Instruction and Safety Manual - Ameristep

TAKE-DOWN INSTRUCTIONSTHE OUTHOUSE ! Tip:Tip: Be sure to remove all native brush, dirt and debris BEFORE beginning take down. Remove Ground Stakes.Model #804BLINDSTEP 1:Remove all ground stakes and high wind tie-downs.Fold blind in half laying it flat on ground.STEP 2:Roll BOTTOM AWAY from your body,towards the ground.STEP 3:Continue to roll BOTTOM SECTION until it almost touches top of BLIND,forming a “U” Shape.STEP 4:Once “U” Shape is formed remove onehand and rotate it 180º (degrees) (Righthand counterclockwise or left hand counterclockwise)STEP 5:Continue to ROLL BOTTOMover until it nearly touches TOPof BLIND.STEP 6:Now begin to ROTATE HAND inOPPOSITE direction 180º(degrees). This will bring BOTTOMPORTION of BLIND towards you.STEP 7:Be sure to overlap TWO STEEL BANDS CLOSEST toyour legs, the BLIND should collapse with ease.Pack ground stakes, and high wind tie-downs in thepouches provided. Store them with your Ameristep®Blind for your next hunting adventure.Insert BLIND into its carry case.NEW ! “From the Ground Up” Instruction DVD included withthis product. If you need further instruction on set up / take down,please refer to Instructional Chapter on the Main Menu.©2008(rev 4/08) PLEASE NOTE: Images used are for demonstration purposes only and may not depict the actual product.Page 3Ameristep® Inc. 901 Tacoma Ct. • P.O. Box 189 • Clio, MI 48420 (810) 686-4035 www.ameristep.com