Ajit Kelkar, Ph.D. - Nanomanufacturing Conference

Recommendations

Info

Tensile modulus (GPa)Tensile modulusTensile Modulus1201008060402000.015 wt%0.15 wt%f-0.015 wt%f-0.15 wt%Tensile modulus was minimally affected by CNT loading andfunctionalization at 0.015 wt% and 0.15 wt%.
Flexural modulus (GPa)Flexural modulus (GPa)Flexural Modulus7060504030201000.015 wt%0.15 wt%f-0.015 wt%f-0.15 wt%Flexural modulus was minimally affected by CNT loading andfunctionalization at 0.015 wt% and 0.15 wt%.
Page 1 and 2: NANOENGINEERED MATERIALSAND THEIR A
Page 3 and 4: NASA Nanotechnology RoadmapC A P A
Page 5 and 6: • Structural Composites• Applic
Page 7: Boeing 787Carbon laminateCarbon san
Page 11 and 12: FAILURE PATTERNS OF STATIC TENSILE
Page 13 and 14: INSTALLED TUNNEL COVERS
Page 15 and 16: Before Testing
Page 17 and 18: At 8,006 lbs pull in the 90 degree
Page 19 and 20: Reengineering of Nose Bay DoorPossi
Page 21 and 22: Typical Failures in Composites due
Page 23 and 24: Myth vs. Reality• Nano materials
Page 25 and 26: Nanofibers Manufacturing usingElect
Page 27 and 28: Temperature EffectsNON-SINTEREDSINT
Page 29 and 30: Homogenized Properties• Improveme
Page 31 and 32: TABLE 2. SUMMARY OF MSBS ANDSBS TES
Page 33 and 34: NANOENGINEERED MATERIAL - IICarbon
Page 35 and 36: Lightning Strikes
Page 37 and 38: OBJECTIVESTo disperse XD-CNTs into
Page 39 and 40: XD-CNTsXD nanotubes are a mixture o
Page 41 and 42: Dispersion of XD-CNTsHigh rate Shea
Page 43 and 44: TENSILE TESTS0%, 0.015% and 0.15% C
Page 45 and 46: FRACTOGRAPHYCross Section of 0.015%
Page 47 and 48: COUPONS WITH FUNCTIONALIZED XD-CNTs
Page 49: Sample Set 1 Preparation - LayoutSa
Page 53 and 54: Flexural strength (MPa)Flexural str
Page 55 and 56: Compression PropertiesSampleDescrip
Page 57 and 58: NANOENGINEERED MATERIAL - IIIAlumin
Page 59 and 60: Material System Configuration• Hy
Page 61 and 62: ProcessingResin ModificationPure Re
Page 63 and 64: Alumina Hybrid Composite LaminateMa
Page 65 and 66: ATOMISTIC MODELINGTo develop fully
Page 67 and 68: Modeling ApproachUnit Cell Developm
Page 69 and 70: Simulated AnnealingSuggested curing
Page 71 and 72: Computational DetailsNumber of atom
Page 73 and 74: Statistical AnalysisNTabular Result
Page 75 and 76: Modeling ApproachConstruct SWNT (6,
Page 77 and 78: ResultsPrediction of Young’s modu
Page 79 and 80: 298318338358378398418438458478498An
Page 81 and 82: 1.1551.2551.3551.4551.5551.6551.755
Page 83 and 84: ConclusionsDeveloped MD model EPON
Page 85: On the Lighter Side - In case Nothi

Ajit Kelkar, Ph.D. - Nanomanufacturing Conference

Create successful ePaper yourself

Delete template?

Save as template?