Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Ordering Keys<br />
Linear Units with Ball Screw Drive and Slide Guides<br />
M75D, M100D<br />
Your Code<br />
1 2 3 4 5 6 7<br />
Example MG10 D109 A 00 X 355<br />
1. Type of unit<br />
MG07 = M75D unit<br />
MG10 = M100D unit<br />
2. Ball screw type, lead and tolerance class 2<br />
D057 = double ball nut, 5 mm, T7<br />
D107 = double ball nut, 10 mm, T7<br />
D109 = double ball nut, 10 mm, T9<br />
D129 = double ball nut, 12,7 mm, T9<br />
D207 = double ball nut, 20 mm, T7<br />
D257 = double ball nut, 25 mm, T7<br />
3. Type of carriages<br />
A = single standard carriage<br />
C = double standard carriages<br />
4. Distance between carriages (Lc)<br />
00 = for all single standard carriage units<br />
• • = distance in cm between carriages<br />
5. Screw supports<br />
X = no screw supports<br />
S = single screw supports<br />
D = double screw supports<br />
6. Ordering length (L order)<br />
• • • = distance in cm<br />
7. Protection option 1<br />
S1 = S1 wash down protection<br />
1 Leave position blank if no protection option<br />
required.<br />
2 See below table for available <strong>com</strong>binations of<br />
units and ball screw type, lead and tolerance.<br />
Ball<br />
screw<br />
Type of unit<br />
type M75 M100<br />
D057 x x<br />
D107 x<br />
D109 x<br />
D129 x<br />
D207 x<br />
D257 x<br />
208 <strong>www</strong>.<strong>danahermotion</strong>.<strong>com</strong>