Model 2510 Piezoelectric microphone - Endevco

Model 2510Piezoelectric microphoneSPECIFICATIONSThe following performance specifications are typical values, referenced at +75°F (+24°C) and 100 Hz, unless otherwise noted.DYNAMIC CHARACTERISTICSCHARGE SENSITIVITY, TypicalRANGEFREQUENCY RESPONSERESONANCE FREQUENCYAMPLITUDE RESPONSE±1 dB±3 dBTEMPERATURE RESPONSEAMPLITUDE LINEARITY120 to 164 dB SPLELECTRICAL CHARACTERISTICSRESISTANCECAPACITANCEGROUNDINGUnitspC rms @ 140 dB SPL [1] 31pC rms/psi [2]1069pC rms/N/m 2 [3] 0.155dB re 1 pC rms @ 1 µbar -33.1dB SPL100 to >180See Typical Amplitude ResponsekHz30HzHzdB2 to 4 kHz1 to 10 kHzSee Typical Curve0.5M 20 000pF5200Case ground insulated from mounting bracket.Case isolated from mounting bracket by 1 M,minimumENVIRONMENTAL CHARACTERISTICSTEMPERATURE RANGEHUMIDITYVIBRATION SENSITIVITYUp to 2 kHzSINUSOIDAL VIBRATION LIMITSHOCK LIMITPHYSICAL CHARACTERISTICSDIMENSIONSWEIGHTCASE MATERIALCONNECTORMOUNTING TORQUECALIBRATIONSUPPLIED:CHARGE SENSITIVITYCAPACITANCEg pkg pkgm (oz)lbf-in (Nm)pC pk @ 140 dB SPLpC rms @ 140 dB SPLpF-67°F to +500°F (-55°C to +260°C)Hermetically Sealed< Output of unit at 105 dB SPL @ 1 g pk1501000See Outline Drawing57 (2.0)Stainless SteelCoaxial, 10-32 Type, Mates Endevco 3000 SeriesCables10 (1.1)ACCESSORIESModel 3090C-120 (10ft)Model EH303CABLE ASSEMBLYMOUNTING SCREW, 6-32, Two eachNOTES1. Reference: 0 dB = 0.0002 µbar rms (dyne/cm 2 rms) =20x10 -6 N/m 2 rms = 20 µPa rms.2. 140 dB SPL = 2.9x10 -2 psi rms.3. 140 dB SPL = 200 N/m 2 rms.4. Maintain high levels of precision and accuracy using Endevco'sfactory calibration services. Call Endevcoʼs inside sales forceat 800-982-6732 for recommended intervals, pricing and turnaroundtime for these services as well as for quotations on ourstandard products.Continued product improvement necessitates that Endevco reserve the right to modify these specifications without notice. Endevco maintains a program of constantsurveillance over all products to ensure a high level of reliability. This program includes attention to reliability factors during product design, the support ofstringent Quality Control requirements, and compulsory corrective action procedures. These measures, together with conservative specifications have made thename Endevco synonymous with reliability.©ENDEVCO CORPORATION. ALL RIGHTS RESERVED 30700 RANCHO VIEJO ROAD, SAN JUAN CAPISTRANO, CA 92675 USA(800) 982-6732 • (949) 493-8181 fax (949) 661-7231 • www.endevco.com • Email: applications@endevco.com0805APPLIES TO CALIFORNIA FACILITYcmyk