Torque wrenches - Ambitex

6Torque testers Electronic torque testerTorque controlElectronic torque testerE.5000GENERAL SPECIFICATION.• Operating range : 10 Nm to 1,100 Nm• Accuracy : +/- 1 % of reading over the entire reading range (digitincluded).• Displayed torque range : 2 to 1,210 Nm• 10 languages : IT, FR, GB, D, NL, E, PL, PO, DK, SW.• Units : Nm, daNm, cNm, kgf.m, lbf.in, lbf.ft.• 4 operating methods for all checking needs.• Prevention of main measuring errors (Zero and hysteresis).• Internal battery - average life 3 years.• Storage temperature : -20°C to 70°C• Operating temperature : 10°C to 40°C.• Sensitivity drift : 0.2 % per °C (included in the ± 1 %).• Ingress protection rating IP5 - EN 60592 (dust).• EMC CE : 89/336 CEI EN 50081-1 / CEI EN 50082-2.• Supply voltage : 115-230V / 50-60Hz.• Power consumption in operation 30-50 mA / 230V, on standby 15mA / 230V.SOFTWARE SPECIFICATION.• Storage of up to 500 measurements including date, time,method, unit and position.• Direct connection to a PC without special software.• System status information - Buzzer with five loudness settings.• 3 light signal operating options.• Customisation of working mode.FSizesDkgE.5000 155 x 260 x 240 mm 13CD.12 Test rig• Applies torque at a constant speed in accordance with ISO 6789requirements.• Adjustment of wrench angle vertically and horizontally to remainwithin the tolerances specified by the standard.• Metrological accuracy ensuring reliability of test results.• Easy application of torque.• Full rig comprises the base and the standard module.• Torque tester E.5000 not included.FCD.12-350CD.12-350BCD.12-1100CD.12-1100BCD.12-SMFCD.12-ADescriptionCompletetest rigTest rigbaseCompletetest rigTest rigbaseStandardmoduleCapacityN.mLmmlmmDkg5-350 1008 230 205 - 350 1008 230 13,265-1100 1558 230 275 - 1100 1558 230 19,77- 580 270 8,89DescriptionSpare parts302 www.facom.com