Easy Talk Quick Help Guide

More documents

Recommendations

Info

2SETTINGALARM REMINDER:1. Press the “M” button“AL” will appear on screen2. Press “C” button to activate alarmClock figurealong with time will flash3. Press “M” buttonHour will flash4. Use the “C”button tomodify hour for alarm5. Press “M” buttonMinute willl flash6. Use the “C”button tomodify minutes for alarmSETTINGMEASUREMENT UNIT:1. Press the “M” buttonMeasurement unit will flash2. Press the “C” button to changeto “mg/dL”DELETING MEMORY:1. Press the “M” button“del” will appear on screen2. Press the “C” button to delete memory(IF NO MEMORY TO DELETE MOVE ON TONEXT STEP)SETTINGTHE VOLUME:1. Press the “M” button“VOL” will appear onscreen2. Press “C” button to turn speaker onSpeaker symbol will appear on screen3. Press the “M” buttonYou will seee a number (0‐7) flash on screen4. Use the “C”button tomodify the volumelevel5. Press the “M” buttonto save and turn meter off
3Control Solution Test:1. Insert strip inside meter2. Once meter is ready for blood sample, press “C” button3. Shake control solution4. Place 2 nd drop on finger tip5. Touch solution to tip of strip• Solution willl be absorbed andresult will appear6. Find out the level of control solutionused (low or high)7. Compare result to corresponding range on strip vial label• Ifresult ishigher or lower than the range then there is an issuewith meter

Easy Talk Quick Help Guide

Create successful ePaper yourself

Delete template?

Save as template?