12.07.2015 Views

Lippard Model 1911 A2 Pistols & A2/A3 Upgrade ... - Karl Lippard

Lippard Model 1911 A2 Pistols & A2/A3 Upgrade ... - Karl Lippard

Lippard Model 1911 A2 Pistols & A2/A3 Upgrade ... - Karl Lippard

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Lippard</strong> Combat NCO Nose Piece (Compensator)–Patented by <strong>Karl</strong> <strong>Lippard</strong>,the Nose Piece fits all <strong>1911</strong> style pistols that employ a <strong>1911</strong> type barrel bushing. A<strong>Lippard</strong> patented Barrel Bushing is made integrally within the <strong>Lippard</strong> NosePiece, thus replacing the standardbarrel bushing when the Nose Pieceis attached to the pistol. Thepatented <strong>Lippard</strong> Nose Pieceprovides needed forward balance onthe typical rear-heavy <strong>1911</strong> gun,offering a nicer feel and bettercontrol of the gun when sighting,especially offhand. The Nose Piecealso greatly reduces recoil, allowingthe shooter faster recovery ontotarget between shots, and a kinderfeeling gun while shooting. Lastly,the patented <strong>Lippard</strong> Nose Piece<strong>Lippard</strong> Combat NCO Nose Pieces unfinished.eliminates flash blindness for the shooter while firing at night, by focusing themuzzle flash into a narrow cone in front of the gun, blocking it from view of theshooter. This is especially helpful when firing the gun at night and employingNight Vision Optics.<strong>Lippard</strong> Combat NCO <strong>A2</strong> Sights–Also patented by <strong>Karl</strong> <strong>Lippard</strong>, the <strong>Lippard</strong>Combat NCO <strong>A2</strong> Sights enable quicktarget acquisition at close range whilealso providing capabilities to effectivelyput shots accurately on target at ranges of100, 200, 300 and 400 yards, and toengage effective suppression fire at 500and 600 yards. The rear sightslot/aperture width is calibrated to matchthe front sight width so that rather thantrying to center the front sight blade in aslot with daylight on each side, theshooter strives to maintain a solid blackline across the rear sight, no daylight showing on either side of the front sightUnfinished, Combat NCO sights in the raw.blade. At close ranges out to 100 yards, the front sight is set for center mass, pointof aim or point of impact. The sights can also be calibrated on the gun for a sixo’clocktarget hold, if that is the preference. Standard sight setting on both the<strong>Lippard</strong> Close Quarters Battle Pistol and Combat NCO is center mass, but canbe changed upon request to the six-o’clock hold with a minor adjustment. The<strong>Lippard</strong> front sight has deep calibration lines cut at calibrated intervals below thePage 8 of 10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!