PADLOCKABLE :: Cam <strong>Lock</strong>DCP :: Padlockable Cam <strong>Lock</strong>General features:Function: Cam lock for use withpadlock as locking device. Functionson doors or drawers. Ideal for lockerapplications.Through-hole: 0.4"Padlocks: Available separately from<strong>Olympus</strong> <strong>Lock</strong>, Inc.Max. material thickness: 1-1/8"Barrel diameter: 3/4"Finish: US26, US3, US19Packaged: Packed 15 per boxIncludes:DCNP-500-ARP stabilizer plateDCP-SC straight 7/8" camDCP-LC straight 1-1/4" camSpacer ringOptional Accessories:See cams below.Padlocks:See <strong>Olympus</strong> <strong>Lock</strong>'s completeline of brass padlocks at theback of this catalog for usewith the DCP. Will also workwith most other manufacturer'spadlocks with shackle diameterof 3/8" (10 mm) or less.Includes:Part No. Finish Barrel DescriptionDCPDCP US26, US3, US19 1-7/32" Accepts most standard padlocks with ashackle diameter of 3/8" (10 mm) or lessAvailable Cams:Straight Cams:Part No. Dim. ADCP-58 5/8"DCP-SC** 7/8"DCP-LC** 1-1/4"DCP-LC-112 1-1/2"DCP-LC-134 1-3/4"DCP-LC-225 2-1/4"DCP-LC-250 2-1/2"**These camsship standardwith each lockTypical Door ConfigurationOffset Cams:Part No. Dim. A Dim. BDCP-1-14 1" 1/4"DCP-LBC 1-1/4" 1/4"DCP-118-18 1-1/8" 1/8"DCP-LBC-138 1-3/8" 3/8"DCP-LBC-178 1-7/8" 1/2"DCP-112-14 1-1/2" 1/4"<strong>Lock</strong>edpositionRemovepadlock toopen haspFront arm of haspwill swing downlifting camUnlockedposition22 206-362-3290 :: 800-525-0954 :: Fax 206-362-3569 :: www.olympus-lock.com
700S/800S :: Deadbolt <strong>Lock</strong>sSTANDARD CYLINDER :: Schlage StyleGeneral Features:Rekeyable: Easily rekeyable via setscrew cylinder release mechanismCertifications: Passed ANSI/BHMAA156.11 grade 1 cycle testing,obtained grade 2 performance for allother requirementsUS Patent Nos: 4,899,563;4,920,774Body: Zinc die cast lock bodyCylinder: Will accept othermanufacturer's Schlage compatiblekey-in-knob cylindersBarrel lengths: 1-1/8" or 1-3/8"Barrel diameter: 1-1/8"Finish: 26D, US3, 10BPackaging: Packed 10 per boxKeying Information:Keyway: Schlage C keywayCylinder: Solid brass pin tumblercylinderStock keying: KD/KA - 5 pin standardStock KA#: 101, 102, O-BitMasterkeying: 5 pin standard, 6 pinavailableKeyblank 5-pin: KBSC-5Keyblank 6-pin: KBSC-6Optional AccessoriesOptional Accessories:10-348 spacer (1/4" thickness)10-349 spacer (1/2" thickness)10-052, 12-2, 12-4 strikesTR78 trim ringReinforcing trim spacers ETS1, trimpull ETS1-PL and template ETST1 forthrough-bolt mount1-1/8 <strong>Lock</strong> Includes:10-350 plastic spacers (qty 2)10-054 1/4" plastic bar strike10-055 1/2" plastic bar strike1-3/8 <strong>Lock</strong> Includes:10-054 1/4" plastic bar strikeIncludes:700SDOOR10-0541/4" plastic bar strike700S/800S Standard Function10-0551/2" plastic bar strike10-350plastic spacers includedwith 1-1/8" locks800SDRAWERPart No. Handing Finish Cyl. Length Available Keying700S Non-handed 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102, O-BitCustom Keyed800S Non-handed 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102 O-BitCustom KeyedSpacersThrough-bolt platesStrikesTrim pullsSee the Accessories section for a complete listing ofoptional accessories.700S/800S Key-RetainingPart No. Handing Finish Cyl. Length Available Keying700KL LH Door 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102 O-BitCustom Keyed700KR RH Door 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102 O-BitCustom Keyed800KI IH Drawer 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102 O-BitCustom Keyed800KV VH Drawer 26D, US3, 10B 1-1/8" or 1-3/8" KD, KA 101,102 O-BitCustom Keyed800S / 800LC700S / 700LC206-362-3290 :: 800-525-0954 :: Fax 206-362-3569 :: www.olympus-lock.com23