engine - Automatic Distributors

ENGINESKI DOO Engine Torque Armhelmets &accessoriesclothing &accessoriesgloves &accessoriesboots &accessoriesluggageaccessoriesfor 583-670 formula z, 670 summit and summit x(NOT FOR REED VALVE TWINS)You experience better performance with the clutches in alignment. The SLPTorque Arm holds the engine in place to have consistent belt alignment.Less belt and clutch wear is also a benefit. The arm is equipped with adamper to avoid transmitting vibration into the chassis.sp2326 33.95Proper clutch alignment under load means optimum clutching efficiency, allowing maximum transfer of horsepower to the ground.YAMAHA adjustable engine torque armfor yamaha 700 triple sx and mountain maxbody &chassisengineelectrical &ignitioncontrolsfuel &intakerewindclutchdriverearsuspensionfrontsuspensiontractionproductsmini sledschemicalsThis lightweight aluminum torque arm helps improve your clutchperformance by holding the engine true. This push style torque armis adjustable to insure proper center to center spec and torque fit.sp2325 49.95LightweightAluminumConstructionProper clutch alignment under load means optimum clutching efficiency, allowing maximum transfer of horsepower to the ground.polaris engine stabilizer kitfor polaris 2005-06 iq 700 (755) / 900 twins (NOT compatible with electric start)Hold your engine securely in place with this Engine Stabilizer Kit fromSLP. This kit combines an SLP Torque Arm and SLP Push Arm to ensureproper engine alignment for maximum performance and consistency.The Torque Arm mounts on the PTO (clutch) side of the engine in theelectric start mounting holes and pulls to the bulkhead. The Push Armmounts on the MAG (recoil) side of the engine and pushes from thebulkhead to the recoil housing. Both the Torque Arm and Push Armutilize special vibration absorbing products to limit vibration transferredto the chassis. Benefits include: substantially increased belt life,reduced belt and clutch heat, more horsepower transfered to the groundand more consistant performance from one condition to another.polaris engine torque armFor 2011-12 Polaris 800 rush, rmk, assault,switchback, and switchback assaultThis new torque arm kit holds the engine inplace when under hard acceleration or heavyload. Benefits include better and more consistenthorsepower transfer to the ground, lower belt/clutchtemperatures, better belt and motor mount life.Increase YourBelt Life!PART #dESCRIPTION236176 144.90 2005 900236177 144.90 2006 700 (755) / 900off-roadtoolssnowblowerpartsgo carttrailer &towing236178 94.95POLARIS SLP Engine Push Armfor Polaris 600/700/800 twins(recoil front side)The high torque of the new twins creates anunwanted movement of the engine. SLP’sPush Arm helps eliminate this problem bypushing from the right side shock tower to thefront of the recoil. When used in conjunctionwith a Torque Arm, engine movement isnearly eliminated, keeping clutching efficiencyoptimized without increasing vibration.PART #dESCRIPTIONSP2341 49.95 1997-02 Standard andgen II Big Block EnginesSP02350 49.95 2000-05 Edge Big Block EnginesSP02354 49.95 2002-04 Pro X (except 600)236174 49.95 2006-09 600 HO IQ Carb Models236175 49.95 2007-12 600 HO CFI IQ/Raw,2007-10 700 HO CFI/800 HO CFI236172 49.95 2005 900 IQ236173 49.95 2006 700/900 IQProper clutch alignment under load means optimum clutching efficiency, allowing maximum transfer of horsepower to the ground.