ATEX Safety Torch with LED Leaflet - Wolf Safety Lamp Company

Wolf ATEX Safety Torch withLED gives reliable, simple, costeffective, high output LEDperformance in a straight orright-angle body style.The TR-30+ and TS-30+ torches,incorporating the Wolf TP-300 ‘TorchLED Module’, give an exceptionaloutput of up to four times more lightthan an incandescent torch bulb,generating a piercing white spotbeam combined with a wide angleflood of fringe light, for excellentvisibility in conditions of darknessor reduced visibility.With a typical life of over 25,000hours, the TP-300 LED is expectedto last the product lifetime,minimising product maintenance andeliminating risk of light source failure.Additionally the highly efficient LEDtechnology gives an increasedbattery duration of up to 27 hoursfrom a set of two alkaline ‘D’ cells,more than twice the duration froma conventional safety torch usingthe same cells.The TP-300 LED moduleincorporates a low battery indicator,emitting a flashing red LED signal toshow good battery power andcorrect torch function, changing to astatic red LED signal to warn of ’lowbattery’ power. After several hours inthe ‘low battery’ phase, the light willcut out.The Wolf ATEX Torch range is CEmarked compliant with the 94/9/ECATEX Explosive AtmospheresEquipment Directive. Certificationto the latest standard is for use inpotentially explosive gas, vapour andmist atmospheres, zones 1 and 2,temperature class T4. Dust ignitionprotection covers use in zones 21and 22, with the certified maximumsurface temperature of 95°C.Temperature ambient of use is from-20°C to a maximum of +40°C or55°C with certain cells as specifiedin the instructions. Both models arealso certified to the IECEx Scheme,where temperature ambient is-20°C to +40°C.The compact Wolf TS-30+ andTR-30+ Torch bodies, in straight orright-angle forms, have an enhancedergonomic design for easy grip andsingle handed switching, even withgloved hands. The torch bodies offerhigh strength and proven impactresistance, even at sub zerotemperatures, using carefully selectedthermoplastic resins with excellentchemical resistance. Additionally, therubber armoured lens ring and endcap give enhanced grip and shockprotection. The shatterproofpolycarbonate lens has a scratchand chemical resistant coating.Wolf ATEX Torches are sealed dusttight and protected from waterimmersion with a certified IP67enclosure. The right angle modelincorporates a replaceable highstrength thermoplastic belt clip forhands-free use. Both models allowstraightforward battery replacement.All models are supplied withwrist straps.As well as for use in the TR-30+ andTS-30+ torches, the TP-300 ‘TorchLED Module’ can be ‘retro-fitted’ bythe user into the Wolf ATEX SafetyTorch T4 models including; TR-24,TR-24+, TS-24 or TS-24+ to bringthese same improvements to WolfATEX T4 torches already in use.For further information, seeWolf website.Wolf ATEX Safety Torch with LEDTechnical SpecificationModel TS-30+ TR-30+DescriptionATEX Safety Torch with LED, Primary Cell PoweredStraight T4 LED Torch with indicator R/Angle T4 LED Torch with indicatorCode ATEX II 2 GDEx e ib IIC T4 Gb (Ta=40/55°C)Ex tb IIIC T95°C Db (Ta=55°C)IECExEx e ib I/IIC T4 IP67/Ex tD A21 T95Type of protectionIncreased Safety, intrinsic safetyArea of classification (gas)Zone 1 & 2, Gas Groups IIA, IIB, IICMax surface temp (gas)T4Ambient temperature (gas)-20°C to +40°C/+55°C-20°C to +40°C (IECEx)Area of classification (dust) Zone 21 and 22Temperature class (dust) 95°CAmbient temperature (dust)-20°C to +55°C-20°C to +40°C (IECEx)CertificateBAS02ATEX2220XIECEx TSA 05.0017XEnclosure materialImpact resistant thermoplastic, electrostatic non-hazardousLensPolycarbonate, impact resistant with hard coatBeam typeMedium SpotLight source Part No. TP-300PowerTorch LED ModuleOutput70 lmLED Life25,000 hrs plusPower Source Part No. 2 x H-20 (LR20)Battery typeLR20 primary cells to IEC60086Volts 2 x 1.5vLight durationUp to 22 hours to low power indicator up to 27 hours totalIngress protectionIP67Weight (incl. cells) 475g 500gNote: All information has been gathered under laboratory conditions, the user must regard the values given as approximate.WOLF SAFETY LAMP COMPANYSaxon Road Works, Sheffield S8 0YA, EnglandTel: +44 114 255 1051 Fax: +44 114 255 7988E-mail: info@wolf-safety.co.uk Website: www.wolf-safety.co.ukRevised October 2011MMD/11.11SL035 issue 01