and Operating Manual User Guide

More documents

Recommendations

Info

ASSEMBLY INSTRUCTIONS1. Unpack your NuVita Infrared Light Therapy System.Your box will include the following:1. NuVita Infrared Light Panels (2 panels) 4. Panel Connector Wire2. NuVita Infrared Light Stand (3 pieces) 5. Velcro® Strap3. Power Supply and Cords 6. User Guide andOperating ManualFREQUENTLY ASKED QUESTIONSQuestion: What will I notice during and after treatment?1. You will feel an increase in warmth in the treated area(s).2. Different sensations are possible with use of the system dependingon the individual: 1. NuVita Infrared Light Panels(2 panels)3. Power Supply & CordsQuestion: When will I feel better or see some positive results?You may feel better or experience positive results immediately. Otherindividuals may have to treat themselves over several days or weeksbefore noticing results. It is important to remember that we are all unique;various physical conditions can affect results.2. NuVita Infrared Light Stand(3 pieces)Mounting Bracket4. Panel Connector Wire5. Velcro® StrapQuestion: How often can I use the NuVita Infrared Light TherapySystem?We recommend 2 (17 minutes each) treatments per day.Question: How does the NuVita Infrared Light Therapy System helpwith my everyday aches and pains?The NuVitaInfrared Light Therapy System can be used for temporaryrelief of pain by emitting energy in the Near-IR spectrum. It is intended forthe relaxation of muscles and relief of muscle spasms; temporary relief ofminor muscle and joint aches, pains and stiffness; temporary relief of minorpain and stiffness associated with arthritis; and to temporarily increase localblood circulation.Column6. Operating ManualQuestion: How close to the skin should I hold the NuVita ILT Panel ?For best results the panel should be as close to the skin as possible butCenter the panels on the main area of treatment for maximum effectiveness.Base510
INSTRUCTIONS FOR TEMPORARY RELIEF OF PAINASSEMBLY INSTRUCTIONS (CONTINUED)Dual Panel Use With Stand:1. Place both panels on stand.2. Attach Panel Connector Wirebetween panels.2. Assemble Stand (3 pieces).3. Attach Power Supply to Panel.4. Plug Power Supply into electricaloutlet.6. Place body part ( hands, arm,from LED panels.You will hear a beep and thelights will come on. You canonly see the red LEDs; theothers are in the infraredspectrum and can’t beseen with the human eye. The unit will beep in oneminute intervals for a totalof seventeen minutes.7. The unit will automatically turn off atthe end of the 17 minute treatmentcycle. Device takes 8 minutes toreach target temperature on skin.Total time for treatment is 17minutes. Column (1)3. Attach NuVita Infrared Light Panels to stand.The panels are different. The “Master” panel (A) has 2 plugs and aswitch along the bottom edge.Align tabs and slide Master panel (A) onto right side of Mounting8. To quit before treatment is over,Right PanelMaster (A)Recommended Usage: We recommend 2 (17 minutes each)treatments per day.96
Page 2: IndexPersonal NotesItemPageProduct

and Operating Manual User Guide

Create successful ePaper yourself

Delete template?

Save as template?