FHKU G1/2â 100 Ryton

More documents

Recommendations

Info

Measurement Curve FHKU G1/2“ 10.00 mm Medium: Water / max. Pressure: 3.3 barNozzle size Pulses/litre g/pulse min. flow rate max. flow rate Pressure lossin litres/min at in litres/minLinear startØ 10.00 mm 65 15.37 3.00 26.69 0.32The values specified must be considered as approximate values.The number of pulses per litre may differ depending on medium and installation.We recommend to calibrate the number of pulses per litre in line with the completeinstallation.MEASUREMENTTIPS• Ensure that there is no fast-pulsatorymovement of the media• Ensure that there are no reverse pressuresurges• Ensure that there is no air in the system• Note the mounting position of the flowmeter• Min/max flow should be in the linear rangeof the selected flowmeter• Clean the system at appropriate intervals• Avoid electrical current peaks• Incorrect cabling of power supply +, signaland ground will destroy the flowmeter• Do not mechanically load electrical contacts• Avoid moisture on the electrical contacts• Avoid stray pick-up via the cable (Do not laycables in parallel with high current loads)We reserve the right to make modifications in the interests of technical progress . Version 01 FHKU 938-6800/01 GB Page 4-5Digmesa AG, Keltenstrasse 31, CH–2563 Ipsach / Switzerland, Phone +41 (32) 332 77 77, Fax +41 (32) 332 77 88, www.digmesa.com
Spare parts:Inox A2 PT-screws # 443-0008(Phillips cross recessed)Upper section FHK Ryton # 532-0800O-ring Silikon # 350-0410Turbine FT 36 # 527-0303Lower section FHKU G1/2“ Ryton Ø 10.00 mm # 513-0021Notes:We reserve the right to make modifications in the interests of technical progress . Version 01 FHKU 938-6800/01 GB Page 5-5Digmesa AG, Keltenstrasse 31, CH–2563 Ipsach / Switzerland, Phone +41 (32) 332 77 77, Fax +41 (32) 332 77 88, www.digmesa.com

FHKU G1/2â 100 Ryton

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

FHKU G1/2â 100 Ryton