TWIN TUB WASHING MACHINE - ServiceMatters.com

Trouble shooting chartS.NO PROBLEM POSSIBLE CAUSE REMEDY1 Shock/Current Leak Earth Not Proper Connect ProperEarthing2 Machine Not Functioning No Supply At The Power Point Check ElectricalSupply At SocketPlug Switch Is Not On Switch On The PlugBlown Up FuseReplace FuseDefective Power Cord Refer CCG *Defective Wash Timer Refer CCGDefective CapacitorRefer CCGDefective Drive AssyRefer CCGDefective Drive BeltReplace3 No Drain Drain Hose Hooked On Place The Drain HoseMachineAt Ground LevelKinked / Clogged Drain Hose Remove / CleanDrain Valve Control Wire Reconnect DrainDislodgedWireControl Cable CutReplace CableClogged Drain ValveClean Drain Valve4 No Agitation Wash Timer Defective Refer CCGWash Motor Defective Refer CCGDrive Belt CutReplace Drive BeltDefective Drive AssyRefer CCGDefective CapacitorRefer CCGWire DiscontinuityRectify5 One Side Agitation Defective Wash Timer Refer CCGDefective Wash Motor Refer CCGDefective Drive AssyRefer CCG6 Noisy Agitation Loose Drive Belt AdjustDefective Drive AssyRefer CCGLoose AgitatorFix The AgitatorProper lyDefective Wash Motor Refer CCG7 Leak During Drain Defective Drain Valve Refer CCGPunctured Drain Hose Replace8 No Spin Lid Open Close LidDefective Lid SwitchReplaceDefective CapacitorRefer CCGDefective Spin MotorRefer CCGImproper BrakeAdjustDefective Brake Cable Replace9 Noisy Spin Defective Spin Basket ReplaceLoose Coupling BoltTightenLoose Basket ShaftTightenDefective Spin MotorRefer CCG* CCG is the Component Check Guide table in the next pageDoc No. WOI/washer/2001/009 Page No 17Modified on date 03/08/2001Subject to modification