Materials - Kinetech Medical

More documents

Recommendations

Info

PolyolefinsTechnicalinformationPE-HD500ThermoLyn® RCH 500 PE-HD 500ThermoLyn® RCH 500 is a manufacturer‘sterm describing a PE-HD with a medium molecularweight. The material has a homogenousstructure, even quality as well as excellent rigidityand low tendency to shrink. Because ofits good mechanical properties, this material isnot as easy to shape as ThermoLyn® PE 200616T95 in a thermoplastic state. However, itfeatures adequate weldability and exhibitsgood heating behavior, thus ensuring satisfactoryprocessing. Thanks to its high strength andgood friction characteristics, this plastic can beused along with Joint Screws 501A33 and JointBolts 505L1 as an overlapped joint for orthosisbushings. It comes in a variety of colors forcustomizing orthoses.Properties (convection oven)Forming temperature 185 °C / 365 °FHeating time3 min/mmDensity 0.95 g/cm 3Shrinkage Approximately 2 %BondingNot permanently bondedForm as supplied:ThermoLyn® RCH 500 (PE-HD 500)Homogenous thermoplastic with high level of stiffness, processingtemperature of 195 ºC / 383 °F (heating plate), 185 ºC / 365 °F(convection oven), 185 ºC / 365 °F (infrared oven)Article number616T43Length 950 mm 1,910 mmWidth 910 mm 910 mmThickness2 mm, 3 mm, 4 mm,5 mm, 6 mmColor Red Red2 mm, 3 mm, 4 mm,5 mm, 6 mm, 8 mmArticle number 616T44Length 950 mm 1,910 mmWidth 910 mm 910 mmThickness2 mm, 3 mm, 4 mm,5 mm, 6 mm2 mm, 3 mm, 4 mm,5 mm, 6 mm, 8 mm,10 mmColor Blue Blue12 Otto Bock HealthCare GmbH | <strong>Materials</strong> 2007 | www.ottobock.com
PolyolefinsThermoLyn® RCH 500 (PE-HD 500)Homogenous thermoplastic with high level of stiffness, processing temperatureof 195 ºC / 383 °F (heating plate), 185 ºC / 365 °F (convectionoven), 185 ºC / 365 °F (infrared oven), special sizes or other thicknessavailable upon request.TechnicalinformationArticle number 616T22Length 950 mm 1,910 mmWidth 910 mm 910 mmThickness1 mm, 2 mm, 3 mm,4 mm, 5 mm, 6 mm,8 mm, 10 mm1 mm , 2 mm, 3 mm,4 mm, 5 mm, 6 mm,7 mm, 8 mm, 10 mmColor Natural colors (N) Natural colors (N)Article number 616T22Length 950 mm 1,910 mmWidth 910 mm 910 mmThickness2 mm, 3 mm, 4 mm,5 mm, 6 mm, 8 mm1 mm , 2 mm, 3 mm,4 mm, 5 mm, 7 mmColor Skin colors (H) Skin colors (H)Article numberLengthWidthThicknessColor616T221,910 mm910 mm3 mm, 4 mm, 5 mmGraffity (G)Otto Bock HealthCare GmbH | <strong>Materials</strong> 2007 | www.ottobock.com 13
Page 5 and 6: Ordering InformationUser guide and
Page 7 and 8: HighlightsHighlights of this catalo
Page 9 and 10: Kunde nr.FirmaStraßePLZ/OrtAuftra
Page 11 and 12: Technical informationTechnicalinfor
Page 14 and 15: Technical informationInformation* a
Page 16 and 17: PolyolefinsTechnicalinformationPoly
Page 18 and 19: PolyolefinsTechnicalinformationPP-C
Page 22 and 23: PolyolefineTechnicalinformationPE-H
Page 24 and 25: PolystyreneTechnicalinformationPSPo
Page 28 and 29: Ethylene-vinyl acetateTechnicalinfo
Page 30 and 31: LTT PolyesterTechnicalinformationLT
Page 33 and 34: Technical informationTechnicalinfor
Page 35 and 36: Heating plastics in infrared ovensH
Page 37 and 38: Heating plastics in infrared ovensW
Page 39 and 40: Plaster and forming techniquesPlast
Page 41 and 42: Plastering materialsStucco PlasterO
Page 43 and 44: Plastering materialsCopying PensFor
Page 45 and 46: Plastering materialsStockinette Hol
Page 47 and 48: Materials for making impressionsImp
Page 49 and 50: Materials for forming techniquesPed
Page 51 and 52: Mold-making materialsModeling WaxHa
Page 53 and 54: Pedilen® foamsPedilen® foamsThe m
Page 55 and 56: Pedilen® Rigid FoamsPedilen® Rigi
Page 57 and 58: Pedilen® Flexible FoamsPedilen® F
Page 59 and 60: Pedilen® Flexible FoamsPedilen®fo
Page 61 and 62: Silicones and accessoriesSilicones
Page 63 and 64: Silicone gelsBonding AgentImproved
Page 66 and 67: SiliconesTechnicalinformationPlaste
Page 68 and 69: Adhesives and silicone extrasTechni
Page 70 and 71:
Adhesives and silicone extrasTechni
Page 72:
Lamination technique64
Page 75 and 76:
Orthocryl® Lamination ResinsOrthoc
Page 77 and 78:
Acrylic processingAcrymed PolyTrans
Page 79 and 80:
Araldit® Lamination Resin and acce
Page 81 and 82:
Araform Lamination Resin for mold m
Page 83 and 84:
Materials for lamination techniques
Page 85 and 86:
Materials for Pedilen® and laminat
Page 87 and 88:
Materials for Pedilen®, silicone a
Page 89 and 90:
Materials for Pedilen®, silicone a
Page 91 and 92:
Reinforcement materials for laminat
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Water transfer printing and socket
Page 103 and 104:
Water transfer printingOverview of
Page 105 and 106:
Socket design“Festival” Socket
Page 107 and 108:
Socket design“Italian Holiday”
Page 109 and 110:
Socket designWater transferprinting
Page 111 and 112:
Thermoplastics and accessoriesTherm
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Thermoplastics and accessoriesInfra
Page 121 and 122:
Page 123 and 124:
Thermoplastics and accessoriesPlast
Page 125 and 126:
Page 127 and 128:
ThermopapersThermopaper “Penguin
Page 129 and 130:
ThermopapersThermopaper “Decor vi
Page 131:
SilverShield® TechnologySilverShie
Page 134 and 135:
Padding materials126
Page 136 and 137:
Padding material in sheets, thermop
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Padding materialTechnicalinformatio
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Technogel® Padding MaterialsTechni
Page 154 and 155:
Cork plates and block feltTechnical
Page 156:
Leather for Orthopedic and Shoe Tec
Page 159 and 160:
FabricsVelvetonePure cottonBeige, m
Page 161 and 162:
Cover FabricsPaddingmaterialsOtto B
Page 163 and 164:
Adhesives and accessoriesAdhesives
Page 165 and 166:
Adhesive puttyHardener PasteFor 636
Page 167 and 168:
Varnishes and thinnersSocket Interi
Page 169 and 170:
Varnishes and thinnersAcetoneChemic
Page 171 and 172:
Glues and adhesivesOtto Bock Contac
Page 173 and 174:
Glues and adhesivesThinnerFor 66W P
Page 175 and 176:
Glues and adhesivesRubber AdhesiveO
Page 177 and 178:
Glues and adhesivesHardener PasteFo
Page 179 and 180:
Glues and adhesivesLoctite® 245For
Page 181 and 182:
SuperSkin and accessoriesSuperSkin
Page 183 and 184:
Materials for aesthetic improvement
Page 185 and 186:
Materials for aesthetic improvement
Page 187 and 188:
Metal parts, small parts and access
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Coating materialsSintering PowderWe
Page 195:
Grinding, sanding and polishing mat
Page 198 and 199:
Grinding and sanding materials for
Page 200 and 201:
Grinding and sanding tools for mill
Page 202 and 203:
LubricantsTechnicalinformationPlast
Page 204 and 205:
LubricantsTechnicalinformationSilic
Page 206 and 207:
Rivets, pins and washersTechnicalin
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Pads and carrying strap buttonsTech
Page 214 and 215:
Rosettes and setting nutsTechnicali
Page 216 and 217:
Rosettes and setting nutsTechnicali
Page 218 and 219:
Rubber stop clamps, roller sets, wo
Page 220 and 221:
Buckles and eyeletsTechnicalinforma
Page 222 and 223:
Buckles and eyeletsTechnicalinforma
Page 224 and 225:
Straps and lacesTechnicalinformatio
Page 226 and 227:
Hook & loop tapes and closuresTechn
Page 228 and 229:
Hook & loop tapes and closuresTechn
Page 230 and 231:
Valves for vacuum socket systems222
Page 232 and 233:
Valves for vacuum socket systemsTec
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Bandages, socks and walking aids230
Page 240 and 241:
Bandages and accessoriesTechnicalin
Page 242 and 243:
Bandages and accessoriesTechnicalin
Page 244 and 245:
Protection pads and capsTechnicalin
Page 246 and 247:
Protection pads and capsTechnicalin
Page 248 and 249:
Residual limb socksTechnicalinforma
Page 250 and 251:
Residual limb socks and eyeletsTech
Page 252 and 253:
Residual limb socks and accessories
Page 254 and 255:
Derma Seal residual limb socksTechn
Page 256 and 257:
Compression residual limb socksPadd
Page 258 and 259:
Accessories and careTechnicalinform
Page 260 and 261:
Accessories and careTechnicalinform
Page 262 and 263:
Armrests, canes and accessoriesTech
Page 264 and 265:
Armrests, canes and accessoriesTech
Page 266 and 267:
Protective equipment258
Page 268 and 269:
Protective equipmentTechnicalinform
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Protective equipmentProtectiveequip
Page 282 and 283:
General Order FormFax to the addres
Page 284 and 285:
Water transfer printingFax to the a
Page 286 and 287:
List of key words/indexList of key
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
List of key words/indexIndexTechnic
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Notes
Page 300:
Otto Bock HealthCare GmbHMax-Näder
show all

Materials - Kinetech Medical

Create successful ePaper yourself

Delete template?

Save as template?