<strong>SYSTEM</strong> <strong>ACCESSORIES</strong>2 & 3 Way Control ValvesModel Description HydraulicSchematicVP2VP3Pump mounted, 2 position, 2 way valve is idealfor pressing, punching, crimping, staking orpulling applications when load holding is notneeded.Pump mounted, 3 position, 3 way valve iscommonly used with single-acting cylindersfor lifting applications or production work. Thecenter position holds the load with the pumpmotor on or off.PPTTFunctional FlowSchematicAdvanceRetractPPPAdvanceTHoldTTVPL3Pump mounted, 3 position, 3 way valve is thesame as VP3, but with a built in pilot checkvalve. The VPL3 provides positive load holdingin the center position, and will not allowpressure drop while shifting. Recommendedfor prestressing, post tensioning and precisionholding applications.PTPP TRetractTaccessoriesVPS31VPSL31Pump mounted, electric solenoid actuated,3 position, 3 way valve with remote pendantswitch allows remote operation of systemdirectional control.For 230V, Use Model Number VPS32Pump mounted, electric solenoid actuated,3 position, 3 way valve with remote pendantswitch is the same as the VPS3, but with a builtin pilot operated check valve. The VPSL31provides positive load holding in the centerposition, and will not allow pressure drop whileshifting.For 230V, Use Model Number VPSL32PPTTP TAdvancePTP THoldPTP TRetractP TRemote Mounted Valves - For Single Acting Cylinders & ToolsVRM3 &VR3CCVRM3 is remote mounted, manual valve, 3position, 3 way tandem center.(reference VP3 schematic)VR3CC is remote mounted, manual valve, 3position, 3 way closed center.VR3CCPTPPTVRS31 &VRS31CCVRS31 is remote mounted, solenoid valve, 3position, 3 way tandem center.(reference VPS31 schematic)For 230V, Use Model Number VRS32VRS31CC is remote mounted, solenoid valve, 3position, 3 way closed center.For 230V, Use Model Number VRS32CCVRS31CCPT70 www.tksimplex.com