PRODUCT MONOGRAPH IMITREX DF IMITREX ... - GlaxoSmithKline

IMPORTANT: PLEASE READFigure 1• The cartridge pack is in the right position when the bluebuttons show through the holes in the carrying case. Close thelid.How to Load the IMITREX STATdose Pen ® AutoinjectorDo not load the IMITREX STATdose Pen ® autoinjectoruntil you are ready to give an injection.How to Load the Cartridge Pack• Open the lid of the carrying case. The IMITREXSTATdose Pen ® autoinjector is already in its place(see Figure 2).Figure 2• Open the carrying case.Note: Do not use a syringe cartridge if the tamper-evident sealis broken or missing.• Remove the tamper-evident seal from one container of thecartridge pack. Discard the seal and open the cartridge lid (seeFigure 4).Figure 4• Remove the cartridge pack from its package. DONOT REMOVE THE TAMPER-EVIDENT SEALS.Push the cartridge pack and smoothly slide thecartridge pack into the carrying case, clicking it downinto place (see Figures 3a and 3b).Figure 3aCAUTION: DO NOT TOUCH THE BLUE BUTTONON TOP OF THE IMITREX STATdose Pen ® UNTILREADY TO INJECT.• Grasp the IMITREX STATdose Pen ® by the ridges at the top(see Figure 5). Take it out of the carrying case.Figure 5Figure 3bNote: The spring mechanism in the IMITREX STATdose Pen ®is primed and ready for use when you take the IMITREXSTATdose Pen ® out of the carrying case. If the white plungerrod is sticking out from the lower end of the IMITREXSTATdose Pen ® , put the IMITREX STATdose Pen ® back intothe carrying case and press down firmly until you feel it click.Remove from the carrying case.• To load the syringe cartridge, insert the IMITREX STATdosePen ® into the cartridge pack and turn clockwise until it nolonger turns (about half a turn)(see Figure 6).October 21, 2014Page 49 of 58