airclean

More documents

Recommendations

Info

AIRCLEANYOUR AIR FILTER MANUFACTURERP.O. BOX 147,MAIDSTONE, ME14 2LA.TEL:01622 832777FAX:01622 832507sales@airclean.co.uk www.airclean.co.ukCapacity ChartData based on Face Velocity of 2.5 m/s (500 fpm)SIZE SIZE Flow RateOT Inches Actual mm m 3 /s10 x 10 242 x 242 0.1212 x 12 289 x 289 0.1715 x 15 369 x 369 0.2718 x 18 445 x 445 0.4020 x 10 495 x 242 0.2420 x 16 495 x 394 0.3920 x 20 495 x 495 0.4925 x 16 620 x 394 0.4925 x 20 620 x 495 0.6124 x 12 594 x 289 0.3524 x 20 594 x 495 0.5924 x 24 594 x 594 0.71Actual Face Size = Nominal Size less 6mm (0.25”)Actual thickness = Nominal thickness less 3mm (0.125)Holding Frames and CasingsHolding frames and casings for Metal Washables are available singularlyor in multiples, and can be manufactured to suit non-standardsizes and special applications.See leaflets (code AC8) for full technical information.The company reserves the right to change specifications without notice.E&OECode AC2/2b Ref 01/11
AIRCLEANYOUR AIR FILTER MANUFACTURERP.O. BOX 147,MAIDSTONE, ME14 2LA.TEL:01622 832777FAX:01622 832507sales@airclean.co.uk www.airclean.co.ukRod Framed FiltersApplicationsThe rod framed filter is a washable panel used widely insmall air conditioning and fan coil units, warm air furnaces,refrigeration counters and electronic equipment cabinets. Itis a low resistance filter often used to protect heat exchangercoils from dust, carpet fluff etc.ConstructionThe traditional Rod framed filter has the filter media is supported by a coated rigid rod frame constructedfrom 3mm coated steel rod.However, there are three versions available.(a) Synthetic A15/150 material (white) approximately 6mm thick, on wire frame(b) Polyurethane foam media normally 6mm thick, but thicker material can be supplied, on a wire frame.(c) Synthetic media A15/150 folded over and stapled to 12mm square,1mm wire mesh, which provide ahigher level of media rigidityPore sizes of the foam can be varied to suit requirements, but are usually in the range of 20 to 60 ppi, with20 or 30 ppi being more common.Handles or tapes/loops can be provided if required.This type of filter can be manufactured to any reasonable size, typically 300mm x 1200mm maxTechnicalFilter Classification Grade G3/G4 to EN 779Maximum Operating Temperature100°C (212°F)Maximum Recommended Face Velocity 2.0 m/s (400 ft/min)Resistance To AirflowFace VelocityA 15/150 0.25”20 ppiType of Filter Media0.25”30 ppi0.25”45 ppi0.25”60 ppim/s fpm Pa “wg Pa “wg Pa “wg Pa “wg Pa “wg1.01.52.02.520030040050071220300.030.050.080.124711170.0150.0280.0430.06571220300.0280.0500.0800.120The company reserves the right to change specifications without notice. E&OE101830400.040.070.120.16183350760.070.130.200.30Code AC2/4 Ref 05/06
Page 2 and 3: AIRCLEANYOUR AIR FILTER MANUFACTURE
Page 64 and 65:
AIRCLEANYOUR AIR FILTER MANUFACTURE
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94:
show all

airclean

Create successful ePaper yourself

Delete template?

Save as template?