PNEUDRI - Air Energy Management

Advanced modular drying systemPNEUDRI MiDASand MIDIplus models• PNEUDRI MiDAS & MIDIplus models useonly single extrusions, with a pressuredie-cast inlet and outlet assembly• Compressed air capacity within theseranges is increased by varying thelength of the drying columns• The greater the flow required,the longer the drying columnPNEUDRI MAXI models• MAXI models use multiple dryingcolumns of equal length to providerequired compressed air capacity• The greater the flow required, themore drying columns are used(up to the maximum length of themanifold)Upper distributionmanifoldDrying columnsLower distributionmanifoldMulti-bankingUnlike the loose filled adsorbent bed of traditional twin tower dryer designs,PNEUDRI with it’s snowstorm filled adsorbent beds provides an equalresistance to air flow. Therefore, when the system flow of an installationexceeds the capacity of the largest single dryer model, PNEUDRI can bemulti- banked to meet the demand. Should demand increase in the future,there is no need to replace the dryer with a larger unit, additional capacitycan be covered by simply adding an extra bank or banks, a feature onlypossible with PNEUDRI.Flexibility during maintenanceMulti-banking of dryers enables individual banks to be easily isolated forroutine maintenance work. This means minimal interruption to your clean,dry air supply.100% stand-byCompared to traditional twin tower designs, 100% standby is availableat a fraction of the cost as only one extra dryer bank is required.Fits through a standard doorwayUnlike traditional twin tower designs, PNEUDRI dryers will fit through a standarddoorway, eliminating the need for special access or facility structural dismantlingduring installation.4