:2000 certifiedwith extensive quality control procedures ineffect to insure total compliance withproduct performance and reliabilitystandards. In addition, all PSI gaskets areclearly marked with the followinginformation to guarantee that the correctgasket is used for its intended application.• Brand Name• Material Make-up (retainer/seal element)• Pipe Size• Pressure Rating• Date of Manufacture StampWarrantyAll products are warranted against failure caused by manufacturingdefects for a period of one year. Any product found to be sodefective and returned within one year from date of shipment will bereplaced without charge.The above warranty is made in lieu of, and we disclaim, any and allother warranties, expressed or implied, including the warranties of merchantabilityand fitness for a particular purpose, and buyer agrees toaccept the products without any such warranties.We hereby disclaim any obligation or liability for consequential damages,labor costs or any other claims or liabilities of any kind whatsoever.Certificate No. 10125Certificate No. NACB7895Pipeline Seal and Insulator, Inc.6525 Goforth Street, Houston, TX 77021 U.S.A.Tel: 713-747-6948 • 800-423-2410 • Fax: 713-747-6029e-mail: info@psipsi.comwww.pipelineseal.comPSI-SG-305Page 12