Monorail - LBL Lighting

More documents

Recommendations

Info

Monorail Connectorsstraight conductiveStraight conductive connectors join sections of Monorail together. (Pair.)Included with each piece of rail.straight isolatingStraight isolating connectors join sections of rail and isolate one powered run fromanother. (Pair.) These are typically used to separate one circuit from the other circuitwhen using surface or remote dual-feed transformers and to separate multipletransformers on a continuous run. Included with dual-feed surface transformersand power feed canopies. (See pp. 241-243.)Straight Conductive (Pair)modelBZ-M bronzeSC-M satin nickelfinishSCONNECTOR SC-MISOCONNECTORCL-MStraight Isolating (Pair)adjustable angle conductiveThese connectors join sections of rail together allowing subtle to sharphorizontal angles. (Pair.)“t” conductiveThese conductive connectors join three sections of Monorail together to create a “T”.(Pair.) We recommend standoffs are placed no more than 6" away from the connector.Adj Angle Conductive (Pair)“T” Conductive (Pair)modelBZ-M bronzeSC-M satin nickelfinishACONNECTOR BZ-M35 °minmodelBZ-M bronzeSC-M satin nickelfinishTCONNECTOR SC-Mend capsDecorative metal cap to give finished look to the ends of Monorail. (4 pc. set.)“x” conductiveThese conductive connectors join four sections of Monorail together to create afour-way intersection. (Pair.) We recommend standoffs are placed no more than 6"away from the connector.End Caps (Set-4 pcs)“X” Conductive (Pair)modelENDCAPS-BZ-M bronzeSC-M satin nickelfinishSC-Madjustable angle vertical connectorThese connectors join sections on Monorail together allowing subtlevertical angles.modelBZ-M bronzeSC-M satin nickelfinishXCONNECTOR BZ-MmodelBZ-M bronzeSC-M satin nickelfinishVCONNECTOR BZ-Mlbllighting.comMONORAIL237
Monorail StandoffsRecommended every 3 feet. Versatile, telescoping standoffs allow you to choose your hanging method and height.telescoping rigid standoffsRigid standoffs offer multifunction ceiling mounting in one part. Uniquetelescoping height adjustment and rotational head insert simplifies andperfects your installation. Self-drilling drywall anchor included with allstandoffs. NOTE: When mounting on concrete ceiling or wall, order oneSCW-MASONARY-A per standoff.modelBZ bronzeSC satin nickelfinishHANGER-ADJ- SC -1*When using with any surfacemounted transformer, rail cannotbe installed directly below thetransformer.-1 2.5"-4"*-2 6"-10"-3 12"-24"-4 24"-48"-5 48"-96"Rotating head insertallows fine tuning of railaxis position and fixtureorientation.NOTE: Specify Surface MountedTransformer or non-Direct PowerFeed Canopy with Adjustable Cableor Telescoping Rigid Standoffs.Referto pp. 241-242.adjustable cable standoffsClean looking and fully adjustable cable standoff for ceiling mounting.Griplock allows for easy one-touch shortening or lengthening in the field.Offered in four stock lengths. Additional custom length cable can bespecified. Self-drilling drywall anchor included with all standoffs.modelBZ bronzeSC satin nickelfinishHANGER-CBL- BZ -6-6 6’ of cable-8 8’ of cable-18 18’ of cable-25 25’ of cabledirect feed telescoping rigid standoffsUniversal telescoping standoffs offer adjustability and simplified ordering.Universal for all single-circuit direct feed surface transformersexcept 60w electronic flush.modelHANGERDIRADJBZ1 bronzeSC1 satin nickelfinishSC1NOTE: Specify Direct Feed SurfaceTransformer or Direct Power FeedCanopy with Direct Feed TelescopingRigid Standoffs. Refer to pp. 241, 243.Universal for all single-circuit direct power feed canopiesand 60w electronic flush direct feed surface transformer.modelHANGERDIRRCBZ1 bronzeSC1 satin nickelfinishSC1MONORAIL238
Page 4 and 5: MonorailRemote TransformerSingle-Fe
Page 12 and 13: Direct Feed Monorail Surface Transf
Page 14: Pre-Configured Monorail KitsSoft Cu

Monorail - LBL Lighting

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?