SDM 903 - SPC

Protects the engine against corrosion from arduous acidic combustion by-products withgood antirust and anticorrosion properties.Protects against the formation of varnish and gums at elevated temperatures.Resists thickening, oil line and filter plugging due to the outstanding oxidation inhibitorsare used.APPLICATIONSSPC SDM 903 is recommended for use in diesel engines, such as high speed, four-stroke,turbocharged or naturally aspirated engines operating under very severe conditions. It issuitable for both highway, off-highway vehicular diesel engines where SHPD oils andextended drain intervals are required.Meets 2004 exhaust emission standards and is recommended for use in the latest exhaustgas recirculation (EGR) engines.SPC SDM 903 can be used in place of CG-4, CH-4 and mixed fleets of gasoline engines.TYPICAL CHARACTERISTICSSPC SDM 903SAE Grade15W40Viscosity, Kinematicat 40 °C, cSt 113.4at 100 °C, cSt 14.9Viscosity, Apparentat -20 °C, cP 6400Viscosity Index 136Specific Gravity, 15/15 °C 0.878Flash Point, COC, °C 224Pour Point, °C -30TBN, mgKOH/g 11.0The above figures are typical of current production and do not constitute a specification. Minor variations may occur.11 November 2011SDM 903.docAll the information contained in this document is considered to be accurate as of the date of printing. No warranty or representation, expressed or implied,is made as to the accuracy of the data and information in this publication. It is the user’s obligations to evaluate and use the products safely andto comply with all applicable laws and regulations. For more information, please contact your sales representative.