Compressed Air and Inert Gas Piping Systems - Aetna Plastics ...

CompressedAir andInert GasPiping SystemsI N D U S T R I A L S Y S T E M STHE PERFORMANCE OF PLASTICWITH THE STRENGTH OF METAL• 3/8”, 1/2”, 3/4” and 1” sizes• Operating Pressures 200psi at 73ºF,160psi at 140ºFWe build tough products for tough environments ®

THE DURATEC ADVANTAGEDuratec is an innovative compressed air and inert gas distributionsystem designed to be absolutely leak-proof, installed quickly andeasily, and maintained cost-effectively. As a result, Duratec savesyou time and money.Traditional metallic compressed air systems are a main cause ofunnecessary energy use, excessive wear and tear on compressorsand high consumption of compressor oils and filters. The culprits?Corrosion and leakage at pipe joints and fitting connections whichoften go undetected until they’re discovered during a detailedcompressed air system audit.Duratec pipe comes in long 100 foot or 300 foot coils, whichsignificantly reduces the number of joints in your system. Duratecfittings feature unique double o-ring seals to ensure long-termjoint integrity. And the entire Duratec system can be easily andquickly installed, modified or expanded without the need forspecialized equipment.ANSI / ASTM F1282CSA B137.9FDA CompliantNational CRNOA02020.2CHDPEAluminumHDPECSA B51, B137.9ASTM F1974ASME B31.3, B31.9Certified to OSHASafety Regulations

FEATURES & BENEFITS✔✔✔✔✔✔LOW INSTALLATION COSTSDuratec reduces costs on a typical installation not onlyfor materials but also for labour and transportation costswhen compared to traditional materials. How? Duratec’slightweight construction and simple assembly procedureswhich include:Ease of HandlingDuratec is 75% lighter than the equivalent diameterof copper and SCH 40 carbon steel.Quick Removable ConnectionsThreading is not required. All joints have double o-ringseals and can be quickly assembled or disassembled. Easyon-site modifications and repairs can be made.Quick InstallationNo special training or equipment is required tocomplete a Duratec system.Fewer FittingsDuratec pipe comes in convenient 100 ft. and 300 ft.coils eliminating several joints and the need for threading,or soldering.Flexible Yet RigidDue to its composite structure, Duratec pipe can beeasily bent by hand and will maintain its desired shape.This unique feature allows for straight, professionallooking installation and eliminates sagging.LOWER OPERATING COSTSDue to Duratec’s advantages over metal systems, it costsyou less time, labour and money to keep a Duratec systemin optimal condition.Pressure loss means money lossMetal systems can lose pressure due to pin-holeleaks and leakage at connections, all of which resultin increased energy costs. Duratec’s high-qualityconstruction, on the other hand, guarantees consistentpressure for years to come.✔✔✔EXTENDED LIFEDuratec is designed not to rust, scaleor pit. Once properly selected for theapplication and correctly installed,Duratec Airline Systems will provideyears of maintenance-free servicebecause they are:Corrosion ResistantDuratec’s tough outer HDPE layer protects it againstcorrosion and deterioration and ensures long service lifeeven in the most aggressive manufacturing environments.Its inner HDPE layer is unaffected by inert gases andcommonly-used compressor oils. Combined with itsindustrial nickel-plated Duratec fittings, the systemprovides long-term performance superior to metal pipingsystems.CleanAll Duratec pipe is packaged in cardboard boxespreventing contamination before use. The smooth HDPEinner layer cannot rust, corrode or form loose scale.Clean air remains clean throughout the life of the system.SafeDuratec’s unique composite construction means thataccidental impact or puncture of the pipe results in a safe,ductile mode of failure. Duratec pipe has been third-partytested and certified to stringent OSHA safety requirementsfor compressed air systems, standards that guaranteesafety comes first.IPEX engineered Duratec pipe and fittings to providetop-notch performance. Rated for long term continuousoperating pressures of 200psi at 73ºF and 160psi at140ºF, Duratec pipe and fitting assemblies are alsocapable of sustaining quick burst pressures in excessof 800psi. This built-in safety factor ensures systemperformance and provides peace of mind for designersand facility managers.✔Smooth InteriorLess friction means lower pressure drops and higher flowrates. This may allow for smaller pipe sizes to be used.

THE BEST OF METAL AND PLASTIC COMBINEDDuratec is an innovative new compressed air and inert gas piping product that uniquelycombines all of the benefits of plastic and metal in one pipe. Constructed of an inner andouter layer of HDPE sandwiched over an aluminum core, Duratec not only extends the lifeof the system, but significantly reduces leakage, saving you time, labour and operating costs.ALUMINUMHDPE• Rigidity• No memory – "stays where it lays"• High mechanical strength• High temperature capability• High pressure capability• Permanent permeation barrier• Low expansion and contraction• Lightweight• Corrosion proof• Flexibility• Ease of installation• Improved air/gas quality• No scaling• Condensation resistance