Drytac Jetmounter Laminators

JetMounter Roller LaminatorsThe design of JetMounter roller laminators is theculmination of three decades of experience in themounting and laminating business. Equipped withthe performance features our customers demand,JetMounter roller laminators are unmatched for value.JetMounter JM63ProHeated top roller laminator gives maximum flexibility.The JM63 is a versatile wide-format roller laminator with roll to rollcapability at a price you didn’t think was possible. The addition of theheated top roller allows it to be used with Heatset and single-sidedthermal overlaminates as well as pressure sensitive laminates andadhesives.JM63ProJM63Pro SpecificationsMax Laminating Width 63”Max Nip OpeningUncrated WeightWidthDepthHeightRoller Diameter2” (5.08 cm)970 lbs. (440 kg)83” (210.8 cm)29” (73.7 cm) w/o table up32” (81.3 cm) w/ table up49” (124.4 cm)5.5” (13.97cm)Speed Range 0-13 ft/minute (0 - 4 m/minute )Power (U.S. and Canada)Power ConsumptionJM55Fuzion220V 50/60Hz, 13A Single Phase2700 WattsFeatures:• Top silicone roller has anadjustable temperaturerange from roomtemperature to 248 o F (120 oCelsius)• Effective laminating width of63” (1600mm)• Auto and foot pedaloperation modes• Speed control 0 - 12 ft(3.65m) per minute• Maximum 2” nip opening• Nip pressure indicator• Fold away front table• Heavy duty lockable casters• Two top mounted emergencystops• “Hold flat” paper in-feedguide• Large 5.5” diameter nonsticksilicone rollers• Self-checking photo cells forfinger protection• Top and bottom supplyshafts with brake tensioncontrol• Top and bottom wind-upshafts with adjustable clutchspeed.• Single mechanical height/pressure adjustment(No compressor needed)• Extra rear windup shaftdriver for rewinding roll to rollJetMounter JM55FuzionThe new JetMounter JM55Fuzion has many of the conveniencefeatures of the JM63Pro, with the smaller laminating width andprice point of a standard wide format roller laminator. Equippedwith top and bottom auto-grip supply shafts, rear and front take-upor feed shafts, and a heat-assist top roller, the JM55Fuzion is idealfor shops wanted to add roll to roll laminating capabilities at a lowerprice tag. Excellent for laminating vehicle wraps, creating windowdecals and mounting graphics to substrates. Built to the same qualityspecifications and engineering standards of all our JetMounterlaminators.JM55Fuzion SpecificationsMax Laminating Width 55”Max Nip Opening1” (2.5 cm)Uncrated Weight573 lbs. (260 kg)Width73” (185cm)Depth24” (61cm)Height48” (122 cm)Heat Assist Roller Yes (110 o F/43 o C)Roller Diameter5.5” (13.97cm)Speed Range2-10 fpm (0.6-3 mpmPower (U.S. and Canada)115VAC or 220V 50/60Hz,Single Phase