Design covers made of solid stainlesssteel class K 3 / L 15, with or withoutLock & Lift locking systemCover can be tiled (invisible)class K 3, with locking systemVariable upper sections:Lock & Lift system:Locking and removaldevice at the same timeOdour trap for all upper sectionsavailable as accessory.Sealing water height 50 mm inacc. with standardMultistop: Ideal odourtrap for drains that dryout frequentlyStainless steel frame132 mmMultiple award-winning design coversRemovable hair filterFire-protection insert Fire-Kitfor Ecoguss/Practicusdrain bodies withvertical outlet andodour trapOdour, foam and rodentstop for retrofittingDesign coversAdvantages at a glancesystem overviewCombination possibilities design and technologyA large selection of design covers including drain bodies,waterproof sealing flanges and accessories.On the right you will find an overview of the combinationpossibilities for the <strong>KesselDesign</strong> upper sections combinedwith KESSEL drainage systems.20 | 21
System overview design covers / drains System 125<strong>KesselDesign</strong> upper sections with design cover... choice of eight design covers made of solid stainless steel or one design cover that can be tiled over:Kessel Oval Spot Cross Festival Parade Slot SticksInvisible1 Upper sectionmade of ABS,2frame 132 mmVariofix shallow bed upper sectionmade of ABS, frame 132 mm,flange Ø 312 mm12with Lock & Liftwithout Lock & Liftwith Lock & Liftwithout Lock & Lift48 20148 22548 90448 62548 20248 22648 90548 62648 22148 22048 62148 62048 21348 21248 61348 61248 21548 21448 61548 61448 22448 22348 62448 62348 21948 21848 61948 61848 21748 21648 61748 61648 211-48 906-AccessoriesMultistopRodent, foamand odourstop48 500Hair filtermade ofpolymer48 700Fire-protection insert Fire-Kitonly for vertical drains Ecoguss /Practicus with odour trapØ 58/78/83 or 50/75 48 099Ø 110 48 100Glue flange made of ABS,with counter flange, Ø 348 mm,(also for composite seal)48 410Pressure sealing flangemade of stainless steel,Ø 273 mm48 402Note: can be combined with drain body and extension section 48 989, 48 987Extension sectionmade of PP,with lip seal• with inlet 48 989• without inlet 48 987Quick-Fit the passage sealfor core drillings for Ecoguss / Practicusdrain bodies with vertical outlet• with fire protection 48 990• without fire protection 48 991Drain bodies„The Ultraflat“ made of ABS,lateral outlet Ø 50 / Ø 751.0 l/sec flow rate,with odour trapsealing water height 30 mmØ 50 45 700Ø 75 45 770„The Ultraflat“ made of ABS,lateral outlet Ø 50,lateral inlet Ø 401.0 l/sec flow rate,with odour trapsealing water height 30 mm45 701„The Vertical“ made of ABS,vertical outlet Ø 50/40,1.2 l/sec flow rate,with odour trap for fittingin upper sectionsealing water height 50 mm45 254Ecoguss, with odour trap,1.8 l/sec flow rate, sealing water height 50 mmØ587883110Lateral outlet48 35848 37848 38348 311Vertical outlet48 45848 47848 48348 411Practicus made of PP, with odour trap,1.8 l/sec flow rate, sealing water height 50 mmØ Lateral outlet Vertical outlet5075-11045 15045 170-45 11045 25045 270-45 210