12.07.2015 Views

ROF SERIES 19" FREE STANDING RACKS - Conteg

ROF SERIES 19" FREE STANDING RACKS - Conteg

ROF SERIES 19" FREE STANDING RACKS - Conteg

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

The <strong>ROF</strong> rack is designed to cope with the demanding needs of IT equipment within the datacenter, equipment room and network or telecommunications closet. The <strong>ROF</strong>’s flexible configurationoptions mean that it’s easy to tailor the solution to your exact requirements. Various height, depthand width options, along with load rating of up to 1000kg, air-flow optimization solutions and flexiblecable management mean that it has never been simpler to custom configure a cabinet that meets yourrequirements.COLOR SAMPLER:DESCRIPTIONSizes• Height: 15, 18, 21, 24, 27, 33, 36, 42, 45, 48U• Width: 600, 800mm• Depth: 600, 800, 1000, 1200mmConstruction• Welded frame construction• 1.5 & 2.0mm sheet steelLoad rating• Standard 300kg (15-33U), 400kg (36U) and500kg (42-48U) for 600, 800 and 1000mmdeep racks• Standard 1000kg for 1200mm deep racksIP rating• Standard IP30• Optionally IP54 (required for A/C unitinstallation)• IP20 when perforated doors usedColors• Standard RAL 7035 and 9005• Optionally other colorsFront door• Tinted security glass door• Swivel handle lock assembly - singleor multipoint, optionally cylinder orcombination lock (other locks on request)• Door opening angle 1800• Easy re-hanging to open on right or left• Optionally steel, vented, perforated, glasswith perforation, vertically divided doorRear panel• Removable with module for cable entry• Optionally can be replaced by full rangeof doorsSide panels• Removable with locksCable entries (300x100mm)• Top, bottom and rear plate• Racks 800mm wide have additional cableentries in top and bottom plate• All cable entries covered by removable blankpanelsVentilation unit openings• Top, bottom plate• All ventilation unit openings covered byremovable blank panelsFeet• Adjustable feet as standard; castors, lockablecastors, plinth, or plinth with filter optionallyAdaptation• Possibility to adapt for installation of 21"equipment (on request)• Adaptor DP-RE-01 needed (ordered separately)Other• Racks can be installed in blocks by using DP-DR-UNI (ordered separately)• GND/earthing kit included<strong>ROF</strong>-42-80/80

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!