You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Model IMBLTM Inverted Monobloc with Liner<br />
IMBL Specifications<br />
Nominal Burst Ratings Internal<br />
Disk<br />
Size Barg PSIG Diameter Thickness<br />
mm in Min Max Min Max mm in mm in<br />
15 0.5 1.73 17.2 25 250 15.9 0.625 16 0.625<br />
20 0.75 1.73 17.2 25 250 21.0 0.825 16 0.625<br />
25 1 0.69 17.2 10 250 27.2 1.07 22 0.875<br />
40 1.5 0.49 17.2 7 250 41.1 1.62 22 0.875<br />
50 2 0.21 17.2 3 250 52.6 2.07 22 0.875<br />
80 3 0.14 17.2 2 250 78.0 3.07 22 0.875<br />
100 4 0.104 17.2 1.5 250 103.4 4.07 22 0.875<br />
150 6 0.069 11.7 1 170 154.2 6.07 22 0.875<br />
200 8 0.035 11.7 0.5 170 205.0 8.07 29 1.125<br />
250 10 0.0173 10.3 0.25 150 255.8 10.07 38 1.50<br />
300 12 0.0173 10.3 0.25 150 306.6 12.07 51 2.00<br />
350 14 0.0173 10.3 0.25 150 336.5 13.25 57 2.25<br />
400 16 0.0173 10.3 0.25 150 387.4 15.25 64 2.50<br />
450 18 0.0173 10.3 0.25 150 438.2 17.25 70 2.75<br />
500 20 0.0173 10.3 0.25 150 489.0 19.25 76 3.00<br />
600 24 0.0173 10.3 0.25 150 590.6 23.23 76 3.00<br />
15 0.5 1.73 68.9 25 1000 15.9 0.625 16 0.625<br />
20 0.75 1.73 68.9 25 1000 21.0 0.825 16 0.625<br />
25 1 0.69 68.9 10 1000 27.0 1.07 25 1.00<br />
40 1.5 0.49 68.9 7 1000 41.1 1.62 25 1.00<br />
50 2 0.21 34.4 3 500 52.6 2.07 25 1.00<br />
80 3 0.14 34.4 2 500 78.0 3.07 32 1.25<br />
100 4 0.104 34.54 1.5 500 103.4 4.07 32 1.25<br />
150 6 0.069 31 1 450 154.2 6.07 44 1.75<br />
200 8 0.035 31 0.5 450 205.0 8.07 57 2.25<br />
For other disk thickness, contact BS&B Safety Systems, L.L.C. or BS&B Safety<br />
Systems LTD.<br />
Inverted monobloc with liner extends corrosion resistance and<br />
resists product build-up with the use of a PTFE liner.<br />
When using an inverted monobloc disk with liner in<br />
application:<br />
� If a vacuum support is required, Model MBV TM disks must<br />
be specified; with PTFE coating if required.<br />
� Temperature ranges -73 0 C to 205 0 C (-100 0 F to 400 0 F).<br />
� Armoring is recommended for all graphite disks for added<br />
safety, easier installation and elimination of breakage during<br />
installation<br />
� Armor reduces the possibility of a premature burst due to<br />
uneven or excessive torqueing of the flange studs<br />
� Corrosion resistant (except free fluorine)<br />
IMBL<br />
Inverted monobloc disks with liner extends<br />
corrosion resistance to practically all corrosives except free fluorine.<br />
(For Venting Capacities Chart please refer to page 5.)
Change language