Continental Industrial Tyres - Vrakking

Stack/LiftStack/LiftFor vehicles that lift goods vertically, often in verynarrow spaces. Frequent changes of direction, accelerationand braking are required.Special information: the load capacity and thereforethe size of the tyre will be selected and approved bythe vehicle manufacturer. Changes are possible onlyas far as a manufacturer released option.This brochure refers to the choice of tyre type(pneumatic and solid-tyres) and the profile. It shouldbe noted that the conversion from pneumatic to solidtyres will improve stability. Before changing over fromsolid tyres to pneumatic tyres, you should consult themanufacturer about using a different load capacity.over 5 mup to 5 mup to 3,5 mFeaturesBenefitsup to 35 km/h (22 mph)IC 40 Extra DeepDesigned for tough applications in gruelling conditions.Cross-ply - Industrial Pneumatic Tyresover 5 mup to 5 mup to 3,5 m• good suspension• extra deep profile• strengthened sidewall good ride comfort long service life for low operating costs reduces tread damageFeaturesBenefitsup to 35 km/h* (22 mph*)* in twin applicationsover 5 mConRad HTRadial - Industrial Pneumatic TyresTougher for longer service in heavy duty applications, with exclusive asymmetricalhalf track tread giving extra benefits in twin fitments and steer wheels.up to 35 km/h (22 mph)IC 10/12Cross-ply - Industrial Pneumatic TyresThe universal tyre for all wheel positions.• robust belted construction• solid shoulder reduces tread damage steady grip on twin fitments and steering-wheels• proven tread pattern• good suspension good traction good ride comfort• extra deep profile long service life for low operating costs• reinforced sidewall improved sidewall stabilityup to 35 km/h (22 mph)IC 80 Extra Deep Radial - Industrial Pneumatic TyresGreater damage resistance, designed for the toughest applications.• extra deep profile high mileage• robust belted construction puncture resistanceup to 35 km/h (22 mph)IC 30Cross-ply - Industrial Pneumatic TyresThe construction vehicle profile for forklifts and loaders on unpaved surfaces.The profile is available in size 23x9-10 (225/75-10) and27x10-12 (250/75-12).• good suspension excellent ride comfort• strong, wear-resistant lugs good mileage• open tread pattern good tractionup to 35 km/h (22 mph)IC 70The universal tyre for all wheel positions.Radial - Industrial Pneumatic Tyres• good suspension• even ground pressure• robust belted construction excellent ride comfort good grip and traction puncture resistant14 15