A.F.A. Rasid, M.J. Ghazali, T.I. Mohamad & W.M.F.W. Mahmood, 2011, Regional TribologyConference 2011, Langkawi, Malaysia, Pressure Behaviour Of Lubricant Oil During EngineOperation Wan Mohd Faizal Wan Mahmood, Paul J. Shayler, Antonino La Rocca, and FabrizioBonatesta, 2011, Regional Conference on Automotive Research (ReCAR) 2011, KualaLumpur, Prediction of In-cylinder Soot Particles Paths in a DI Diesel Engine, Y. Istihat, M. Z. Nuawi, A. R. Bahari and W. M. F. W. Mahmood, 2011, Regional Conferenceon Automotive Research (ReCAR) 2011, Kuala Lumpur, Malaysia, <strong>Development</strong> ofUltrasonic Test Rig System for Fuel Injector, Wan Mohd Faizal W.M., Mohd Anas M.S., Mohd Faizal M.T., Azli A., Rozli Z., Nordin J.,Sallehuddin M.H., Rizauddin R., Shahrum A., Shahrir A. and Azhari S., 2011, RegionalConference on Automotive Research (ReCAR) 2011, Kuala Lumpur, Malaysia, Car Bodyand Chassis <strong>Development</strong> of UKM CARevo for Perodua Eco-Challenge 2011, Azali Awaludin, Mohd Zaki Nuawi, Yusoff Ali, Wan Mohd Faizal W.M and Taib IskandarMohamad, 2011, Regional Conference on Automotive Research (ReCAR) 2011, KualaLumpur, Malaysia, A study on Alternative Fuel Blending for Homogeneous ChargeCompression Ignition (HCCI) Engine using Palm Oil Methyl Ester and RON 97, Javad Zareei, Yusoff Ali, Shahrir Abdullah and Faizal Wan Mahmood, 2011, RegionalConference on Automotive Research (ReCAR) 2011, Kuala Lumpur, Malaysia,Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in aSpark Ignition Fueled with Gasoline and CNG Wan Mahmood, W.M.F., Bonatesta, F., La Rocca, A., Shayler, P.J. 2008. CFD studies of IncylinderSoot Particle Trajectories of a Diesel Engine. International Conference onEnvironment 2008. G Hotel, Pulau Pinang, 15-17 December 2008. Sopian K., Othman M.Y., Yatim B., Daud W.R.W., Ali Y., Abdul Rashid Z.A., Abdullah S.,Ibarahim Z., Ruslan M.H., Mohd Zain M.F., Md. Darus Z., Surat M., MohdTahir, M, NikIbrahim N.L., Zainal Abidin Z., Wan Mahmood W.M.F, Yusof Y., and Che Wanik M.Z. 2004.Sustainable And Environment Friendly Solar Energy Technologies Research And<strong>Development</strong> In Universiti Kebangsaan Malaysia. National Conference in EngineeringTechnology 2004, Universiti Malaya, Kuala Lumpur, Malaysia. Jan-Dirk Herbell, Christoph Pasel, Abdul Halim Shamsudin, Wan Mohd Faizal Mahmood,2003, Environmental Protection Technology for Cities, The 3rd International Conferenceon Advances in Strategic Technologies (ICAST), UKM Bangi, Malaysia, pp 143-148. Wan Mohd Faizal Wan Mahmood, Zahari Ibarahim, Kamaruzzaman Sopian, Wan RamliWan Daud, Mohd Yusof Othman, 2003, Design Concept of an Environmental FriendlySolar Hydrogen Eco-House, The 3rd International Conference on Advances in StrategicTechnologies (ICAST), UKM Bangi, Malaysia, pp 975-980. Petir Papilo, Kamaruzzaman Sopian, Wan Mohd Faizal Wan Mahmood. 2003. AnalisisPrestasi Sistem Pengeringan Penyahlembapan Terbantu Suria, Prosiding Penyelidikandan Pengembangan 2003 JKMB, UKM Bangi, Malaysia, pp 303-308. Wan Mohd Faizal Wan Mahmood, Zahari Ibarahim, Kamaruzzaman Sopian, Wan RamliWan Daud, Mohd Yusof Othman, 2003. c. Prosiding Penyelidikan dan Pengembangan2003 JKMB, UKM Bangi, Malaysia, pp 317-322. Nishida, O., W.M. Faizal, W.M., Asano, J., Fujita, H., Harano, W., Matsui, K. 2001.Characteristics of Spray Particles by Proportional Control Nozzles. The 66 th Symposium ofThe Japan Institution of Marine Engineering, Kobe, pp 97-100.
Books: Nishida, O., W.M. Faizal, M., Asano, J., Fujita, H., Harano, W., Matsui, K. 2001 AtomizationImprovement by Spray Impingement of Air-assist Atomizer. The 3 rd InternationalSymposium on Measurement Techniques For Multiphase Flows, Fukui, Japan. Nishida, O., Fujita, H., Harano, W., Asano, J., W.M. Faizal, W.M., Matsui, K. 2000.Atomization Characteristics For Mini Combustion Chamber. 2 nd Japanese-EuropeanTwo-Phase Flow Group Meeting, Tsukuba, Japan. Shahrir Abdullah, Wan Mohd Faizal Wan Mahmood, Jaharah A. Ghani, Mohd Hanif MdSaad, Zulkhairi Zainol Abidin. 2003. Prosiding Penyelidikan dan Pengembangan 2003, ,Penyunting, , Cetakan Pertama, 377, Jabatan Kejuruteraan Mekanik dan Bahan,Universiti Kebangsaan Malaysia, Bangi, Selangor. ISBN 983-2975-03-4.Technical Reports:Poster:Thesis: Report on Biomass Services and Awareness Enhancement Programme:Component 1: Biomass Energy Technology Expert (RE Syllabus). Julai 2004. AbdulHalim Shamsuddin, Wan Mohd Faizal Wan Mahmood, Rakmi Abdul Rahman, UKMPakarunding Shahrir Abdullah, Noorhisham Tan Kofli, Noraini Hamzah, Wan Mohd Faizal WanMahmood, Yushaizad Yusof & Zaharah Zainal. 2005. Laporan PencalonanAnugerah Kualiti Naib Canselor 2005 Nishida, O., Fujita, H., Harano, W., Asano, J., W.M. Faizal, W.M. 2001. Spray Behaviorof Oil Pressurized Nozzle. Joint Forum of Technology Exchange Organization andIndustry-University Cooperation Society, Kobe, Jepun Wan Mohd Faizal Wan Mahmood, 2011, “Computational Studies of Soot Paths toCylinder Wall Layers of a Direct Injection Diesel Engine”, PhD Thesis. The Universityof Nottingham, Nottingham, United Kingdom. Wan Mohd Faizal Wan Mahmood, 2002, “The Effects of Spray-to-SprayImpingement on Droplet Behavior”, M.Sc Thesis. Kobe University of MercantileMarine, Kobe, Jepun.SHORT COURSE ATTENDED Biogas Utilisation Training, Hotel Mariott, Putrajaya, 28 Feb- 2 Mac 2006 Biomass Energy Technology Training: Biomass Power Generation and CogenerationProject Training Phase 2, Residence Hotel Bangi, organized by Malaysia Energy Centreand UNDP. 20-21 Dec. 2005 Biomass Energy Technology Training: Biomass power Generation and CogenerationProject Training Phase 1, Residence Hotel Bangi, organized by Malaysia Energy Centreand UNDP, 5 – 6 Dec. 2005 Seminar on Building Energy Efficiency Best Practices in South East Asia, 18 Mei 2005