alumina/titania chromia/titania - VeMet

More documents

Recommendations

Info

• Wear resistance of a material isdetermined when relative motionis caused between an abrasiveand a contact pin of the testmaterial• According to ASTM G132-96
• Contact force: Actual cylinder pressure• Abrasive: Dry grit• Advantages:• Scratching abrasion of piston rod• Seal guide and scraper behavior• Piston seal behavior• Tests carried out at actual cylinder pressure
Page 2: • Wear in general has a yearly lo
Page 5 and 6: Coating Process B.C. T.C. Service E
Page 7: DRY ABRASION TESTWET PARTICLE ABRAS
Page 11 and 12: Mpa80Bondstrength according to ASTM
Page 13 and 14: • Tested samples Alumina/Titania
Page 15 and 16: • Porosity is determined usinga p
Page 17 and 18: Coating Code Thickness Process Subs
Page 19 and 20: Hard chromium (G1) has anOCP of -34
Page 21 and 22: Mineral oil and water glycolfluids
Page 23 and 24: • Different surface profiles with
Page 25 and 26: • Profile is function of way of m
Page 27 and 28: Electro polymerization (monomer > p
Page 29 and 30: • Current:Directly effects temper
Page 31 and 32: Electrochemical Potential[V] vs. sa
Page 33 and 34: • Under corrosion in the bottom z
Page 35 and 36: • Dissolving of Alumina outof Alu
Page 37 and 38: • Blistering due to under corrosi

alumina/titania chromia/titania - VeMet

Create successful ePaper yourself

Delete template?

Save as template?