Remington Premier Over and Under Shotgun - EAA

More documents

Recommendations

Info

Choke TubesWARNINGNever install or remove choke tubes while the firearm is loaded. Only install or remove choke tubes with the firearmunloaded, the action open and the trigger block safely engaged.ProBore Chokes Symbols/Markings(This is an option – not all Premier ® Over and Under shotguns have this feature)The end of the choke tubes are marked with notches to identify the choke construction:/ - Skeet// - Improved Modified/// - Light Modified//// - Modified///// - Improved Cylinder////// - FullWARNINGMAKE SURE YOU FULLY TIGHTEN THE CHOKE TUBE.Shooting with a loose choke tube can cause damage to your shotgun.Additional Information On ProBore Choke Tubes:1. Only tighten or loosen choke tubes with wrench supplied with shotgun.2. Never shoot the shotgun with a partially installed choke tube3. Correctly installed choke tubes: Flush choke tubes should fit flush or slightly below the muzzle end of thebarrel. Extended choke tubes will protrude out from the barrel about 3 / 4 ” and the mating lip will be flushwith barrel end.4. Before using the shotgun make sure that the choke tubes are installed correctly.5 Keep choke tubes lubricated and installed. Never fire the gun without a choke tube installed.Handle choke tubes carefully since the leading edge is very thin.A WORD ON THE MAINTENANCE AND CARE OF YOUR REMINGTON FIREARMDon’t Alter or Modify Your Gun and Have it Serviced Regularly.Your firearm has been designed to operate according to certain factory specifications. You’ll jeopardize yoursafety and that of others around you by attempting to alter its trigger, mechanical safety or other mechanisms.So never alter or modify your firearm in any way. Like any mechanical device, a firearm is subject to wear. It mustbe maintained and periodically serviced to assure optimum safety and performance. Only a qualified servicefacility should service, repair or modify your Remington ® firearm. Consult your instruction book for instructionson how to send your firearm to the factory or for the location of the nearest Remington Authorized Service Center.Remington recommends that you have your firearm professionally serviced annually. You should also have yourfirearm professionally serviced after prolonged storage, or if there is ever any question pertaining to the properfunctioning characteristics of your firearm. Proper cleaning and lubrication are also important to firearm maintenanceand are necessary to assure accuracy, safety and reliability. Before cleaning, always make sure that your gunis completely unloaded. And always clean the barrel from the chamber end to the muzzle when possible.20
REMINGTON I.S.P.c/o USSG1426 King StreetCocoa, FL 32922Manufacturer:Sabatti s.p.a.Via Alessando Volta, 9025063 Gardone Valtrompia (Brescia) Italy21
Page 3 and 4: 2nd COMMANDMENT (cont’d)Firearms
Page 5 and 6: LEAD EXPOSURE WARNINGDischarging fi
Page 8 and 9: Important Parts of the Firearm (con
Page 10 and 11: Assembly Instructions) (cont’d)TO
Page 12 and 13: How To Load And Unload (cont’d)TO
Page 14 and 15: Lubrication And MaintenanceWARNING!
Page 16 and 17: Manufacturer’s WarningThis firear
Page 18 and 19: PARTS AND SERVICE (cont’d)One Yea
Page 22: Remington is a trademark registered

Remington Premier Over and Under Shotgun - EAA

Create successful ePaper yourself

Delete template?

Save as template?