Temel Tanımlar - Gebze Yüksek Teknoloji Enstitüsü

ME 612Metal Forming and Theory of PlasticityReferences[1] Johnson, W. and Mellor, P.B., Engineering Plasticity, New York Van Nostrand Reinhold.[2] Hosford, W.F. and Caddell R.M., Metal Forming Mechanics and Metallurgy , Prentice Hall International Editions.[3] Johnson, W., Upper Bound Loads for Extrusion Through Circular Shaped Dies , Appl. Sci. Res. Series A, Vol. 7, p. 437, 1958.[4] Liu, J.Y., Upper Bound Solutions of Some Axisymmetric Cold Forging Problems, Transactions of the ASME, Journal ofEngineering for Industry, pp. 1134‐1144, November, 1971.[5] Nagpal, V., Lahoti, G.D. and Altan, T., A Numerical Method for Simultaneous Prediction of Metal Flow and Temperatures inUpset Forging of Rings, Transactions of the ASME, Journal of Engineering for Industry, November, Vol. 100, pp. 413‐420,1978.[6] Avitzur, B., An Upper Bound Approach to Cold Strip Rolling', Journal Engineering Industry, ASME, Paper No: 63 Prod. 8.[7] Hosford, W.F. and Caddell, R.M., Metal Forming Mechanics and Metallurgy, Prentice Hall International Editions, pp. 115‐ 138,1983.[8] Akgerman, N. and Altan, T., Modular Analysis of Geometry and Stresses in Closed Die Forging: Application to a Structural Part,Transactions of the ASME, Journal of Engineering for Industry, November, PP.1025 1034, 1972.[9] Hosford, W.F. and Caddell, R.M., Metal Forming Mechanics and Metallurgy, Prentice Hall International Editions, pp. 168‐ 201,1983.[10] Johnson, W., Sowerby, R. and Haddow, J.B., Plane Strain 132ip Line Fields: Theory and Bibliography, New York, AmericanElsevier, 1970.[11] Boor, F., Modelling of deep drawing of complex shaped components using slip line methods, Proceedings of 30 th InternationalMATADOR Conference, UMIST, Manchester, McMillian Ltd., pp. 217‐225. 1993.Dr. Ahmet Zafer ŞenalpME 612GYTE-Makine Mühendisliği Bölümü3