T Catalogue 2010 - Tridonic

U – LED modules, converters and systemsumoduleNEWUstrip P105-3 / P108-3ustrip, whiteProduct description• LED strip module for highlighting lines and edgesand for side injection• For safety lighting, general lighting, effect lighting and shelf lighting• Suitable for LED profile Z200-2 / 201-2 / Z204, Z22W-2• Edge injection of transparent or diffuse materials• With maximum possible beam angle for uniform illumination• Low-profile• Simple installation thanks to pre-fitted adhesive tape• Dimmable by pulse width modulation (PWM)• Integrated current source to stabilise luminous flux• Beam characteristic: 140°• Attached with premounted thermally conductivedouble-sided adhesive tape• Connection: Cable 200 mmÊÊFor product data sheet go to www.tridonic.com,or available on requestTechnical dataAmbient temperature ta -25 ... +50 °Ctc point1 80 °CÈProduct matrix, page 20Standards, page 20Colour temperatures and tolerances, page 132Ordering dataColourColourtemperatureTypeArticle number24 light points per moduleDaylight white 6,500 K P108-3 DL 89601052Neutral white 4,200 K P108-3 NW 89601051Warm white 3,000 K P108-3 WW 896010506 light points per moduleDaylight white 6,500 K P105-3 DL 89601049Neutral white 4,200 K P105-3 NW 89601048Warm white 3,000 K P105-3 WW 89601047Packaging ustrip P105: 20 pieces/cartonPackaging ustrip P108: 10 pieces/cartonSpecific technical dataType Typ. luminous flux 2 Colour rendering index Ra/Rff Supply voltage DC3 Power2 Total length24 light points per moduleP108-3 DL 204 lm 75 24 V 3.84 W 200 +/- 1 mmP108-3 NW 167 lm 80 24 V 3.84 W 200 +/- 1 mmP108-3 WW 146 lm 80 24 V 3.84 W 200 +/- 1 mm6 light points per moduleP105-3 DL 51 lm 75 24 V 0.96 W 50 +/- 1 mmP105-3 NW 42 lm 80 24 V 0.96 W 50 +/- 1 mmP105-3 WW 37 lm 80 24 V 0.96 W 50 +/- 1 mm1 If the max. temperature limits are exceeded, the life of the module will be reduced or the module may be damaged. The temperatureof the ustrip at the tc-point is to be measured in the thermally stable state. For tc-point see the above diagram.2 Tolerance range for optical and electrical data: ±15 %.3 Exceeding the max. operating voltage leads to an overload on the ustrip. This may in turn result in a significant reduction in lifetimeor even in destruction. Tolerance range for the supply voltage: 24 V: +2 V / -0 V.All values at ta = 25 °C.T Catalogue 2010www.tridonic.com 61