Hardtop Flexi Standard - Comp. B - Marine_Protective - English - Jotun

More documents

Recommendations

Info

Hardtop Flexi Standard - Comp. B Page: 4/88 .Exposure controls/personal protectionTWA: 0,005 ppm 10 hour(s).TWA: 35 µg/m³ 10 hour(s).CEIL: 0,02 ppm 10 minute(s).CEIL: 140 µg/m³ 10 minute(s).Engineering measuresEyesSkinRespiratoryHands :Hygiene measures9 .: Use only with adequate ventilation. Use process enclosures, local exhaust ventilation orother engineering controls to keep worker exposure to airborne contaminants below anyrecommended or statutory limits. The engineering controls also need to keep gas, vaporor dust concentrations below any lower explosive limits. Use explosion-proof ventilationequipment.:::Safety eyewear complying with an approved standard should be used when a riskassessment indicates this is necessary to avoid exposure to liquid splashes, mists ordusts.Personal protective equipment for the body should be selected based on the task beingperformed and the risks involved and should be approved by a specialist before handlingthis product.Use a properly fitted, air-purifying or air-fed respirator complying with an approvedstandard if a risk assessment indicates this is necessary. Respirator selection must bebased on known or anticipated exposure levels, the hazards of the product and the safeworking limits of the selected respirator.Chemical-resistant, impervious gloves complying with an approved standard should beworn at all times when handling chemical products if a risk assessment indicates this isnecessary.: Wash hands, forearms and face thoroughly after handling chemical products, beforeeating, smoking and using the lavatory and at the end of the working period. Appropriatetechniques should be used to remove potentially contaminated clothing. Washcontaminated clothing before reusing. Ensure that eyewash stations and safety showersare close to the workstation location.Physical and chemical propertiesPhysical stateFlash pointColorOdorRelative densityVOCSolubility: Liquid.: Closed cup: 38°C (100,4°F): Various colors.: Characteristic.::1.08 g/cm 32.24 pounds/gallon (US)9.01 pounds/gallon24,8 % (w/w) [ISO 11890-1]: Insoluble in the following materials: cold water and hot water.10 .Stability and reactivityStability and reactivityHazardous decompositionproductsHazardous polymerization11 .:::The product is stable.Toxicological informationChronic effects on humansOther toxic effects onhumansContinued on next page::Under normal conditions of storage and use, hazardous decomposition productsshould not be produced.Under normal conditions of storage and use, hazardous polymerization will notoccur.CARCINOGENIC EFFECTS: Classified A4 (Not classifiable for humans or animals.)by ACGIH, 3 (Not classifiable for humans.) by IARC [xylene]. Classified A3 (Provenfor animals.) by ACGIH, 2B (Possible for humans.) by IARC [ethylbenzene].Based on the properties of the isocyanate components and considering toxicologicaldata on similar preparations, this preparation may cause acute irritation and/orsensitization of the respiratory system, leading to an asthmatic condition, wheezingand tightness of the chest. Sensitized persons may subsequently show asthmaticsymptoms when exposed to atmospheric concentrations well below the OEL.Repeated exposure may lead to permanent respiratory disability.Exposure to component solvent vapor concentrations in excess of the statedoccupational exposure limit may result in adverse health effects such as mucousmembrane and respiratory system irritation and adverse effects on the kidneys, liverand central nervous system. Symptoms and signs include headache, dizziness,
Hardtop Flexi Standard - Comp. B Page: 5/811 .Toxicological informationfatigue, muscular weakness, drowsiness and, in extreme cases, loss ofconsciousness.Repeated or prolonged contact with the preparation may cause removal of natural fatfrom the skin, resulting in non-allergic contact dermatitis and absorption through theskin. Repeated or prolonged contact with irritants may cause dermatitis. If splashedin the eyes, the liquid may cause irritation and reversible damage.Specific effectsCarcinogenic effectsMutagenic effectsReproduction toxicityChronic effects12 .Ecological informationEcotoxicity dataProduct/ingredient namexyleneethylbenzeneEnvironmental precautionsProducts of degradation13 .Disposal considerationsWaste disposal::::Contains Hexamethylene diisocyanate, oligomers, hexamethylene-di-isocyanate.May produce an allergic reaction.Contains material which may cause cancer, based on animal data. Risk of cancerdepends on duration and level of exposure.No known significant effects or critical hazards.No known significant effects or critical hazards.No known significant effects or critical hazards.Species Period ResultOncorhynchus mykiss (LC50)Oncorhynchus mykiss (LC50)Lepomis macrochirus (LC50)Lepomis macrochirus (LC50)Lepomis macrochirus (LC50)Pimephales promelas (LC50)96 hour(s)96 hour(s)96 hour(s)96 hour(s)96 hour(s)96 hour(s)Daphnia magna (EC50) 48 hour(s)Daphnia magna (EC50) 48 hour(s)Selenastrum capricornutum 48 hour(s)(EC50)Oncorhynchus mykiss (LC50) 96 hour(s)Pimephales promelas (LC50) 96 hour(s)Poecilia reticulata (LC50) 96 hour(s)3.3 mg/l8.2 mg/l8.6 mg/l12 mg/l13.3 mg/l13.4 mg/l2.93 mg/l2.97 mg/l7.2 mg/l4.2 mg/l9.09 mg/l9.6 mg/l: No known significant effects or critical hazards.: Products of degradation: carbon oxides (CO, CO2) and water, nitrogen oxides (NO, NO2etc.).:The generation of waste should be avoided or minimized wherever possible. Significantquantities of waste product residues should not be disposed of via the foul sewer butprocessed in a suitable effluent treatment plant. Dispose of surplus and non-recyclableproducts via a licensed waste disposal contractor. Disposal of this product, solutionsand any by-products should at all times comply with the requirements of environmentalprotection and waste disposal legislation and any regional local authority requirements.Waste packaging should be recycled. Incineration or landfill should only be consideredwhen recycling is not feasible. This material and its container must be disposed of in asafe way. Care should be taken when handling emptied containers that have not beencleaned or rinsed out. Empty containers or liners may retain some product residues.Vapor from product residues may create a highly flammable or explosive atmosphereinside the container. Do not cut, weld or grind used containers unless they have beencleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contactwith soil, waterways, drains and sewers.Disposal should be in accordance with applicable regional, national and local laws and regulations. Localregulations may be more stringent than regional or national requirements.The information presented below only applies to the material as supplied. The identification based oncharacteristic(s) or listing may not apply if the material has been used or otherwise contaminated. It is theresponsibility of the waste generator to determine the toxicity and physical properties of the material generated todetermine the proper waste identification and disposal methods in compliance with applicable regulations.Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTIONContinued on next page
Page 1 and 2: Trade nameCodeMaterial usesManufact
Page 3: Hardtop Flexi Standard - Comp. B Pa
Page 7 and 8: Hardtop Flexi Standard - Comp. B Pa

Hardtop Flexi Standard - Comp. B - Marine_Protective - English - Jotun

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?