Data Center Electrical Protection Solutions
Data Center Electrical Protection Solutions
Data Center Electrical Protection Solutions
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DATA CENTER ELECTRICAL PROTECTION<br />
ERITECH ® Signal Reference Grid<br />
SRGBD100 2” x 26 Gauge Copper Strip, 2’ x 2’ Grid Spacing, 10’ x 100’ Roll<br />
SRGBE100 2” x 26 Gauge Copper Strip, 2’ x 2’ Grid Spacing, 12’ x 100’ Roll<br />
SRGs can also be custom manufactured to suit your needs. SRG Part Numbering System:<br />
Grid Spacing<br />
B = 24”<br />
C = 48”<br />
F = 12”<br />
SRG<br />
ERITECH SRG Connector<br />
SRGC46 Mechanical SRG Connector, #4 and #6 Solid and Stranded Conductor<br />
SRGC46BR Pedestal Mounting Bracket for SRGC46<br />
EK16 Ground Clamp, #10 - #2 conductor. Use on round and square pedestals up to 1”<br />
ERITECH Direct-Burial Grounding Clamps<br />
EK16 & EK17 Ground Clamps, #10 - #2 conductor. Use on pipe up to 1”, ground rods up to 1”, Rebar #4 to #8,<br />
Rated for Direct Burial.<br />
RC70 Heavy-Duty Rebar Clamp, #8 - 2/0 AWG Conductor, #3 -#6 Rebar<br />
RC100 Heavy-Duty Rebar Clamp, #8 - 4/0 AWG Conductor, #6 -#11 Rebar<br />
ERITECH Water Pipe Clamps<br />
CWP2JU Bronze Pipe Clamp 1-1/4” to 2” pipe, #10 - 2 AWG<br />
CWP4JU Bronze Pipe Clamp 2-1/2” to 4” pipe, #10 - 2 AWG<br />
Telecom Main Grounding Bus Bars (TMGB) &<br />
ERITECH<br />
Telecom Grounding Bus Bars (TGB)<br />
TGBA14L06PT, TGB, 2” x 1/4” x 12”, Tin-plated copper, EIA/TIA Standard<br />
TGBA20L12PT, TGB, 2” x 1/4” x 20”, Tin-plated copper, EIA/TIA Standard<br />
TGBA25L14PT, TGB, 2” x 1/4” x 24”, Tin-plated copper, EIA/TIA Standard<br />
TMGBA14L15PT, TMGB, 4” x 1/4” x 12”, Tin-plated copper, EIA/TIA Standard<br />
TMGBA20L27PT, TMGB, 4” x 1/4” x 20”, Tin-plated copper, EIA/TIA Standard<br />
TMGBA25L33PT, TMGB, 4” x 1/4” x 24”, Tin-plated copper, EIA/TIA Standard<br />
*Remove “T” suffi x for untinned (plain) copper. Contact ERICO ® for other sizes and confi gurations.<br />
ERITECH Copper-Bonded Ground Rods<br />
615880, Copper-bonded Ground Rod, 5/8” x 8’<br />
615800, Copper-bonded Ground Rod, 5/8” x 10’<br />
613480, Copper-bonded Ground Rod, 3/4” x 8’<br />
613400, Copper-bonded Ground Rod, 3/4” x 10’<br />
In addition to the above grounding, bonding and SRG products, ERICO can provide design assistance to protect your data center,<br />
including the proper selection of CRITEC power and data surge protection devices, CADWELD exothermic connections to suit individual<br />
grounding system requirements and the design of a lightning protection system to comply with any lightning protection standard<br />
worldwide. Please contact ERICO or an authorized factory representative for further information.<br />
WARNING<br />
ERICO products shall be installed and used only as indicated in ERICO’s product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from<br />
your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO’s instructions and warnings may cause product<br />
malfunction, property damage, serious bodily injury and death.<br />
Copyright ©2008 ERICO International Corporation. All rights reserved.<br />
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.<br />
Phone: 440-248-0100<br />
Fax: 440-248-0723<br />
www.erico.com<br />
Width<br />
A=4’ B=6’ C=8’<br />
D=10’ E=12’ F=14’<br />
G=16’ H=2’ J=3’<br />
K=5’ L-7’ M=9’<br />
Grid Spacing<br />
Length in Feet<br />
(3 Digits)<br />
E774B-WWEN E1347LT07WWEN 00317M8