Shovel Mechanical eLearning Course Catalog - P&H Mining ...

Shovel Mechanical eLearningCourse Catalog• Topic 7 Auto Tensioning System - Auto Control• Topic 8 Replacement of Crowd BeltsLesson 16.4 Crowd GearcaseLesson Description:This Lesson describes the components associated with the Crowd Gearcase and how to inspect, remove,disassemble, assemble, and install them.Objectives:Upon completion of this Lesson the student will:• Identify the major components associated with the Crowd Gearcase Assembly.• Describe the recommended inspection procedure for the Crowd Gearcase and the components associatedwith the Crowd Gearcase.• Describe the recommended repair practices related to the Crowd Gearcase.• Describe the procedure to remove the Crowd Gearcase.• Describe the procedure used to remove the components associated with the 1st Reduction Assembly ofthe Crowd Gearcase.• Describe the procedure used to remove the components associated with the 2nd Reduction Assembly ofthe Crowd Gearcase.• Describe the procedure used for the disassembly of components associated with the 1st ReductionAssembly of the Crowd Gearcase.• Describe the procedure used for the disassembly of components associated with the 2nd ReductionAssembly of the Crowd Gearcase.• Describe the procedure used to assemble the components associated with the 1st Reduction Assembly ofthe Crowd Gearcase.• Describe the procedure used to assemble the components associated with the 2nd Reduction Assembly ofthe Crowd Gearcase.• Describe the steps required for the installation of components associated with the 1st Reduction Assemblyof the Crowd Gearcase.• Describe the steps required for the installation of components associated with the 2nd Reduction Assemblyof the Crowd Gearcase.• Describe the steps required for the installation of the Crowd Gearcase.Lesson Outline:• Introduction• Topic 1 Inspection• Topic 2 Repair• Topic 3 Removal• Subtopic 1 Crowd Gearcase• Subtopic 2 1st Reduction Assembly• Subtopic 3 2nd Reduction Assembly• Topic 4 Disassembly• Subtopic 1 1st Reduction Assembly• Subtopic 2 2nd Reduction Assembly• Topic 5 Assembly• Subtopic 1 1st Reduction AssemblyShovel Mechanical eLearning Course Catalog.docx 39