English - Supra cables

6Round/Twisted Loudspeaker CablesRondo 2x2.52x2.5 mm 2 . Tin plated.Application example: Hi-Fi or stage use inmedium or shorter lengths in high powersystems.Rondo 4x2.54x2.5 mm 2 . Tin plated.Application examples: Bi-wiring, pair channelcable for medium power systems or singlechannel connected for high power systems.For Hi-Fi or stage use.Rondo 4x4.04x4.0 mm 2 . Tin plated.Application examples: Bi-wiring, pair channelcable or single channel connected for highpower systems. For Hi-Fi or stage use.1:1 1:1 1:1Loudspeaker Cables /// Interconnect Cables /// Connectors /// Interconnects ///Tips and Tricks:How to connect Supra Rondo 4x2.5 and Rondo 4x4.0for lowest inductanceConnecting Rondo as shown in the figure below will makea lower inductance of 0.25 and 0.35 µH/m, respectively,which in turn makes them top class high-end loudspeakercables.+- -+SUPRA Concentric Cables are highly flexible and of short pitchtwisting for low inductance and low radiation as well as a hightolerance to frequent bendings and vibrations before bendingfatique.This short pitch twisting takes special machines and is a slower andmore expensive production which you do not often find in otherthan the Supra portfolio.Test andReviewsRondo 4x2.5Italy www.tnt-audio.com/accessories/sword-rondo_e.htmlUK What Hi-Fi 5 stars Sept ’02UK What Hi-Fi Best Buy Award 2002ItemMechanical SpecificationsElec. Spec.Colour Cross Sec. Area Number of Number of Wire Dia. Wire Insulation & Ext. Size Weight Length/Bobbin R L(mm 2 =AWG) Conductors Wires (mm) Material Jacket (mm) (g/m) (m = ft) (Ω/km) (µH/m)Rondo 2x2.5 AnthraciteThe screen is to be connected to 2 the amplifier chassis or any other ground Ø7.5 110 100 = 328 0.40Rondo 2x2.5 Ice Blue Tin ChlorideRondo point 4x2.5of Anthracite the amplifier. 2.5 No = 13 connection is needed 320 at the 0.10loudspeaker Plated Ion-stabilized end.6.8Ø9.5 170 75 = 246 0.35Rondo 4x2.5 Ice Blue 4 OFC PVCRondo 4x4.0 Anthracite 4.0 = 11 511 Ø11 236 50 = 164 4.3 0.40Connect the loudspeaker cables for signal direction = direction of the legend (text) printed on the cable. Explanation on page 30.