instructions for use creation classic gingiva ceramics - Jensen Dental

More documents

Recommendations

Info

DENTINE FIRING AND 2. BUILD-UPDENTINE FIRINGThe dentine firing takes place at 920 °C under vacuum (seefiring chart p. 10). Reliable proof of a correct firing cycle canonly be produced by visual checking after the firing.If the appearance is as in the illustration, the firing cycle wasperfect (slightly shiny).2. BUILD-UPCompleting the white aesthetics.Completing the pink aesthetics.G3G5G4Complete thin overlaying of the pink aesthetics withG3-light pink.Individual characterisation of the gingival margin, labial andbuccal frena with G5-rose and for lighter areas withG4-flamingo.6
CORRECTION- AND GLAZE FIRING1 st CORRECTION FIRINGThe correction firing takes place at 910 °C under vacuum(see firing chart p. 10).G42 nd CORRECTION FIRINGThe 2 nd correction firing takes place at 910 °C under vacuum(see firing chart p. 10). Final corrections to the tooth shapeand corrections to the gingiva are possible with G4-flamingo.GLAZE FIRINGSee the firing chart page 10.Discolorations on the tooth surface or in the gingival can bemimicked in a life-like way with Creation CC.AV. Make Up(marking an glazing) or with Creation CC.LF. Make Up Instant(glazing and fluorescent).7
Page 1 and 2: CREATION WILLI GELLER INTERNATIONAL
Page 3 and 4: INTRODUCTIONPINK AND WHITE IN PERFE
Page 5: OPAQUE AND 1. BUILD-UPGingiva Opaqu
Page 9 and 10: COLOUR CHARTPowdersGingiva-KitG-1pu
Page 11 and 12: PHYSICAL PROPERTIESProperties Measu

instructions for use creation classic gingiva ceramics - Jensen Dental

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?