SB-83i Manual-2010 - Fellowes

AUTOAUTOAUTOAUTO1717AUTOAUTO1718AUTO17AUTOAUTO18AUTO1817AUTOAUTO1818AUTOAUTO18AUTOBASIC SET UP AND SHREDDING OPERATIONCASTER INSTALLATION12345PAPER OR CD/CARD1 2 3123456Continuous operation:20-minute maximumNOTE: Shredder runs brieflyafter each pass to clear entry.Continuous operation beyond20-minutes will trigger40-minute cool down period.1 2 3Plug in and put Press ( ) ON to Feed paper straight into To shred CDs rotatedisconnect power 1 activate (blue) 2 paper entry and release CD flap into 3placeswitch in ON (I) position1 2 3Hold CD/card at edge,feed into CD/Card flapentry and release1 2 3When finishedshredding setto OFF ( )JAM PROOF SYSTEM OPERATION*Eliminates frustrating jams by preventing overloads and powering through misfed paper.SET-UP AND TESTINGMISFED PAPER2323AUTO1If too many sheets, indicator willlight up to red and shredder willnot take paperAUTORemove several sheets until theindicator is below red and theshredder will take the paperAUTO1Automatic correcting actionwill power through the misfedpaper, so shredding cancontinue (do not add morepaper during flashing)If Remove Paper icon ( ) isilluminated, press reverse andremove paperFeed into paper entryand release23If paper is misfed andstops shredding, allindicator lights willilluminate and shredderwill pause for 3-6seconds23Shredder will take fewer sheets,but if indicator is below yellow,you can add more sheets withoutfear of jammingIncrease the number of sheetsbeing fed up toAUTOthe top yellow lightto maximize your productivityAUTOAUTO*100% Jam Proof when used in accordance with user manualIf there is too much paper forthe shredder to power through,it will reverse the paper out foreasy removalReduce paper quantity to anacceptable amount and refeed intopaper entry3