CORDLESS DRILL DRIVER

OPERATION2. KEYLESS CHUCK 3. CONTROLSInstalling Drill BitCaution: Do not handle drill bits or other accessories withoutgloves as they are sharp and can become hot after use, potentiallycausing personal injury.2. KEYLESS CHUCK1. Open the chuck jaws.Forward/ Reverse Lever1. For forward rotation, push the fwd/rev lever hard left. For reverserotation push fwd/rev lever to the right.678FWDREV2. Insert thedrill bit,making sureit is centredin the jaws.Variable Speed Trigger1. To start drilling squeezethe variable speedtrigger.2. To stop drilling releasethe trigger.2. KEYLESS CHUCK3. Tightenthe chuckjaws.Adjusting TorqueTurn torque ring to the desiredsetting. Refer to Helpful Tips fordeterming desired setting.2. KEYLESS CHUCK4. Pull on the bit toensure it is firmlysecured.Speed ControlThe gear selector controls the speed of the drill. First gear allowsslower drilling with more torque, while second gear is suitable whenless power but higher speed is required.1. Slide the switch backwardto select first gear.2. Slide the switch forward toselect second gear.Removing Drill Bit2. KEYLESS CHUCK1. Fully openthe chuckjaws thenpull out drillbit.ab