Contents - Rieber GmbH & Co. KG
Contents - Rieber GmbH & Co. KG
Contents - Rieber GmbH & Co. KG
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
� To start the function, press the START button.<br />
Cleaning, maintenance and care<br />
▌ The appliance will maintain this temperature until you make another<br />
entry.<br />
▌ The status indicators will show you the current status of the function.<br />
▌ When the appliance has reached the set chamber temperature, an<br />
acoustic signal will sound.<br />
▌ You have set up and started the Chamber Temperature function.<br />
� The moisture in the cooking chamber is controlled by means of the steam valve on<br />
the front of the appliance.<br />
8 Cleaning, maintenance and care<br />
The chapter will help you to meet the hygiene requirements. Before reading this section, please read through<br />
the "General safety instructions" section thoroughly first.<br />
8.1 Safety information relating to cleaning, maintenance and care<br />
Avoid dangers due to hot parts or areas<br />
WARNING!<br />
Danger of burning one's hands and arms on the hot surfaces around the hot cooking<br />
modules.<br />
► Allow the appliance to cool down.<br />
► Wear protective gloves.<br />
► Keep unauthorised persons away from the appliance.<br />
Avoid dangers by pointed parts<br />
� WARNING! Danger of injury when handling the core temperature sensor.<br />
Avoid dangers due to electricity<br />
WARNING!<br />
Danger of electric shock. Risk of death.<br />
► Every time before you clean the appliance, turn the appliance off and unplug the<br />
mains connector.<br />
► Never direct a jet of water at electrical components, such as control panel, or the<br />
ventilation opening.<br />
► Do not use a steam cleaning unit to clean electrical appliances. Doing so may allow<br />
moisture to get into the electrical system and cause a short circuit.<br />
► Check the heating and mains cable for any damage.<br />
► Electrical equipment should be inspected by a qualified electrician at least every<br />
6 months.<br />
<strong>Rieber</strong> <strong>GmbH</strong> & <strong>Co</strong>. <strong>KG</strong> 19